• Journal of Gifted/Talented Education
• /
• v.26 no.1
• /
• pp.53-76
• /
• 2016

This research studies the perception to gifted education teachers between the middle school gifted education for STEAM and Convergence Gifted Education for revitalizing Convergence Gifted Education. The conclusions according to the analysis, it shows that the awareness of gifted education teachers for Convergence Gifted Education is lower than the level of the awareness for STEAM, and it appears that the Gifted education teachers especially has the experience adapting Convergence Gifted Education who awareness for Convergence Gifted Education is the highest. On the other hand, not only teachers has the experience adapting Convergence Gifted Education and the very poorly recognition for the task of Comprehensive Plan for Gifted Education promotion including the development of an creative and convergence content, a they has the very low experience for the development. And it analyzes that although there is no meaningful differences, teachers who are in science gifted teachers and the mature experienced man realizes very optimistically the necessity need of Convergence Gifted Education. Therefore, it analyzes that recognition to the necessity need of Convergence Gifted Education is reinforced through the training for the gifted teachers in the mathematics gifted education and in less teaching experience. But it points out that answers over the majority cognized to resemble the Convergence Gifted Education and STEAM, though the object is only different. Furthermore, it suggests that the differentiated Convergence Gifted Education curriculum providing the suitableness for the characteristic and level is needed for the desirable fixedness.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.38-49
• /
• 2018

The nursing education with evidence-based practice(EBP) should set a differentiated education strategy according to the level of the learner, so that the students experience it step by step and it leads them to be skilled. The purpose of this study was to integrate and operate the EBP in the fundamental nursing classes of the second grade students and to verify the effectiveness on improvement of EBP basic competency of them. A non-equivalent control group pretest-posttest design was used. The subjects were 108 students in the second year of nursing at the two universities. The experimental group participated in the class for 8 weeks and 24 hours during the 15-weeks, second semester 2016 and the control group participated in general fundamental nursing class. Data were collected proactivity in problem solving, future use of EBP, and critical thinking disposition instrument and analyzed using SPSS/WIN 23.0 program with Chi-square test, independent t-test. The experimental group had a significant increase in proactivity in problem solving and future use of EBP compared to the control group. However, there was no significant difference in critical thinking disposition between the two groups. Findings indicate that the fundamental nursing class used EBP was an effective lesson to improve proactivity in problem solving and future use of EBP, which is the EBP basic competency for the lower grader. Long-term efforts are needed to improve the EBP competence and critical thinking of nursing students by curriculum appropriate to grade-based goals of EBP.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.255-262
• /
• 2010

The purpose of this study is to provide preliminary data on chloride diffusion of lightweight aggregate concrete containing crushed stone-powder. Accordingly, the study performed experiments using concrete aggregates of Crushed Aggregate (CG), Single-sized Lightweight Aggregate (SLG), Continuous Graded Lightweight Aggregate (CLG), and using water-binder ratio of 0.4, 0.5, 0.6, and using binder of FA and BFS. The chloride diffusion coefficient is calculated according to the NT BUILD 492. Diffusion coefficient of SLG and CLG were higher than that of CG concrete, but the difference was not significant. Also, chloride diffusion coefficient data indicated that it was highly affected by water-binder ratio, and it decreased with the decrease in waterbinder ratio. The admixture substitution of FA15% was effective in decreasing the diffusion coefficient only with water-binder ratio of 0.4 while admixture substitution of FA10+BFS20% was effective with all levels of water-binder ratio. The result of study shows lightweight aggregate concrete containing crushed stone-powder has slightly higher chloride diffusion coefficient than CG concrete, but the difference is not significant such that it can be overcome by adjusting water-binder ratio and admixture substitution. In addition, the data indicate the chloride diffusion coefficient of lightweight aggregate concrete can be estimated from the strength of lightweight aggregate.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.1
• /
• pp.120-127
• /
• 2006

