• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.249.2-249.2
• /
• 2010

최근의 고유가와 환경오염에 대한 대응 수단으로 수송용 바이오연료의 보급에 대한 관심이 세계적으로 높아지고 있다. 이 중 바이오디젤은 동식물성 기름으로부터 메탄올과의 전이에스테르화 반응에 의해 생산되는 경유대체 연료로서 환경 친화성과 지속가능성이 인정됨에 따라 그 생산량이 급격히 증가하고 있다. 바이오디젤의 생산량이 증가함에 따라 대두유, 유채유, 팜유 등의 원료유 가격 상승 및 수급 불안정 문제가 대두되고 있으며 식량자원과의 충돌 문제도 발생되고 있다. 이를 해결하기 위한 방안으로 유리지방산 함량이 높은 저가유지 자원(폐식용유, 폐돈지, 폐우지, soapstock, trapped grease)을 이용한 공정 개발 연구가 활발히 진행되고 있다. 본 연구에서는 비활용되고 있는 해외 열대작물 열매씨앗에서 착유한 식물성 오일의 바이오디젤 원료유로서의 사용 가능성을 검토하였다. 열대작물 오일의 물성 분석 결과 고형물, 수분, 인, 유리지방산 함량이 대두원유보다 매우 높게 나타났다. 오일 중의 인지질은 바이오디젤 제조 반응후 에스테르와 글리세린의 층분리를 방해하여 공정 효율을 감소시키고 유리지방산은 염기촉매와 결합하여 지방산염을 생성해 생산수율을 감소시키는 문제를 일으킨다. 고형물과 수분은 여과와 감압증발에 의해 쉽게 제거가 가능하였다. 15~20%의 유리지방산 함유 열대작물 오일의 전처리를 위해 균질계 산촉매와 비균질 고체 산촉매를 이용해 에스테르화 반응 효율을 조사한 결과 황산이 가장 높은 효율을 보였다. 반응표면분석법(Response Surface Method, RSM)을 적용해 메탄올과 촉매량의 2변수 에스테르화반응 최적화를 수행한 결과 메탄올 26%, 촉매 0.98%로 최적 조건이 도출되었으며 초기 산가 33mgKOH/g에서 0.98mgKOH/g으로 감소됨을 확인하였다. 전처리 정제한 오일의 물성분석 결과 고형물 0.1%, 수분 0.10%, 산가 1.0mgKOH/g, 인함량 20ppm 이하로 바람직한 원료유가 생산됨을 알 수 있었다. 제조된 원료유를 이용해 전이에스테르화 반응 최적화 실험을 RSM에 근거하여 진행한 결과 KOH 0.8%, 메탄올:오일 몰비 6.2:1, 반응온도 $60^{\circ}C$, 교반속도 200rpm, 반응시간 30분으로 나타났으며 증류 정제전 97.3%, 증류후 100.0%의 바이오디젤을 생산 할 수 있었다. 열대작물 오일의 전처리 공정은 메탄올을 과잉양으로 사용함으로 효과적인 알콜 회수 공정이 중요하다. 전처리 후 층분리를 통해 회수되는 메탄올 중의 수분함량은 2%~7%로서 이를 전처리 반응에 재사용하기 위해서는 0.3%이하의 수분함량으로 정제가 필요하다. 본 연구에서는 고가의 증류탑 형태가 아닌 단증류방식으로 2단계 내지 3단계로 0.3% 수분의 메탄올 회수 조건을 도출하였으며 파일롯 공정 설계를 진행하고 있다. 이로서 본 연구의 열대작물 오일은 저가로 충분한 물량의 확보가 가능하다면 바이오디젤 원료 자원으로서 큰 활용가치가 있는 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.367-371
• /
• 2011

TBAB (tetra-n-butyl ammonium bromide) forms a semi-clathrate with water under atmospheric pressure conditions and recently has attracted great attention due to its usage as a thermodynamic promoter in gas storage and separation process using gas hydrate formation. In this study, we measured the three-phase (hydrate (H) - liquid water ($L_{w}$)-vapor (V)) equilibria of the ternary $CH_{4}$+TBAB+water and $CO_{2}$+TBAB+water mixtures at the TBAB concentrations of 5 and 32 wt% to investigate promoting characteristics of TBAB. The greater promotion effect of TBAB was observed at 32 wt% than at 5 wt%. This result was in good agreement with that from pure TBAB semi-clathrate phase diagram under atmospheric pressure conditions. Through $^{13}C$ NMR analysis of the $CH_{4}$+TBAB semi-clathrate, it was found that $CH_{4}$ molecules are enclathrated in the cages of the double semi-clathrate and the position of resonance peak from encaged $CH_{4}$ molocules in the double semi-clathrate is the same as that from encaged $CH_{4}$ molocules in the pure $CH_{4}$ hydrate of structure I.

