• Quality Improvement in Health Care
• /
• v.15 no.2
• /
• pp.65-71
• /
• 2009

문제: 환자가 수술장 내에서 수술을 기다리면서 느끼는 불안감을 최소화할 수 있도록 해야 하지만 수술실의 효율성 및 의료진 편의성 위주로 운영되고 있어 수술실 내 대기시간이 연장되고 있다. 목적: 수술장 내 대기시간을 단축시키기 위해 수술환자의 이동경로에 따른 지연요인과 문제점을 파악하고 개선하여 환자가 수술을 기다리면서 느끼는 불안감을 최소화하고자 한다. 의료기관: 부산시에 소재한 481병상의 종합병원 수술실 질 향상 활동: 수술환자의 대기시간 지연요인과 문제점을 파악하고 개선을 통해 질 향상을 도모하였다. 개선효과: 대기시간 수행율에서 수술장 도착까지의 수행율이 개선전 95%에서 개선후98%로, 수술방 입실까지의 수행율이 개선전 88%에서 개선후 94%로, 마취시작까지의 수행율이 개선전 93%에서 개선후 96%로 수행율이 높아졌다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1797-1798
• /
• 2008

환자의 환부를 최소한으로 절개하여 시술하는 최소 침습 수술 수술은 많은 장점을 가지고 있어 그 활용도가 점차 확대되고 있다. 하지만 조작하는 조직으로부터 눈과 손이 분리되어 있기 때문에 많은 문제점들이 발생한다. 그 중 하나는 수술 영역과 시각 영역이 분리되어 발생하는데, 최적의 위치조정을 위한 자동 복강경 수술 로봇 팔 시스템 도입으로 이러한 문제를 해결하고 있다. 본 연구에서는 복강경 수술 로봇 팔을 설계하는데 있어 동작 범위를 빠르게 시각화하여 설계 단계에서 다양한 파리미터를 적용하여 보다 효율적인 복강경 수술 로봇 팔의 설계 방법을 제시한다. 제안된 물리 엔진을 이용한 동작 범위 분석 방법은 역기구학을 계산할 필요가 없으며, 설계가 바뀌어도 추가로 산출해야 하는 수식 없이 바로 수정된 기구학만으로 동작 범위 분석이 가능하다.

• Journal of radiological science and technology
• /
• v.37 no.3
• /
• pp.203-209
• /
• 2014

Usefulness and clinical availability for surgery efficiency were evaluated by conducting pre-operative planning with a model manufactured by desktop 3D printer by using clavicle CT image. The patient-customized clavicle fracture model was manufactured by desktop 3D printer of FDM wire laminated processing method by converting the CT image into STL file in Open Source DICOM Viewer Osirix. Also, the model of the original shape before damaged was restored and manufactured by Mirror technique based on STL file of not fractured clavicle of the other side by using the symmetry feature of the human body. For the model, the position and size, degree of the fracture was equally printed out. Using the clavicle model directly manufactured with low cost and less time in Department of Radiology is considered to be useful because it can reduce secondary damage during surgery and increase surgery efficiency with Minimal invasive percutaneous plate osteosynthesis(MIPO).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.6
• /
• pp.552-557
• /
• 2004

The air ventilation system of operation rooms has been studied for the prevention of cross infection during the operation. Operation rooms and air ventilation systems of three University hospitals are investigated. The distribution of microbe is measured by cultivating air samples in the operation room. A two-dimensional model for the cross-section of an operation room is developed for the CFD analysis. The characteristics of air flow in operation room are calculated by using a CFD program. The current air ventilation system of an old hospital does not deliver the clean air to the operation area efficiently. A new air ventilation method which improves air venting with little increase of the cost of equipment is suggested.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1991.06a
• /
• pp.36-36
• /
• 1991

기도흡인은 후두의 고유기능중 방어기능을 소실함으로써 지속되는 경우 하기도에 치명적인 손상을 초래하게된다. 기도흡인에 대한 치료는 고식적 치료법과 수술적 치료법으로 대별되는데 일반적으로 고식적으로 치료법이 우선적으로 선택되어지고 있으나 흡인의 정도가 심하여 하기도에 폐렴, 무기폐 등의 위급한 합병증을 유발하거나 그 원인이 비가역적이어서 탈진 또는 악액질을 초래하는 경우 부득이 수술적 요법율 선택하게 된다. 수술적 요법의 선택시기에 대하여는 논란이 많으나 현재까지는 고통을 받고있는 환자의 상태에 따라 결정되고 있는 실정에 있다. 저자들은 최근 5년간 경험한 만성 기도흡인 환자 6례에 대하여 수술적 요법 즉, cricopharyngeal myotomy 1례, cricopharyngeal with medialization laryngoplasty 1례, laryngeal suspension with cricopharyngeal myotomy 2례, laryngeal diversion 1례, total laryngectomy 1례를 각각 시행함으로써 얻은 치료경험을 분석 검토하여 만성 기도흡인에 대한 치료상의 문제점과 보다 효율적인 치료법의 선택에 도움을 얻고자 문헌고찰과 함께 보고하는 바이다.

