• Cement
• /
• s.112
• /
• pp.21-29
• /
• 1988

• The Journal of Engineering Research
• /
• v.3 no.1
• /
• pp.223-233
• /
• 1998

The kinetic and mechanism of the hydrothermal reaction between lime and quartz used solid state reaction equations have been investigated. Hydrothermal reaction on the starting materials was carried out in an autoclave that quartz mixed with calcium hydroxide in CaO/$SiO_2$ ratio of 0.8-1.0 for 0.5-8 hour at saturated steam pressure of $180-200^{\circ}C$. The rate of reaction was given from the ratio of uncombined lime and quartz content to the total lime and quartz content. The rate of reaction was obtained the results by the Jander's equation $[1-(1-\alpha)^{1/3}]^N=Kt$. The reaction of lime is controlled mainly by the dissolution such as N=1, and the reaction of quartz is controlled mostly by the diffusion such as $N\risingdotseq2$. The rate of hydrothermal reaction in the calcium silicate hydrates system is suggested to be determined generally by the mass transfer through the product laver formed around the reactant particles. The rate equation for whole hydrothermal reaction is shown that it is converted into the rate determining step by the diffusion from the boundary reaction such as approximately $N=1-2$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.35-45
• /
• 2017

In order to improve the anaerobic digestion efficiency of the sewage sludge, the methane potential of the hydrolysate generated from the hydro-thermal reaction at 170, 180, 190, 200, 210, $220^{\circ}C$ was analyzed and the constitutional characteristics of the organic materials were estimated by dividing organic materials of hydro-thermal hydrolysate into easily biodegradable, decomposition resistant, and non-biodegradable organic materials applying the parallel first order kinetics model. The ultimate methane potential of sewage sludge hydro-thermal hydrolysate increased to 0.39, 0.39, 0.40, 0.44, 0.45, and $0.46Nm^3/kg-VS_{added}$ as hydro-thermal reaction temperature increased from 170, 180, 190, 200, 210, $220^{\circ}C$. It has been shown that the organic matter of sewage sludge is solubilized to increase the content of biodegradable organic material($VS_B$). The easily degradable organic matter($VS_e$) content was highest at hydro-thermal reaction temperature of 200 and $210^{\circ}C$, and optimum hydro-thermal reaction temperature for organic matter solubilization of sewage sludge was in the range of $200{\sim}210^{\circ}C$. In addition, the amount of biodegradable organic material($VS_B$) and easily biodegradable organic matter ($VS_e$) in the hydrolysate of sewage sludge was the highest at hydro-thermal reaction temperature of $200^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.370-376
• /
• 1998

The powder preparation of Zinc-Silicate phosphors compound was studied by hydrothermal reaction starting from the precursor which prepared by spray pyrolysis method. This process protect including of impuritied from crushing process and Mineralizing in hydrothermal reactions. Using spray pyrolysis precursor, ${\alpha}-Zn_2SiO_4$ powder was prepared by the hydrothermal reaction under $250^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.39 no.5
• /
• pp.452-459
• /
• 2002

This paper addresses the hydrothermal reactivity of blast furnace slag and fly ash with lime, respectively. The test conditions were CaO-to-$SiO_2$ ratio (C/S), autoclaving temperature ($140{\circ}C$ and $180{\circ}C$) and time (20 to 60h). The study was carried out in terms of the hydrothermal reactivity between $SiO_2$ contained in each hydraulic material and (pure) lime and the compressive strength of autoclaved specimens. Porosity measurement and the XRD analysis were also made in order to ascertain the hydraulicity of the siliceous materials. Compressive strength of the specimens was interpreted in terms of porosity and the reactivity of CaO and $SiO_2$. And the XRD analysis showed the C/S change of the hydrates in the course of autoclaving process. $SiO_2$ in the blast furnace slag was more reactive with CaO than that in the fly ash and consequently the blast furnace slag specimens resulted in much higher compressive strength. A maximum compressive strength of $807kg/cm^2$ was obtained for the blast furnace slag at the autoclaving condition of $180{\circ}C$ and 40 h, while only $397kg/cm^2$ was maximally to achieve with fly ash.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2003

