• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.47-53
• /
• 2004

For the purpose of comparison between the designed coverage and actual coverage of Korean DGPS (Differential Global Position System) beacon stations, we have received the ship‘s positions with states and IDs of their stations on the navigation route of Jeju-Tianjin by automatic selection mode of DGPS receiver and on them of Jeju-Inchun and Jeju-Vladibostok by manual mode. Also in case that some obstructions were on propagation routes from DGPS beacon stations to receiving positions, a restriction on available ranges of DGPS beacon signals was investigated. The results obtained are as follows : 1. The coverage of Korean DGPS beacon stations was designed 100NM (Nautical mails) at 40.0dB(over ${\mu}$V/m). But the actual coverages of them according to their stations and propagation routes were 0.3-3.6 times as wide as designed coverage. 2. In case that the propagation route of beacon signals from DGPS beacon stations was on the sea, the propagation distance of north direction from the stations was longer than south direction. 3. The coverages of Echongdo and Ulungdo stations were 366NM on the yellow sea and 342.3NM on the east sea of Korea respectively, and were widest than any other stations. 4. The coverage of Marado station on the south and yellow seas of Korea was very unstable because of the Halla mountain on the propagation route. Maximum receiving range to be measured by automatic selection mode of DGPS receiver was 145NM on the route of Jeju-Tianjin on June 22-July 1, 2002. Minimum receiving range to be not measured by manual selection mode was 28.7NM on the route of Jeju-Inchun on June 26-28, 2003

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.146-146
• /
• 2001

목적： 해상도가 우수한 경직장 영상을 위한 소아용 two-turn 표면형 수신 코일, 안장 수신 코일을 제작하여 이를 이용하여 얻은 고양이의 경직장 영상을 비교한다. 대상 및 방법： 지금까지 소아의 경직장 영상은 주로 초음파를 이용하여 얻었으나 해상도가 떨어지며 아직까지 소아용 탐촉자는 개발되지 않았다. 소아의 항문직장 기형의 진단을 위해서는 해상도가 우수한 영상이 필요하고, 이를 위해 소아용 직장 RF 코일로 원주형 two-turn 표면형 코일, 안장 코일을 제작하였다. 크기는 직경 7mm, 길이 6cm와, 직경 10mm, 길이 l0cm 하였고, 코일의 구리선 바깥으로는 두께 1mm의 테프론 tube로 감쌌다. 균일한 시험 시료(phantom)로 마요네즈를 이용하여 T1 강조 영상(Spin echo TR/TE= 500/11 msec, FOV=12cm, 영상행렬 256$\times$256)을 얻어서 신호 강도의 profile을 얻는다. 이를 Mathematica를 이용하여 구한 RF 자기장 세기의 분포와 비교했다. 두 종류의 코일을 각각 사용하여 얻은 고양이 항문 괄약근 영상에서 외부 괄약근, 내부 괄약근 등을 구분, 비교하였다.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.305-312
• /
• 2007

In this paper, we present a received signal strength (RSS) prediction model to timely Initiate link layer triggers for fast handoff in a wireless LAN system. Noting that the distance between a mobile terminal and an access point is not changed abruptly in a short time interval, an adaptive RSS predictor based on a stationary time series model is proposed. RSS data obtained from ns-2 simulations are used to identity the time series model and verify the predictability of the RSS data. The results suggest that an autoregressive process of order 1 (AR(1)) can be used to represent the measured RSSs in a short time interval and predict at least 1-step ahead RSS with a high confidence level.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1166-1172
• /
• 2012

In this paper, by using a commercial EM simulator, we could obtain the array manifold which are phase responses of an array antenna for the incident plane wave and then verified the effectiveness of methodology after comparing with the measurement. The result shows that the array manifold can be calculated including not only the phase response of the ideal point sources but also the influences of the mutual coupling between antennas and the installed platform. Also it can exclude the interference of strong broadcasting signal and the disturbance of the multipath in the calibration process. Finally, to predict the performances of direction finding systems, a novel method using both the EM simulation-based receiving signal and the sparsely sampled array manifold with the parabolic estimation is proposed. This method can be utilized in the various fields of direction-finding since it shows the superior predictive performance even in low SNR conditions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.647-654
• /
• 2016

Indoor localization based on visible-light communication using the received signal strength intensity (RSSI) has been widely studied because of its high accuracy compared with other wireless localization methods. However, because the RSSI can vary according to the inclination and azimuth of the receiver, a large error can occur, even at the same position. In this paper, we propose a visible-light communication-based 3-D indoor positioning algorithm using the Gauss-Newton technique in order to reduce the errors caused by the change in the inclination of the receiver. The proposed system reduces the amount of computations by selecting the initial position of the receiver through the linear least-squares method (LSM), which is applied to the RSSIs, and improves the position accuracy by applying the Gauss-Newton technique to the 3-D nonlinear model that contains the RSSIs acquired by the changes in the azimuth and inclination of the receiver. In order to verify the validity of the proposed algorithm in an indoor space with dimensions of $6{\times}6{\times}3m$ where 16 LED lights are installed, we compare and analyze the errors of the conventional linear LSM-based trilateration technique and the proposed algorithm according to the changes in the inclination and azimuth of the receiver. The experimental results show that the location accuracy of the proposed algorithm is improved by 82.5% compared to the conventional LSM-based trilateration technique.

