• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.409-413
• /
• 2006

An experimental study on a combined $De-NO_x$ process of non-thermal plasma and $NH_{3}$ SCR, which can be operated under low temperature conditions, i.e. $150{\sim}200^{\circ}C$, has been conducted. The test results confirmed feasibility of fast SCR reaction, which shows faster reactivity compared with typical SCR reaction under the low temperature conditions. The test showed that pre-oxidation step to convert NO to $NO_2$ is necessary for the fast SCR reaction, and the appropriate ratio of $NO_{2}/NO_{x}$ ranges from 0.3 to 0.5. Ammonium salts produced under low temperature conditions, effects of hydrocarbons on the combined process, the operation power of the process are discussed in the present study.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.42.1-42.1
• /
• 2011

박막형 디스플레이구서에 있어서 투명전극은 필수적이다. 투명전극은 정보를 표시하기 위해 빛을 외부로 방출시키거나 태양광 등을 소자 내부로 입사시켜야 한다. 또한 전극을 형성하는 박막은 높은 광투과율과 ${\sim}10-4{\Omega}cm$ 정도의 낮은 전기비저항을 가져야 한다. 가장 널리 사용되는 투명전극으로 ITO (Indium Tin Oxide)는 인듐의 독성, 저온증착의 어려움, 스퍼터링시 음이온 충격에 의한 막 손상으로 저항의 증가 및 액정디스플레이의 투명전극으로 사용될 경우 $400^{\circ}C$정도의 높은 온도와 수소플라즈마 분위기에서 장시간 노출시 열화로 인한 광학적 특성변화가 문제로 지적된다. 이러한 문제 해결의 대안으로 ZnO 산화물 반도체가 있는데 ITO 박막에 비해 비저항이 높기 때문에 도핑을 이용한 비저항을 ${\sim}10-4{\Omega}cm$ 정도로 낮추어야 한다. 투명전도막으로는 ITO, FTO 등과 더블어 체적 저항율은 다소 높으나 환원성 분위기에 대한 내성, 가시광 영역에서의 높은 광투과율과 저렴한 가격 등의 장점 등으로 AZO 박막이 주목 받고 있다. ZnO는 ITO 나 FTO에 비해서 700 kJ/mol의 큰 분해에너지를 가지므로 코팅 때 발생하는 전도도 및 투과율이 나빠지는 현상이 발생하지 않는 특징이 있으며, 위의 두 재료에 비해 밴드갭도 가장 낮아서 자외선 투과율이 낮다. 그러나 내습성이 약하기 때문에 이를 보완하기 위하여 내습성향상과 전도성 향상을 위해서 3족 원소인 B, In, Al, Ga 등을 도핑한 ZnO 투명전도막의 연구가 진행되고 있다. 이러한 원소들 중에서 Al로 도핑했을 때 가장 낮은 비저항을 얻을 수 있다고 알려져 있다. 본 연구에서는 SiOC 박막위에 AZO 박막을 제조하기 위하여 RF 마그네트론 스퍼터링법을 이용하여 박막을 성장시켰으며, 박막의 전기적 및 광학적 특성을 조사하였다. AZO 박막은 rf power가 5~200 W인 RF 마그네트론 스퍼터 방법에 의해서 제작되었다. SiOC 박막은 산소와 DMDMOS 전구체의 유량비를 다르게 하여 플라즈마 발생 화학적 기상 증착방법으로 증착되었다. 증착된 SiOC박막은 UV visible spectroscopy에 의해서 분석하였다. 투명전극의 비저항은 rf 전력이 작을 수록 낮았으며, SiOC 절연막 위에 AZO를 증착시킨 후 반사률은 반대로 바뀌는 것을 확인하였다.

• The Korean Journal of Petroleum Geology
• /
• v.13 no.1
• /
• pp.24-29
• /
• 2007

The main purpose of this study is to identify the shallow gas origin in the KSSM zone. Based on the results of gas composition and isotope in the headsapace gas, the shallow gas is mainly composed of methane and carbon and deuterium isotopes (${\delta}^{13}CCH_4$ and ${\delta}DCH_4$) of methane has ranged from -93.4%o to -70.9%, and from -228%o to -199%o in each. These results imply that shallow gas has predominately biogenic source by $CO_2$ reduction rather than thermogenic. The carbon isotopic separation (${\varepsilon}_c$) between methane and carbon dioxide $(CO_2)$ has a range of 54.4 to 72.2, it also supports biogenic origin of shallow gas.

• Journal of Powder Materials
• /
• v.19 no.6
• /
• pp.446-450
• /
• 2012

In order to fabricate the porous Mo with controlled pore characteristics, unique processing by using $MoO_3$ powder as the source and camphene as the sublimable material is introduced. Camphene-based 15 vol% $MoO_3$ slurries, prepared by milling at $50^{\circ}C$ with a small amount of dispersant, were frozen at $-25^{\circ}C$. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $750^{\circ}C$, and sintered at $1000-1100^{\circ}C$ for 1 h. After heat treatment in hydrogen atmosphere, $MoO_3$ powders were completely converted to metallic W without any reaction phases. The sintered samples showed large pores with the size of about $150{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal wall of large pores and near bottom part of specimen had relatively small pores due to the difference in the camphene growth rate during freezing process. The size of small pores was decreased with increase in sintering temperature, while that of large pores was unchanged. The results are strongly suggested that the porous metal with required pore characteristics can be successfully fabricated by freeze-drying process using metal oxide powders.

• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.60-64
• /
• 1988

Synthesis and biological activity test are described for the (Z)-11-hexadecen-1-ol, (Z)-11-hexadecen-1-yl acetate, and (Z)-11-hexadecen-l-al, the sex pheromone of the diamond back moth, Plutella xylostella L.. Lithium acetylide was alkylated with 10-bromodecan-1-ol THP ether to give 11-hexadecyn-l-ol THP ether. 11-Hexadecyn-l-ol THP ether was stereoselectively reduced over Pd/BaSO4to yield (Z)-11-hexadecen-l-ol THP ether, which was in turn deprotected to provide (Z)-11-hexadecen-l-ol. (Z)-11-Hexadecen-l-ol was acetylated and oxidized to afford (Z)-11-hexadecen-1-yl acetate and (Z)-11-hexadecen-l-al, respectively. Biological activity test of the synthetic compounds, (Z)-11-hexadecen-l-ol, (Z)-11-hexadecen-1-yl acetate, and (Z)-11-hexadecen-l-al in the ratio of 0.1 : 5 : 5 was tested in the field using polyethylene capsules as containers. The numbers of moth trapped with pheromone vials were counted.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.685-693
• /
• 1997

We have studied the reforming of carbon dioxide with methane over various supported nickel catalysts. The nickel supported on natural zeolite showed the highest activity and the nickel on acidic support showed higher activity and slow deactivation compared to nickel on basic support. The activity of nickel on natural zeolite increased with increasing loading ratio and showed almost constant activity above 10wt.% loading of nickel. The conversion and yield of products were affected by the mole ratio of reactants and the highest yields of CO and $H_2$ were obtained at $CH_4/CO_2=1$. The deactivation of catalyst was caused by deposition of coke which was formed by the decomposition of methane. The shape of coke was shown to be whisker tripe carbon, and it brought out the slow deactivation of catalyst.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.6
• /
• pp.262-266
• /
• 2010

The Calcium-aluminate electride thin films on the quartz substrates was coated by sol-gel process. The crystallization of the C12A7 thin film was observed at $800^{\circ}C$ and high density C12A7 thin film was achieved on heat treatment at $1,200^{\circ}C$ for 1 hour. The reduction heat treatment of C12A7 thin film could be converted from insulator to conductor and the electrical conductivity was 120 S/cm in the C12A7 thin film heat treated at $1,200^{\circ}C$ with $H_2$ gas for 48 hours.

• Journal of ILASS-Korea
• /
• v.20 no.3
• /
• pp.149-155
• /
• 2015

With increasing of GDP, the registration number of passenger cars has exceeded 20 million last year in Korea. Especially, the registration number of the diesel engine vehicles has been increasing. However, the WHO(World Health Organization) IARC (International Agency for Research on Cancer) has reported that diesel engine exhaust gas is an one of HAPs, which has carcinogenic for human, and they have designated it to Group 1. To solve this problem, exhaust gas from diesel engines has to be controlled. Thus, it has been controlling by European regulatory standard in Korea. On the other hand, in order to meet the enhanced emission regulations, all manufacturing company applied $NO_x$ control device to vehicles such as EGR (Exhaust Gas Recirculation), SCR (Selective Catalytic Reduction) and so on. However, these devices (EGR, SCR) were operated by difference reaction mechanism respectively, and the composition of exhaust gas would be differenced from that of them. In this study, it was conducted to evaluate variety characteristics on changing of exhaust gas composition by each $NO_x$ control device, and the heavy duty diesel trucks were chosen as experimental vehicles. From the result, it revealed that vehicles (with EGR) were discharged higher THC as 52.5% than that of others (with SCR). However, it did not followed that trend, in the case of CO; it was discharged as 57.2% lower than that of others (with SCR). In the future, these data would be used to apply to efficient $NO_x$ control device for meeting to EURO 6.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.113-123
• /
• 1990

Tungsten film was deposited on the single crystal silicon wafer in a low pressure chemical vapor deposition reactor from silane and tungsten hexafluoride in the temperature range of $250-400^{\circ}C$ Deposition rate was found to be determined by the mass transfer rate of reactants from the gas phase to the safter surface. It was found out that tungsten films deposited contained about 3 atomic $\%$ of silicon and that the crystallinity and the grain size increased as the deposition temperature was increased. The resistivity of the film was measured to be in the range of $7~25{\mu}{\Omega}-cm$ and decreased with increasing deposition temperature. The adhesion of the tungsten film on a silicon surface was measured by the tape peel off test and it was improved with increasing deposition temperature. From the analysis of the gas composition, the reaction pathway to form $SiF_{4}$ and $H_{2}$ was found to be more favorable than HF formation.

• Korean journal of applied entomology
• /
• v.10 no.2
• /
• pp.97-101
• /
• 1971

1. The experiment was conducted to investigate the physiological characteristics on ten isolates of bacterial leaf blight pathogen of rice, Xanthomenas eryzae Dowson. Seven out of tin isolates were isolated from infected leaves of various rice varieties including IR strains in Korea. Isolates S-20 and S-103 were originated from IRRI in Philippines, and isolate H-5809 was allocated by National Institute of Agricultural Science in Japan. 2. All isolates Produced hydrogen sulfide and ammonia 9as from peptone sol. media, and reduced methylen blue, Gelatin liquefaction occurred by all isolates tested, although each isolate showed different degree of liquefaction No coagulation of the casein in milk by the isolates was observed, though some amount of acid production occurred in litmus milk by ail isolates tested. 3. All isolates utilized glucose and galactose, and slight utilization of esculin, mannitol, raffinose, salicin and saccharose was observed. Lactose, starch and dextrin, however, were not utilized at all by all isolates tested in the study.