• 소음진동
• /
• 제8권2호
• /
• pp.331-335
• /
• 1998

회전 상태에 있는 증기 터빈 버킷의 진동 시험 및 해석 결과를 본 논문에 기술하였다. 중고압용 터빈 로터에서 9단 휠 도브테일의 치수 변경으로 인해 9단 버킷의 치수 수정이 불가피하였고, 진동 시험과 해석은 수정된 9단 버킷의 고유 진동수가 노즐 통과 주파수로부터 공진을 피할 수 있는 주파수 분리 여유를 갖는지를 검정하기 위하여 이루어졌다. 해석은 상용 유한 요소 해석 프로그램을 이용하였고 실험 전 설계 변경의 성공 가능성 파악 및 후속 시험에 도움을 주기 위해 행하였다 진동 시험은 기존 밸런싱 설비를 이용해 진공 상태에서 회전하고 있는 버킷에 공기 분사 가진및 무선진동신호 측정 시스템을 이용해 행하였다. 시험 결과를 경험식의 결과와 비교하였고, 수정된 버킷이 제시된 주파수 분리 여유를 만족함을 보였다.

• 소음진동
• /
• 제11권3호
• /
• pp.410-415
• /
• 2001

This paper describes an experimental analysis for improving the stability of blade failure due to the vibration resonance, which happens in the low-pressure steam turbine. Some cracks due to high cycle fatigue were found in the blades of a low-pressure turbine after long time operation. Impact test showed that such failure was mainly caused by the resonance. In other words, since one of the natural frequencies of the grouped blade is very close to the excitation frequency of the nozzle, the resonant vibration leads to a large amplitude of displacement and results in a large amount of stress that may cause fatigue failures in the blades. It is interesting that the blade failures occur only at blades neighboring with the nodal points of the natural vibration mode whose natural frequency is close to the nozzle passing frequency. The effective methods for increasing the reliability against the blade vibration are a heightening the fatigue limit of the blade using an advanced material and a removing the resonance away from the operating speed. It is well known that the removal of theresonance could be obtained by the installation of different types of shrouds, wires, and links between the blades as well as by the chance of the number of nozzles. In the present work, two kinds of modification for avoiding the resonance haute been considered; 1) slot-type finger, 2) long span cover. Full-scale mockup tests have been performed in order to confirm the verification for modification in the shop. Test results show that the use of long span cover is very useful to change the natural frequencies of the grouped blade and to avoid the resonance effectively.