• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.33-36
• /
• 2001

고흡수성 고분자는 이온성기를 가진 수용성 고분자에 부분적인 가교결합을 도입하여 일반적으로 카르복실기 이온 (-COO-)등과 같은 친수성기를 다량으로 지닌 3차원 망상구조를 지니는 수용성 고분자이다[1]. 여지껏 물을 흡수하는 목적으로 사용된 흡수소재는 면, pulp, sponge 등이 일반적으로 알려져 있다. 이들은 모세관 현상에 의해 물을 흡수하는 것으로 알려져 있으며, 이들 흡수 재료의 흡수능력은 자기 무게의 수백 배로부터 천 배까지의 물도 흡수하며 외압하에서도 잘 탈수되지 않는 고기능성 고분자이며 그 원리는 다음과 같다. (중략)

• Proceedings of the Korean Printing Society Conference
• /
• 2001.06a
• /
• pp.91-91
• /
• 2001

환경문제에 대해 오래 전부터 관심을 가져온 선진국은 잉크의 수성화에 주력하여 왔으며, 그 결과 이미 수용성 소재의 양산체재에 들어가 수성 원료 사업을 대형화하는 추세에 있다. 이에 한화석유화학 중앙연구소에선 스티렌/아크릴계 수용성 High Solid 수지를 개발하여, 수성 잉크용 분산제, Resin Fortified Emulsion (RFE), UV Resist 잉크, 수성코팅제, 바닥광택제 등에 적요하기 위한 응용기술을 개발하였다. 본 연구는 수성 잉크의 주요 구성 성분인 grinding vehicle. let-down vehicle로 사용되는 수용성 High Solid 수지 (SAA 수지) 및 이를 이용한 에멀젼 수지의 합성과 수성 잉크로의 응용에 대한 것이다. SAA(HCC Soluryl Resin) 수지는 구조적으로 Styrene, Alpha-methyl Styrene, crylic Acid의 삼원공중합체이며 약 70%의 소수성 물질과 30%의 친수성 물질이 Random 하게 중합되어 있으며 약 5000∼15000정도의 낮은 분자량을 가진 물질로, 고고형분에서도 낮은 점도를 유지하기 위하여 분자량과 좁은 분자량과 좁은 분자량을 가지는 수지를 연속벌크중합방법으로 합성하였다. 또한 이를 고분자 유화제로서 사용하여 수지보강 에멀젼수지 (RFE 수지, HCC Soluryl Emulsion) 를 제조하는데 사용하였으며, SAA수지 및 RFE수지를 수성잉크용 분산제, 잉크 바인더용으로 적용하였다.

• Composites Research
• /
• v.12 no.6
• /
• pp.15-21
• /
• 1999

Carbon fibers were coated with carboxy modified poly(hydroxy ether)(C-PHE, water dispersed), water soluble polymers poly(hydroxy ether ethanol amine)(PHEA) or water insoluble poly(hydroxy ether)(PHE). Interfacial shear strength of polymer coated carbon fibers was measured by micro-droplet tests with vinyl ester resin, and approximately 30 samples were tested. The interfacial adhesion of poly-mers to carbon fibers was also evaluated, and diffusion behavior of polymer films in vinyl ester resin was investigated. The carbon fibers after testing and diffusion samples were analysed by SEM in order to understand adhesion mechanism. Interfacial shear strength of carbon fibers was enhanced by the coating of PHE and C-PHE which have good or marginal solubility in vinyl ester resin, respectively, but not by the coating of PHEA possibly due to the poor solubility in vinyl ester resin.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.21-24
• /
• 1998

흡수성 고분자는 주로 기저귀, 생리대, 농업용 뿌리 덮개 등에 사용되며, PAN(폴리아크릴 로니트릴) 그라프트 전분으로 대표되는 그라프트 공중합체와 가교된 아크릴레이트 고분자로 대표되는 수용성 단량체의 단중합체 또는 공중합체 등에 대한 연구가 가장 활발히 이루어져 왔다. 이들 고흡수성 재료들은 염용액에 대한 흡수도가 낮다는 단점이 있으며, 보다 강한 이온기를 도입하거나, 고흡수성 재료가 양쪽성을 나타낼 경우, 염에 대한 흡수도가 개선된다는 연구결과가 보고된바 있다. (중략)

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.556-563
• /
• 2000

In general, the development of thermoplastic composites has been confronted with difficult problems such as the weak bonding strength between fibers and matrix. However, now, such problems are being surmounted by the development of resins, the improvement of processes, and introduction of interphase. Especially, the introduction of interphase between fiber and matrix can help a dissipation of the impact energy and provide a good adhesion between fibers and matrix. In this study, polymeric interphase was introduced by electrodeposition, modified polypropylene was added to improve the weak bonding strength between interphase and polypropylene matrix. By evaluation of interlaminar shear strength and impact strength of the composites, it was found that composites with introduced composites showed higher mechanical properties than those of composites without interphase. Reactive polymers which have either anhydride or free acid functional group were used as interphase materials, and these polymers also behave as charge carrier in aqueous solution during the electrodeposition process. Weight gain on the carbon fibers was evaluated by changing process parameters such as concentration of solution, current density, and electrodeposition time.