The hammer-milled characteristics of waste wood materials such as lumber, plywood, particleboard(PB), MDF and railroad tic were investigated in this study. The physical and mechanical properties of recycled boards according to types of recycled particle and the mixing ratios were also studied. The hammer-milled, waste wood materials had the dimensional distributions suitable for the core layer panicle. Bending strengths of recycled boards (one layer) were shown in order of plywood, PB(laboratory-fabricated with particles used in the PB factory), lumber, tego film-overlaid plywood, MDF, waste railroad tie, PB(factory-made) and LPL-overlaid PB. Cured resin and creosote containing waste wood contributed to dimensional stability of reconstituted boards. Considering the mixing effects between lumber and plywood with recycled PB particle, lumber particle was contributive to bending strength, MOE and internal bond(IB) strength, whereas plywood particle was contributive to dimensional stability. The bending and IB strength of 3 layer boards composing only recycled waste wood particles in core layer of board were in order of lumber, plywood, PB and MDF. On the other hand, the thickness swelling was in order of PB, lumber, plywood and MDF. Bending strength of the 3 layer boards mixed with recycled PB-particle in the core layer had a decreasing tendency, as the mixing ratios of recycled PB-particles increased. The dimensional stability of 3 layer recycled board was improved as the mixing ratio of recycled PB-particle increased same as in one layer. Formaldehyde emission of boards fabricated with recycled PB-particles in the core layer of the PB was in the range of E2 grade (below 5.0mg/l).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.285-290
• /
• 2005

This study was aimed to determine microbiological Quality by adding green tea extracts to cook-chill foods. For this study, Pyeonyuk were blended with green tea extracts to different concentrations of 0, 2 and 3% and prepared in a cook-chill system. Microbiological effects of green tea extracts were assessed during production process by measuring process time, temperature, pH and A wand determining total plate counts and coliforms. Effects of green tea extracts on total plate counts and coliforms were observed during cold storage at 3$^{\circ}C$ for five days. Green tea extracts improved the microbiological Quality and showed antibacterial properties when they are added to Pyeonyuk prepared in a cook-chill production system. The use of green tea extracts can be further explored as a means of enhancing freshness and Quality in cook-chill foods.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.46-55
• /
• 1993

조종사가 수행하는 조종 업무는 여러 정보를 동시에 지각하여 처리하여 야 하는 복잡한 작업으로 구성되어 있어, 조종사에게는 고도의 인간성능이 요구되고 있다. 또한 조종기술을 습득하기 위해서는 많은 훈련시간과 비용 이 소요되며, 조종사의 실수는 치명적인 사고를 초래한다. 따라서 조기에 비행 부적격자를 판별하고, 미흡한 조종 적성을 함양시킬 수 있는 교육 . 훈련 프로그램을 조종 후보생에게 적용시키는 분석적 조종적성 진단 체계 개발은 조 종사의 도태율 감소, 효율적인 비행훈련, 비행 안전사고 감소 등의 측면에서 절실하게 요구되고 있다. 본 연구에서는 조종 업무 수행시 요구되는 여러 인간 기능의 중요도 차이를 조종 적성 평가 체제에 적용하기 위해서, 각 적성 검사 항목들의 상대적 중요도를 분석하고 이의 타당성을 평가하였다. 적성검사 항목의 상대적 중요도 분석은 조종적성검사 계층구조의 각 수준별 쌍체 비교 평가와 AHP(Analytic Hierarchy Process) 분석에 의한 상대적 중요도 산출 및 평가, 그리고 일관성 지수(Consistency Index)에 의한 분석 결과의 조정을 통해 이루어 졌다. 적성검사 항목의 쌍체 비교 평가는 심리기능검사, 비행자질 검사 등 총 29개 적성검사 항목에 대해 검사를 받았고 또한 초등비행 훈련과정을 수료한 조종 학생들에 의해 이루어 졌다. 상대적 중요도를 분석한 결과 심리기능 검사(W=0.30)가 다른 검사에 비하여 조종적성 평가에 중요한 검사로 나타났으며, 세부 항목으로는 주의 분배력(W=0.13), 추적능력(0.06) 등이 상대적으로 중요한 검사 항목으로 나타났다. 또한 상대적 중요도 결과를 적용한 적성검사 성적이 적용하지 않은 적성검사 성적에 비해 비행성적에 대한 예측 능력이 좋은 것으로 평가되었다.al age)가 있다는 것을 의미하는 것이다. 한편, 생산현장에서는 자동화, 기계화가 진보되어 육체적인 노동이 경감된 결과, 중고령자라도 할 수 있는 작업이 많아지고 있다. 또, VDT (Visual Dislay Terminal) 작업과 같은 정보처리 작업의 수요가 증가하여 그 인재의 부족이 지적되고 있다. 따라서 중고령자의 기능을 조사하여 어떠한 작업에 적합한가를 판단하는 것이 중요한 과제로 되었다. 그러나 노동에는 많은 기능이 관여 하고, 그 내용에 따라서 요구되는 기능이 서로 다르기 때문에 노동적응능력의 기본적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.201-212
• /
• 2005