• Progress in Medical Physics
• /
• v.14 no.4
• /
• pp.225-233
• /
• 2003

The goal of a radiation treatment plan is to deliver a homogeneous dose to a target with minimal irradiation of the adjacent normal tissues. Dose uniformity is especially important for stereotactic radiosurgery using a linear accelerator. The dose uniformity and high dose delivery of a single spherical dose distribution exceed 70％. This also results with a similar stereotactic radiosurgical plan using a Gamma Knife. The dose distribution produced in a stereotactic radiosurgical plan using a Gamma Knife and Linear accelerator is spherical, and the application of the sphere packing arrangement in a real radiosurgical plan requires much time and skill. In this study, we found a characteristic of dose distribution with transformation of beam parameters that must be considered in a radiosurgical plan for effective radiosurgery. First, we assumed a cylinder type tumor model and a cube type tumor model. Secondly, the results of the tumor models were compared and analyzed with dose profiles and DVH_(Dose Volume Histogram) representative dose distribution. We found the optimal composition of beam parameters_(i.e. collimator size, number of isocenter, gap of isocenters etc.), which allowed the tumor models to be involved in the isodose curve at a high level. In conclusion, the characteristics found in this study are helpful for improving the effectiveness and speed of a radiosurgical plan for stereotactic radiosurgery.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.238-249
• /
• 2005

The contemporary two-jaw surgical approach usually involves a Le Fort osteotomy of the maxilla and a ramal osteotomy of the mandible with 3-dimensional repositioning of the jaws as well as the occlusal planes. After making the surgical treatment plan. the surgical movements are duplicated in the model surgery. During this procedure, reference poings and lines are drawn on the base of the models over the dental arch and sawcuts are mads according to these marked osteotomy lines. This technique, however, has been found to be inexact. especially when the laws are moved in several dimensions simultaneously. To overcome this. different methods have been developed for an accurate repositioning of the jaws as planned. A new appliance. Surgical Jaw Relater, has been devised by th8 author for the simple 3-dimensional relocation of the upper and lower models, resulting in the easy construction of the splints such as centric relation splint, intermediate and final splint. This article describes an introduction and a clinical application of this appliance. Through the application of this system to the orthognathic cases including two-law surgery. it is proved that the row device is very clinically useful.

• Korean Journal of Poultry Science
• /
• v.29 no.4
• /
• pp.249-253
• /
• 2002

A 2 ${\times}$ 2 factorial experiment was conducted to determine the effect of cecectomy and urea supplementation on nitrogen utilization In growing chicks. Birds were either cecectomized or shamoperated and fed a 19% protein diet with or without 1% urea supplementation. All chicks were provided ad libitum access to feed and water throughout the six-day experimental period. In the cecectomized chicks, fred efficiency was significantly decreased when fed a 19% protein diet supplemented with 1% urea (P<0.05). When chicks were fed a 19% protein diet, cecectomy significantly shortened gastrointestinal passage time (GPT) of food (P<0.05). However, the GPT was significantly lengthened in chicks fed a 19% protein diet supplemented with urea (P<0.05). Regardless of diets, cecectomized chicks increased the moisture contents of the excreta (P<0.05) and feeding a 1% dietary urea also significantly increased (P<0.05). Cecectomy significantly decreased uric acid N excretion by about 30 mg per 100 g body weight per day (P<0.05) and uric acid N/ total N excretion when fed both diets (P<0.05). The present study suggests that cecectomy improves nitrogen utilization rate by decreasing uric acid excretion in growing chicks. These results are in good agreement with those obtained previously in a cecectomy study of adult chickens.

• Journal of the Korean hospital association
• /
• v.17 no.6 s.155
• /
• pp.8-11
• /
• 1988

• Journal of the Korean hospital association
• /
• v.21 no.5 s.194
• /
• pp.27-41
• /
• 1992