• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.18-33
• /
• 1995

천연가스는 지구상에서 비교적 광범위하게 생산되며 구미 등에서는 대부분 pipe line으로 소비지까지 운송하여 사용하고 있지만 일본 등에서는 액화 천연가스 (LNG)로 저장, 수송하여 사용하고 있다. LNG 저장탱크는 생산측의 액화기지와 사용측 의 수입기지에 설치되며 지금까지 약 240기가 건설되어 있다. 종래 탱크 1기의 용량 은 대부분 6 - 8만m$^{3}$ 규모였지만, 토지의 유효이용 등으로 대형화되고 있으며, 또 지상식에서는 PC(Prestressed Concrete)의 방파제를 외부탱크에 근접시켜 외부탱크 와 일체화시킨 PC LNG 탱크가 개발.설계되었다. 일본에서는 이미 이 방식으로 세계 최대규모인 14만m$^{3}$ 탱크가 건조되어 가동 중이다. LNG의 주성분은 메탄이고 비등점은 -161.5.deg.C로 극저온이다. 이러한 저온에서도 취화되지 않고 사용할 수 있는 재료는 9%Ni강, Al 합금, 스테인레스강 및 Invar 등이 있지만, 탱크의 대형화에 따라 가공성, 용접성 및 경제성을 고려하여 요즈음은 9%Ni강이 주로 사용되고 있다. 한편 9%Ni강용 용접재료는 고Ni계 합금 및 모재와 동일한 성분계의 공금계가 있지만 지금까지 고 Ni계 합급이 주로 사용되고 있다. 본 내용에서는 9%Ni강을 사용한 지상식 평지원통형 LNG 탱크를 예로 들어 탱크의 개요 및 용접재료, 용접시공 등을 포함한 용접기술에 대해서 개괄적으로 설명하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.8
• /
• pp.596-603
• /
• 2009

The performance of proton exchange membrane fuel cell (PEMFC) is seriously changed by the humidification condition which is intrinsic characteristics of the PEMFC. Typically, the humidification of fuel cell is carried out with internal or external humidifier. A membrane humidifier is applied to the external humidification of residential power generation fuel cell due to its convenience and high performance. In this study, a simple static model is constructed to understand the physical phenomena of the membrane humidifier in terms of geometric parameters and operating parameters. The model utilizes the concept of shell and tube heat exchanger but the model is also able to estimate the mass transport through the membrane. Model is constructed with FORTRAN under Matlab/$Simulink^{(R)}$ $\Box$environment to keep consistency with other components model which we already developed. Results shows that the humidity of wet gas and membrane thickness are critical parameters to improve the performance of the humidifier.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.71-82
• /
• 2003

The shortest path problems(SPP) are critical issues in the military logistics such as the simulation of the War-Game. However, the existing SPP has two major drawbacks, one is its accuracy of solution and the other is for only one solution with focused on just link cost in the military transportation planning models. In addition, very few previous studies have been examined for the multi-shortest path problems without considering link capacity reflecting the military characteristics. In order to overcome these drawbacks, it is necessary to apply the multi-shortest paths algorithm reflecting un-expected military incidents. This study examines the multi-shortest paths in the real networks using Shier algorithm. The network contains both military link capacity and time-based cost. Also, the modes are defined as a platoon(group) rather than unit which is used in most of previous studies in the military logistics. To verify the algorithm applied in this study. the comparative analysis was performed with various sizes and routes of network which compares with Dijkstra algorithm. The major findings of this study are as follows ; 1) Regarding the unique characteristics of the military transportation plan, Shier algorithm, which is applied to this study, is more realistic than Dijkstra algorithm. Also, the time based concept is more applicable than the distance based model in the military logistics. 2) Based on the results from the various simulations of this study the capacity-constraint sections appeared in each scenarios. As a consequence, the alternatives are necessary such as measures for vulnerable area, improvement of vehicle(mode), and reflection of separated-marching column in the military manuals. Finally. the limits and future research directions are discussed : 1) It is very hard to compare the results found in this study. which is used in the real network and the previous studies which is used in arbitrary network. 2) In order to reflect the real military situations such as heavy tanks and heavy equipment vehicles. the other constraints such as the safety load of bridges and/or the height of tunnels should be considered for the future studies.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.85-98
• /
• 2010

As transit networks are becoming more multimodal, the concept of connectivity of transit networks becomes important. This study aims to develop a quantitative model for measuring the connectivity of multimodal transit networks. To that end, we select, as evaluation measures of a transit line, its length, capacity, and speed. We then define the connecting power of a transit line as the product of those measures. The degree centrality of a node, which is a widely used centrality measure in social network analysis, is employed with appropriate modifications suited for transit networks. Using the degree centrality of a transit stop and the connecting powers of transit lines serving the transit stop, we develop an index quantifying the level of connectivity of the transit stop. From the connectivity indexes of transit stops, we derive the connectivity index of a transit line as well as an area of a multimodal transit network. In addition, we present a method to evaluate the connectivity of a transfer center using the connectivity indexes of transit stops and passenger acceptance rate functions. A case study shows that the connectivity evaluation model developed in this study takes well into consideration characteristics of multimodal transit networks, adequately measures the connectivity of transit stops, lines, and areas, and furthermore can be used in determining the level of service of transfer centers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.1-7
• /
• 2018

