• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.141-144
• /
• 2003

This paper proposes an analytical model of off-line feed rate scheduling to obtain an optimum feed rate for high speed machining. Off-line feed rate scheduling is presented as an advanced technology to regulate cutting forces through change of feed per tooth, which directly affects variation of uncut chip thickness. In this paper, the feed rate scheduling model was developed using a mechanistic cutting force model using cutting-condition-independent coefficients. First, it was verified that cutting force coefficients are not changed with respect to cutting speed. Thus, the feed rate scheduling model using the cutting-condition-independent coefficients can be applied to set the proper feed rates for high speed machining as well as normal machining. Experimental results show that the developed fred rate scheduling model makes it possible to maintain the cutting force at a desired level during high speed machining.

• Textile Coloration and Finishing
• /
• v.9 no.6
• /
• pp.51-57
• /
• 1997

The lightness, chroma and hue tolerances with respect to the standard colour position in the CIELAB space have been studied in detail using the various existing data sets and the set form this study. The lightness tolerance showed a clear dependency upon the metric lightness for medium to light colour, but in the case of dark colours there was a discrepancy between the data sets. Both the chroma and hue tolerances showed dependency upon both the chroma and hue-angle and not the single dependency upon the metric chroma, as assumed in the CIE94 formula. New weighting functions were derived from the above experimental evidence, and finally a new formula, LCD(Leeds Colour Difference) was proposed. The LCD formula is nearly as simple and flexible as CIE94 but smoothes the individual weighting functions, especially for lightness tolerances for light colours and chromaticity discrimination near the blue region.

• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.570-579
• /
• 2004

정상상태 압연공정의 오일러리안 공정해석 모델에 관한 연구들을 종합 정리하였다 본 연구의 유한요소해석 모델은 집합조직의 발전에 따른 이방성과 미세기공의 성장에 따른 기계적 성질의 열성화를 평형방정식에 직접 결합하였다 따라서 집합조직의 발전 및 기공률의 변화를 예측하고 동시에 이방성과 기계적성질의 열성화를 해석에 반영할 수 있다. 더불어 오일러리안 해석에서 형상예측을 위하여 자유곡면 수정법과 유선추적법을 유한요소해석 모델에 결합하였다 본 연구의 공정해석 모델을 평판 압연, 클래드압연, 삼차원 사각단면봉의 압연 및 형상압연에 적용하여 집합 조기의 발전, R-값, 항복곡면, 결함성장 등의 기계적성질의 변화 예측과 클래드 압연시에 이중재 접촉면 형상, 배불림, 형상압연 시의 단면변화 등의 형상변화 예측을 보여주었다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.4
• /
• pp.66-72
• /
• 2021

Since the behavior of an autonomous underwater vehicle (AUV) is influenced by disturbances and moments that are not accurately known, the depth control law of AUVs must have the ability to track the input signal and to reject disturbances simultaneously. Here, we proposed robust tracking control for controlling the depth of an AUV. An augmented closed-loop system is represented by an error dynamic equation, and we can easily show the asymptotic stability of the overall system by using a Lyapunov function. The robust tracking controller is consisted of the internal model of the command signal and a state feedback controller, and it has the ability to track the input signal and reject disturbances. The closed-loop control system is robust to parameter uncertainties. Simulation results showed the control performance of the robust tracking controller to be better than that of a P + PD controller.

• 동물약계
• /
• no.30
• /
• pp.4-5
• /
• 1996

1. 신규허가 2. 제조(수입)업 허가사항 변경 3. 사료첨가제 임가공에 대한 질의회신 4. 양축농가 지도계몽 실적조사 5. 가축질병중앙예찰협의회 개최 6. 가축전염병 발생정보 7. 과대광고 금지 8. 건의서 회신 9. 생물학적제제 유통관리 10. 유당사용실적 보고 11. 한국우병학회 창립 12. 대한수의사회 책자발간 13. 돼지 인공수정 책자발간 14. 국검품 수입절차 안내 15. 유방염 치료용 연고제제 색소첨가 16. 제 2 차 이사회 개최

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.273-278
• /
• 1988

This paper represents the computer application techniques of initial and modification machining for dies with 3-dimensional scluptured surfaces. All procedures from die design to die machining and measurement are covered. The component of modelling is data management and modification (extrapolation and smoothing), surface modelling, and nc program preparation. Also this paper introduces the utility for successful and efficient operation of system such as map generation, data communication, tool path verification, contour map generation, graphic processing of extrapolation and smoothing results, and CAD/CAM system interface. Examples are given to illustrate the modelling.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.290-292
• /
• 2000

최근 국대 인터넷 발전과 더불어 검색엔진들의 수요가 많아지고 있어 크고 작은 검색엔진들이 많이 개발되고 있다. 기존의 디지털 라이브러리에 사용되고 있는 정보 검색 엔진인 한글 MG 시스템을 웹 문서 검색에 적용하는데는 어려움이 있었다. 본 논문은 한글 MG 시스템을 기반으로 웹 사이트의 내부 문서 검색이 가능한 소형검색엔진으로 확장하는데 필요한 웹 로봇에 의한 문서 수집, 수집된 문서의 가공, 메타 데이터의 데이터베이스와, 단락 대 문서 사상, 문서 검색을 위한 질의 루틴의 수정과 웹 검색 및 시스템 관리 인터페이스에 대한 방안들을 제안하여 확장 시스템을 설계하고 구현하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.207-209
• /
• 2010

오늘날 네트워크 통신은 다양한 해킹방법들로부터 데이터를 보호하기 위하여 다양한 암호화 알고리즘을 사용하여 통신하고 있다. 이렇게 사용되는 암호화 알고리즘에서 키가 누출되어 해킹되었을 경우 데이터에 대한 정보누출 및 수정, 삭제 등의 데이터 가공을 당하게 된다. 본 논문에서는 이러한 문제를 보완하기 위하여 본래의 데이터를 섞고, 재조립하는 조립알고리즘을 제안한다.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.13-19
• /
• 2013

Ftheta Lens, whose image height is proportional to its field view angle, is one of the most important parts in Laser Scanning Unit(LSU). In this paper $f{\theta}$ lens design, mold production and modification method of lens design and mold are introduced. Lens design was carried out with Zemax and Special Toric surfaces were applied for lens surfaces to minimize distortion both in main and sub scanning directions. And a high precision machine with 1nm resolution was used to fabricate lens mold cores. After injection the lens was evaluated and the difference from design was examined. This difference was compensated by modifying lens design and new lens mold cores were made according to modified lens design to obtain the quality of original design.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1074-1083
• /
• 1993

NC simulation has been used to replace the test cutting of NC machining. Although it can reduce the NC part programming effort, it still has a problem. If any error is found during the simulation, then the part has to be reprogrammed and it is time consumming. This paper presents a method for verifying and editing the NC code after the post-processing without going back to the part programming stage. A data structure and an algorithm to verify and edit the NC code interactively with the aid of graphics is introduced. Z-map method is used for the shaded image display and cross-sectional view display of the macined parts. The method was implemented in a IBM/PC-386 with MS-Windows software, and the multi-window function of the of the MS-Windows is used for the simultaneous editing and verification.