Saponite was synthesized from talc by hydrothermal method. The starting material was prepared by adding ($NO_3$)$Al_3$$.$$9H_2$O and Mg($NO_3$)$_2$$.$$6H_2$O solution to the talc powder. which was previously activated in air at 800 $^{\circ}C$ together with $Na_2$$CO_3$. The alkalinity of the solution was controlled by $NH_4$OH solution. The autoclaving was carried out in the closed stainless steel vessel (about 1 liter) for 40 hours under the pressure of 25 kgf/$\textrm{cm}^2$ at $ 230^{\circ}C$ The characterization of the reaction product shows that saponite was crystallized successfully. After the experimental results, pressure was not sensitive parameter in the range of 25 ∼ 75 kgf/$\textrm{cm}^2$, but longer reaction time results in better crystallinity.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1213-1219
• /
• 2003

Porous ceramics for microoganism carriers were prepared with amorphous alumina and pore formers by hydrothermal reaction, burn-out and wash-out method. Activated carbon with average size of 67,222, and 405 $\mu\textrm{m}$, organic polymer and inorganic salt were used as pore formers. Specimens were hydrothermally treated at 200$^{\circ}C$ for 24 h, heat-treated at 650$^{\circ}C$ for 5 h, and washed out at 80$^{\circ}C$ for 48 h. The formation of crystalline phase, porosity, pore size distribution and compressive strength were measured. The specimen with activated carbon was transformed to boehmite phase, but organic polymer and inorganic salt inhibited the aquohydroxoy complex gel and crystalline formation. The porous ceramics for microoganism carriers using activated carbon as a pore formers was successfully prepared, which is composed of ${\gamma}$-alumina phase with porosity of above 70 vol% and the compressive strength of 40 kgf/$\textrm{cm}^2$.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.21-25
• /
• 1997

우수한 세라믹스 제조를 위해서는 작은 입자지름, 좁은 입도분포, 구형의 입자형태, dopant와 matrix가 균일한 고용체를 갖고, 응집입자가 없으며 고순도인 원료 분말의 제조가 선행되어야 한다. 이를 위하여 본 연구에서는 수열 합성법을 이용하여$\alpha$-Al$_2$O$_3$, $\alpha$-SiO$_2$, PZT, PSZT, BTO등의 미세분말을 제조하는 공정에서 반응온도, 광화제의 양과 종류, 반응시간, 출발물질의 양과 종류, 전처리공정, 교반공정 등이 평균입자지름과 결정성 및 입도분포에 미치는 영향을 조사하였다. 그결과 미세분말의 종류에 관계없이 반응온도, 반응시간, 성장기질의 농도, 종자결정의 농도 등이 증가할수록 평균입경은 커지며, 광화제의 농도가 증가할수록 평균 입자지름이 작아지고, 광화제의 농도가 종자결정의 농도가 증가할수록 입도분포가 좁아짐을 알 수 있었다. 특히 $\alpha$-SiO$_2$에 대해 수열합성실험으로부터 평균입자지름과 수열합성의 조업변수간의 특성방정식을 얻었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.254-262
• /
• 1996

$Pb(Zr_{0.52}Ti_{0.48})O_{3}$ (PZT) ceramics were prepared with uniform particle size of $1~3\;\mu\textrm{m}$ by hydrothermal synthesis at various conditions, such as hydrothermal reaction temperature, concentration of mineralizer and reaction time. PZT ceramics were formed above $180^{\circ}C$ for 2 hrs reaction using 10 M KOH solution as a mineralizer, but reaction condition was slightly different by starting materials. Morphology and characterization of PZT powders were investigated by XRD and SEM. By increasing the reaction temperature, KOH concentration and reaction time, the composition of the PZT phase tended to be homogeneous phase.

• 대한치과보철학회:학술대회논문집
• /
• 2004.11a
• /
• pp.50-50
• /
• 2004