Tin dioxide, $SnO_2$, is applied as an anode material in Li-ion batteries and a gas sensing materials, which shows changes in resistance in the presence of gas molecules, such as $H_2$, NO, $NO_2$ etc. Considerable research has been done on the synthesis of $SnO_2$ nanostructures. Nanomaterials exhibit a high surface to volume ratio, which means it has an advantage in sensing gas molecules and improving the specific capacity of Li-ion batteries. In this study, $SnO_2$ nanostructures were grown on a Si substrate using a thermal CVD process with the vapor transport method. The carrier gas was mixed with high purity Ar gas and oxygen gas. The crystalline phase of the as-grown tin oxide nanostructures was affected by the oxygen gas flow rate. The crystallographic property of the as-grown tin oxide nanostructures were investigated by Raman spectroscopy and XRD. The morphology of the as-grown tin oxide nanostructures was confirmed by scanning electron microscopy. As a result, the $SnO_2$ nanostructures were grown directly on Si wafers with moderate thickness and a nanodot surface morphology for a carrier gas mixture ratio of Ar gas 1000 SCCM : $O_2$ gas 10 SCCM.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.511-520
• /
• 2016

It is essential to connect the railroads between South and North Korea in order to the implementation of the Eurasia initiatives and prepare for the normalization of the economic cooperation between south and north Korea as well as the unification. This study provides the strategy to establish the rail logistics network for the normalized trades between south and north Korea, and the accommodation of the logistics demands to China and Russia. The alternative routes were designated and the costs for the rehabilitation were estimated, and suggested the priority for the investment. The Trans-China Rail is prior to the Trans-Siberia Rail in terms of the utility for the logistics and the political value. In connection to the TSR, it is desirable to pass the Seoul-Gyeonggi area where the demand is greater than the other area. This route is limited by the restriction in the capacity, then the Gyeonggi Ring Rail route may be necessary.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.247-254
• /
• 2007

Heterogeneous anion exchange membranes were prepared by compression molding for the recovery of sulfate ion from waste water. The swelling ratio, transport number, and ion exchange capacity of the heterogeneous anion exchange membranes were increased and their electrical resistances were decreased as the amount of ion exchange resin content in the matrix was raised. The tensile strength of the heterogeneous anion exchange membrane was decreased with increasing the amount of ion exchange resin in the LLDPE. The tensile strength for the LDPE heterogeneous membrane containing 30 wt% anion exchange resin showed the highest value. The water content increased with increasing amount of ion exchange resin in the membrane. Moreover the highest transport number of the membrane was 0.86. The electrical resistance of LDPE matrix membrane with 50 wt% resin showed $46.5{\Omega}{\cdot}cm^2$. Current efficiency of electrodialysis for sulfate ion showed the highest value at the current density of $125 mA/cm^2$ in 0.5 mol/L sulfuric acids solution.

• Management & Information Systems Review
• /
• v.32 no.3
• /
• pp.107-125
• /
• 2013

This study deals with a strategic decision making in two level supply chain network design. This study presents more realistic mathematical model than the previous studies by considering simultaneous location of plants and distribution centers, determination of capacity level for both plants and distribution centers, and upper limit condition for numbers of locating plants and distribution centers. This paper tries to help the strategic decision making for two level supply chain network design. For this purpose, three different sized numerical examples are generated and optimal solutions are obtained by applying Excel Solver program. And sensitivity analysis is performed for the biggest sized example problem, which has 10 potential plants, 20 potential distribution centers, and 200 customer zones. After the plants being located are fixed, optimal minimum costs are obtained and compared for each of 7 different numbers of distribution centers to be located. As the number of distribution centers increases, changes in inbound transportation cost and outbound transportation cost can be derived. In case of considering cost as well as customer satisfaction level for two level supply chain network design, the analysis of this changes may help more sophisticated decision making.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.283-291
• /
• 2010

In this review, the studies on the electrochemical properties of $TiO_2$ nanotube as an anode material of lithium-ion battery, which was prepared by an alkaline hydrothermal reaction and anneling process, were investigated andanalyzed in terms of charge-dischage characteristics. Up to date, a maximum discharge capacity of $338mAh\;g^{-1}$(x=1.01) was achieved by the nanotube with $TiO_2(B)$ phase, whereas the theoretical capacity of $TiO_2$ anode was $335mAh\;g^{-1}$(x=1) in the basis of $Li_xTiO_2$ as a product of electrochemical reaction between $TiO_2$ and lithium. This was due to fast lithium transport by a shortened diffusion path provided by controlling the nanostructure of $TiO_2$, because the self-diffusion of lithium was slow in a basis of its activation energy as 0.48 eV. Due to an excellent ion storage capabilities in both the surface and the bulk phase, the $TiO_2$ nanotube could be a promising active material as both an anode of lithium-ion battery and an electrode of capacitor with high-rate performances.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.595-606
• /
• 2022

Korea has the characteristics of traditional power system such as large-scale power generation and large-scale power transmission systems, including 20 GW large-scale power generation complexes in several regions with unit generator capacity exceeding 1.4 GW, 2-3 ultra-high-voltage transmission lines that transport power from large-scale power generation complexes, and 6 ultra-high-voltage transmission lines that transport power from non-metropolitan areas to the metropolitan area. Due to the characteristics of the power system, the penetration level for renewable energy is low, but due to frequency stability issue, some generators are reducing the output of generators. In the future, the issue of maintaining the stability of the power system is expected to emerge as the most important issue in accordance with the policy of expanding renewable energy. When non-inertial inverter-based renewable energy, such as solar and wind power, surges rapidly, the means to improve the power system stability in an independent system is to install a natural inertial resource synchronous condenser (SC) and a virtual inertial resource BESS in the system. In this study, we analyzed the effect of renewable energy on power system stability and the BESS effect to maintain the minimum frequency through a power system simulation. It was confirmed that the BESS effect according to the power generation constraint capacity reached a maximum of 122.81 %.