• Journal of the Korean earth science society
• /
• v.25 no.6
• /
• pp.474-483
• /
• 2004

This paper analyzed the characteristics of daily ozone variations over Kangreung and Wonju. It was found that the diurnal cycle of ozone over Wonju has a primary ozone peak in the afternoon and a minimum around sunrise, which is a typical diurnal ozone cycle observable in the urban area. However, the cycle over Kangreung shows a primary peak in the afternoon and secondary peak around 3 a.m. The amounts of ozone in the secondary peak is occasionally higher than that in the primary peak. This nocturnal ozone peak is frequently observed year-round, and the highest frequency and extent are observed in spring. The possible cause of this nocturnal ozone increase was investigated using meteorological parameters and the HYSPLIT trajectory model. It was found that the nocturnal ozone peak is highly correlated with strong wind speed, which has led to positive temperature anomaly. The trajectory model revealed that when the secondary peak occurred, the air was originated from the west and a sinking motion subsequently followed. These findings suggested that when the westerly wind is strongest in spring, the polluted airs from urban areas are transported to the upper boundary layer over Kangreung area. In the case of strong wind during the night, nocturnal ozone peaks were produced by active vertical mixing between lower boundary and upper boundary layers.

• Journal of the Korean Institute of Gas
• /
• v.19 no.3
• /
• pp.9-17
• /
• 2015

Almost all of the natural gas consumed in South Korea is compressed into very high pressure for the transportation through the underground pipelines, then reduced in pressure regulation stations before delivery to the consumer. For pressure reduction, expansion valves have been used due to the simple and effective installation, but recover none of the energy in the gas during compression. Hence, turbo-expanders are proposed instead of the valves to accomplish the same pressure letdown function and recover some of the compression energy in the form of shaft work converting into electric powers. Here we have theoretically calculated the electric powers at the pressure reduction from 68.7 bar to 23 bar (which are the average values taken at the inlet and outlet points of the expansion valve in medium-pressure regulation stations) according to the inlet conditions of temperature and flow rate. The natural gas is considered as two cases of a pure methane and the mixture of hydrocarbons with a very small amount of nitrogen, and the Peng-Robinson equation of state is employed for the calculation of required thermodynamic properties. The electric energy is recovered as much as 1596 MW(methane) and 1567 MW(mixture) based on the total supply of natural gas in 2013.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.473-480
• /
• 2011

The proton exchange membrane (PEM) fuel cell system is critically dependent on the humidity, which should be properly maintained over the entire operating range. A membrane humidifier is used for the water management in the PEMFC because of the membrane humidifier's reliable performance and zero parasitic power loss. In the PEMFC system, the membrane humidifier is required to provide appropriate humidity for the design point of the fuel cell. Although the performance of the fuel cell depends on the performance of the humidifier, few studies have provided a systematic analysis of the humidifier. We carry out an experimental analysis of the membrane humidifier using a vapor condensation bottle. The dry air pressure, water flow temperature, and air flow rate were chosen as the operating parameters. The results show that the time constant for the dynamic response of the membrane humidifier is relatively short, but additional analysis should be carried out.

• Journal of Sericultural and Entomological Science
• /
• v.53 no.1
• /
• pp.50-54
• /
• 2015

Mulberry fruit is common to keep a frozen storage because of the very high water content. Because freezing-storing cost is generated before the processing or sales, farmers of mulberry fruit production are weighted in financial burden. In addition, mulberry fruit has difficulty in expanding consumption by made in the simple processed products like the mulberry jam, mulberry juice, mulberry enzyme, alcohol, etc. Recent, frozen fruits including frozen blueberries, frozen strawberries, frozen mango, frozen rich, frozen mulberry fruit has been started to sell in the large discount stores and convenience stores. However, there is restricted sales in only special place that have the frozen distribution facilities. So, for the income improvement and consumption promotion of mulberry farmers facing these difficult situations, we developed the processing method of semi-dried mulberry fruit using the vacuum freezing dryer. The frozen mulberry fruit which was stored below $-40^{\circ}C$ is to dry in a vacuum freeze dryer, at $30{\sim}35^{\circ}C$, 23 ~ 24 hours. Semi-dried mulberry fruit seperated respectively. It had soft texture, and maintained shape, size and flavor. In particular, semi-dried mulberry fruit can be stored at room temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.865-875
• /
• 2018

Selection of optimum reaction conditions during deoxygenation process of palm oil is essential factor to obtain the maximum yield of bio-jet fuel. In this context, the deoxygenation of palm oil was carried out in a fixed bed reactor with an internal diameter of 1 inch loaded with a 1 wt.% $Pt/Al_2O_3$ catalyst. The composition of the organic liquid product(OLP), which can be utilized as a transportation fuel through the upgrading process, was analyzed by a gas chromatography method. The palm oil/hydrogen ratio and hydrogen pressure in the feed affected the decarboxylation(DCB) and hydrodeoxygenation(HDO) reactions, resulting in a change in the composition of the OLP. As the reaction temperature increased, the continuous cracking reaction of the deoxygenation product was promoted and the product composition in the $C_5{\sim}C_{14}$ region was increased. Thus, the results can help to understand the characteristics of deoxidation reaction of palm oil as well as the subsequent process, hydro-upgrading, to obtain the maximum yield of bio-jet fuel.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.11-14
• /
• 2012