A new strut-tie model using secant stiffness, Direct Inelastic Strut-Tie Model, was developed. Since basically the proposed design method uses linear analysis, it is convenient and stable in numerical analysis. At the same time, the proposed design method can accurately estimate the inelastic strength and ductility demands of struts and ties because it can analyzes the inelastic behavior of structure using iterative calculations for secant stiffness. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and its advantages were highlighted by the comparison with the traditional strut-tie model. The Direct Inelastic Strut-Tie Model, as an integrated analysis/design method, can directly address the design strategy intended by the engineer to prevent development of macro-cracks and brittle failure of struts. Since the proposed model can analyze the inelastic deformation, indeterminate strut-tie model can be used. Also, since the proposed model controls the local deformations of struts and ties, it can be used as a performance-based design method for various design criteria.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.3
• /
• pp.301-315
• /
• 2010

Recently, competition between companies has intensified and so has the necessity of creating a new business value inventions has increased. A numbers of Business organizations are beginning to realize the importance of business process management. Processes however can often not go the way they were initially designed or non-efficient performance process model could be designed. This can be due to a lack of cooperation and understanding between business analysts and system developers. To solve this problem, business process mining which can be used as the basis of the business process re-engineering has been recognized to an important concept. Current process mining research has only focused their attention on extracting workflow-based process model from competed process logs. Thus there have a limitations in expressing various forms of business processes. The disadvantage in this method is process discovering time and log scanning time in itself take a considerable amount of time. This is due to the re-scanning of the process logs with each new update. In this paper, we will presents a modified FP-Tree algorithm for FP-Tree based business processes, which are used for association analysis in data mining. Our modified algorithm supports the discovery of the appropriate level of process model according to the user's need without re-scanning the entire process logs during updated.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.44-66
• /
• 2008

As the way to intensify vocational education, the places to learn and work merge into one educational system and teaching-learning methods that were pointed at lecturer level are adjusted to learners level. However, the current education environment of vocational highschool doesn't keep up with a new teaching and learning paradigm due to the lack of government-level support and the lecturer level education as well. In this paper, we present a novel learner-leading e-Learning teaching & learning contents framework that intensifying self leading education. In this framework, we concern the ability of self leading, space perception and lesson preparation, preferences of multimedia, scholastic aptitude level and achievement level of students in vocational highschool. Moreover, with following the protocol of the suggested model, we generate a new e-learning contents applying to the subject "Introduction to industry". Especially, to perform better quality of contents, we have survey the whole content of the subject and assorted part of it that would work best with learner-leading e-Learning teaching and learning contents. As we tentatively apply e-learning contents to students in vocational highschool, 79% of them replied that contents brought advantages to get school accomplishment, whereas 19% of students answered in negative that contents wasn't helpful than we've expected. Therefore, the statistical results probe that the e-learning contents we proposed show positive effect, and we analyzed the reasons that deteriorate the effects of contents as shortage of budget and copyright limitation.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.25-34
• /
• 2005

The study aimed to develop a tractor drawn animal slurry manure sub-soil injector for arable land and thus, can reduce the waste management cost through effective treatment and utilization of animal slurry manure. The application of animal slurry manure to agricultural land will probably be one of the most effective ways to enrich the soil with vital nutrients. However, some existing slurry manure spenders are not suitable in the field because of their adverse effects to the environment. Based on this premise, a prototype was designed and assembled using 5 sub-soiling standards attached to the sin injector device. The traction force of the Prototype measured in the depth of 10 cm and 15 cm from the ground surface of a paddy field was 1,062 kgf and 1,214 kgf, respectively. A unique feature of the machine was that there was an equal volume of slurry manure flowing from each delivery pipe and regulated by a pressurized container that was likewise synchronized with the speed of the tractor The sub-soiling manure injection system can mitigate or reduce the harmful emission of obnoxious gases and malodor during the injection operation.