• Journal of Broadcast Engineering
• /
• v.19 no.4
• /
• pp.439-452
• /
• 2014

This paper suggests the method to extend service area by using the transmit offset delay in T-DMB single frequency network (SFN). In general, synchronization of the transmit time of all site can be done by using the reference clock of GPS, which dose not reflect the details geographical characteristics and transmit specifications of each site. Applying the site-specific transmit offset delay, we could extend the service area of SFN T-DMB. Applying the transmit offset delay, it is found that the signal quality in the region of weak receive field strength was improved and upto 4~8 km service area expansion was achieved by satisfying the minimum field strength ($45dB{\mu}V/m$) recommended by the Korea Communications Commission (KCC). Site-specific offset delay was calculated considering the geographic service area characteristics, distribution of electric field strength between neighboring sites and site-specific service target area. Experiments were carried out in order to analyze impact of calculated offset delay on the T-DMB SFN and also to confirm that the offset delay extends T-DMB service coverage. The experiment was done in metropolitan T-DMB service areas.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.139-140
• /
• 2016

iBeacon의 메시지를 이용하여 단일의 iBeacon 만으로도 정확한 거리를 측정할 수 있는 거리 측정 보정 방안을 제시한다. 이를 위해 iBeacon 메시지를 분석하여 축적된 데이터를 Smoothing을 통해서 오차 범위를 줄이고 거리에 따른 신호강도를 예측할 수 있는 방안을 제시한다. 이를 통해 신호간섭 및 거리 이동에 따른 iBeacon 메시지를 적게 수신하더라도 정확한 위치를 예측할 수 있는 방안을 제시한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.651-654
• /
• 2008

협대역 다중접속 방식의 한계를 벗어난 Ultra-wide band(UWB) 기술이 고속 데이터 전송을 위해 많이 개발되어지고 있다. UWB 시스템은 방사전력 제한을 두고 있어서 근거리 실내 무선통신 분야에서 활용 범위가 확대되고 있다. 하지만 실내 무선 환경에서는 벽, 천장, 바닥 그리고 실내에 위치한 장애물 등에 의한 다중경로 페이딩 영향으로 초고속 실내 무선통신 서비스를 제공하는데 어려움이 있다. 이러한 실내 다중경로 성분에 의한 페이딩을 경감시키는 여러 가지 방법 중에서 원형편파를 이용하면, 상대적으로 긴 지연을 갖는 강한 다중경로 성분을 효과적으로 제거할 수가 있기 때문에 수신신호의 RMS 지연 감소, 페이딩 경감 및 신호강도 개선효과 등을 얻을 수 있다. 본 논문에서는 원형편파를 고려한 수정된 UWB 채널의 파라미터를 수정 정립하였고, 수정된 채널모델을 UWB 시스템에 적용하여 성능 개선을 시도하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1017-1019
• /
• 2015

본 논문에서는 블루투스 비콘을 이용한 스마트팩토리 물류추적시스템에서 복수개의 수신 단말기에서 복수개의 비콘 디바이스의 정확한 위치 인식을 위해 디바이스 모드 제어 방법에 대해 연구하였다. 이를 위해 블루투스 4.0 비콘 IPS 서비스를 활용한 비콘 디바이스 이동 추적, 3축 가속도 센서를 활용한 비콘 디바이스 이동 감지, 비콘 디바이스 이동 감지를 통한 블루투스 모드 제어 실험을 진행하였다. 실험을 통해 비콘 디바이스에 구성된 가속도 센서의 데이터를 활용하여 비콘 신호 전송을 제어할 수 있으며, 신호강도(RSSI) 값을 근거로 비콘 디바이스의 이동 경로와 위치 추적이 가능함을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.287-290
• /
• 2012

GPS 수신이 어려운 실내 환경에서 이동 단말기 사용자나 로봇의 위치를 추정하기 위해 WiFi 신호 강도를 이용하는 연구가 최근 들어 활발히 진행되고 있다. 본 논문에서는 WiFi 신호의 불안정성과 불확실성에 효과적이고 이동 단말기에서 계산 성능을 고려하여 가우시안 프로세서를 변형한 방법을 적용하여, 실내 연속 공간에서 이동 중인 스마트폰 사용자의 실시간 위치를 추정하는 방법을 제안한다. 실험을 통해 제안한 방법의 성능을 분석해보고, 성능 개선을 위한 확장 방안을 제시한다.