The AlGaN layer has direct wide bandgaps ranging from 3.4 to 6.2 eV. Nowadays, it is becoming more important to fabricate optical devices in an UV region for the many applications. The high quality AlGaN layer is necessary to establish the UV optical devices. However, the growth of AlGaN layer on GaN layer is difficult due to the lattice mismatch and difference thermal expansion coefficient between GaN layer and AlGaN layer. In this paper, we attempted to grow the LED structure on GaN template by mixed-source HVPE method with multi-sliding boat system. We tried to find the optical and lattice transition of active layer by control the Al content in mixed-source. For the growth of epi layer, the HCl and $NH_3$ gas were flowed over the mixed-source and the carrier gas was $N_2$. The temperature of source zone and growth zone was stabled at 900 and $1090^{\circ}C$, respectively. After the growth, we performed the x-ray diffraction (XRD) and electro luminescence (EL) measurement.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.90-95
• /
• 1993

수력, 화력, 원자력 다음으로 제 4의 전원으로서 관심의 대상이 되고 있는 연료전지는 연료가 가지고있는 화학에너지를 직접에너지로 변환시키는 점에서 종래의 발전 기술과는 원리적으로 다르며, 카르노(Carnot)사이클에 의한 에너지 변환 효율의 제한을 받지 않기 때문에 효율이 높으며 공해가 없는 특징을 가지고 있다. 연료전지의 발전 방식은 작동 온도, 전해질 등에 의해서 분류되나 현재 실용화단계의 기술은 인산형연료전지 발전이다. 인산형 연료전지의 발전용 연료는 천연가스, 메탄올, 납사 등과 같은 탄화수소 계열의 다양한 연료를 사용할 수 있으며, 이들 연료들을 수소가 많이 함유된 가스로 변환시켜 연료전지에 공급하여야 한다. 연료전지발전시스템 개발은 주로 전력이용 측면에서 천연가스를 개질연료로 사용하는 연구가 주류를 이루었으나, 최근에는 전 세계적으로 대기 공해에 시달리고 있는 도시의 환경개선을 위하여 도심용 버스 및 대형 트럭 등에 응용하기 위한 무공해 수송용 자동차엔진의 개발, 국방용 이동전원 개발 및 100㎾ 미만의 현지설치용 및 낙도용 전원으로서 메탄올을 연료로 한 연료전지의 개발이 활발히 진행되고 있다. 한국에너지기술연구소는 한국전력 기술연구원과 공동으로 1989년부터 1992년까지 본체를 제외한 5.9㎾급 인산형 연료전지 발전시스템 즉, 메탄올 연료 개질장치, 운전자동화 시스템, 배열이용 시스템, 종합 배관 등을 설계 구성하여 발전 플랜트의 운전 특성 연구를 수행하였으며, 본 고에서는 이들 설비들의 운전 특성과 발전 플랜트로서의 효율 특성에 대한 고찰을 수행하였다. 본 시스템은 연료개질기가 연결되고 배열을 이용하는 국내최초의 종합적인 연료전지 발전 시스템으로서 개질된 연료로 운전하였을 경우 본체의 효율은 31.9%, 배열을 회수한 종합발전 플랜트의 효율은 45.2%였다.로서, 흰쥐 유선이 LH의 생성처이면서 동시에 작용처이며 유선에서 합성된 GnRH의 조절하에 국부적인 인자로 작용할 가능성을 시사한다.f variation)가 10% 내외로 만족할 만한 범위에 들었다. 본 실험 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Jap

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.202-209
• /
• 2005

This study concerns the performance of boiling heat transfer in inclined thermosyphons with internal grooves. A study was carried out with the performance of the heat transfer of the inclined thermosyphon having 60 internal grooves in which boiling and condensation occur. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphon is also tested for comparison. Distilled water, methanol and ethanol have been used as the working fluid. The inclination angle, three working fluids, heat flux and the boiling heat transfer coefficient at the evaporator zone are estimated from the experimental results. The experimental results have been assessed and compared with existing correlations. Imura's and Kusuda's correlation for boiling showed in good agreement with experimental results within ${\pm}20%$ in plain thermosyphon. The high heat transfer coefficient was found between $25^{\circ}$ and $30^{\circ}$ of inclination angle for water and between $20^{\circ}$ and $25^{\circ}$ for methanol and ethanol. The relatively high rates of heat transfer have been achieved in the thermosyphon with internal micro grooves.