• Analytical Science and Technology
• /
• v.5 no.1
• /
• pp.1-5
• /
• 1992

The adsorption amount of petroleum oil on XAD-4, XAD-7 and replacement adsorbents as rice bran, rice straw and sawdust were studied by using batch method measured in the optimum adsorption condition. The adsorption capacity of rice bran and rice straw of petroleum oil were excellent as well as adsorption ability about 50% of XAD resins and adsorption capacity of their replacement adsorbents were increased with optimum condition that pyrolysis time was 30 min. at $200^{\circ}C$. Adsorption ability of sawdust was very weak on the 30% MeOH aqueous medium but adsorption ability was range of about 50% of XAD resin's adsorption capacity on the 0.5M NaCl aqueous medium. Adsorption ability of rice bran and rice straw showed the same adsorption capacity even if difference external structure. Therefore, showing that rice bran and rice straw were have to good adsorption ability as replacement adsorbent for XAD resins.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.343-349
• /
• 2014

Currently, in order to resist the scratching of the fuel rod surface while fabricating the fuel assembly of the light-water nuclear reactor, we use a solution of nitrocellulose, an explosive material, as a dry lubricant along with its solvent. However, the demand for developing safe and harmless aqueous alternative materials for environment-conservation and field-worker safety has increased. In this study, we demonstrate the preparation of a novel aqueous resin composite using a formulation of aqueous polymeric resin, alcoholic solvent, and water. Subsequently, we characterize this composite on the basis of hardness, adhesive property, and water solubility using plates similar to the fuel rod material. The insertion test of a fuel rod coated with the YS-3 composite shows load values of $18.8-20.5kg/cm^2$, which is comparable with $18.8-20.5kg/cm^2$ of the nitrocellulose coating agent. In addition, the depth and width of longitudinal scratches caused by the YS-3 composite test are 50% higher than those of the standard. We can develop a harmless and safe aqueous dry lubricant to replace the existing NC products through field testing of 264 pieces of fuel rods, after producing 350 kg of the YS-3 prototype. The scratch test for the rod surface showed that weight of chip of YS-3 prototype was smaller than that of NC before and after solvent treatment, indicating the properties of YS-3 prototype was comparable to the counterpart.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.421-427
• /
• 1996

Ethyl carbamate is an animal carcinogen and a suspected human carcinogen found in fermented foods and beverages. For the determination of ethyl carbamate in typical Korean diet, an analytical method was established for the food as complex as Kimchi. Kimchi samples collected from various locations in the country were homogenized and extracted four times with ethyl acelate. Following concentration and reconstitution with water, the extract was loaded onto $C_{18}$ column. Fraction containing ethyl carbamate was eluted with methanol, while most of the red pigment of the sample was retained on the column. The eluent was further purified with alumina, followed by Florisil column. The final eluent was analyzed by gas chromatography mass spectrometry in the selected ion monitoring mode. None of the twenty Kimchi samples showed ethyl carbamate level higher than 4.6 ppb without correction for the recovery. The concentration of ethyl carbamate in Kimchi increased as pH decreased, suggesting fermentation dependent formation of ethyl carbamate.

• Clean Technology
• /
• v.11 no.1
• /
• pp.41-50
• /
• 2005

In this study, semibatch emulsion copolymerization of n-BA as adhesive component and MMA as coagulant component were carried out for the stable acrylic polymer latex in aqueous phase for polymer cement using LE-type nonionic surfactant as environmental friendly surfactant. The stable polymer emulsion was obtained with the increases of chain length(n) of this surfactant. The effect on the amount of LE-50 as nonionic surfactant were showed that the concentration of polymer latex were increased by increasing the amount of LE-50, whereas the average particle size were decreased by increasing the amount. The addition of functional monomer in initial reactor charge showed a significant effect on the final polymer concentration and the latex particle size. The single polymerization of each n-BA or MMA showed a very low concentration of polymer latex and very big particle size due to coagulation. In the polymerization composed of mixed monomer with MMA and n-BA, the larger the ratio of MMA to n-BA in the copolymers, the greater the amount of coagulum produced. It was found that a stable copolymers were obtained in the range of 15-35 % of n-BA. Moreover, incorporation of some functional monomers in addition to of main monomers became more stable polymer latex. Through DSC and IR analysis, the final polymer latex was composed by MMA/n-BA/AA/AM with a single Tg depending on the reaction conditions. As a result, the conditions of this acrylic polymerization could also be effectively controlled to get the desired final products.