• 제목/요약/키워드: 수소 탱크

검색결과 104건 처리시간 0.023초

디스펜서를 이용한 차량용 연료 탱크 수소 충전 모델링에 관한 연구 (A Study on the Modeling of Fueling Hydrogen Tank in Vehicle Using Dispenser)

  • 최지아;지상원;장지성
    • 드라이브 ㆍ 컨트롤
    • /
    • 제19권2호
    • /
    • pp.36-44
    • /
    • 2022
  • Hydrogen energy as an alternative source of energy has been receiving tremendous support around the world, and research is being actively conducted accordingly. However, most of the studies focus on hydrogen storage tanks and only are few studies on interpreting the hydrogen filling system itself. In this study, with reference to SAE J2601, a hydrogen fueling protocol, a simulation model was developed that can confirm the behavior of the vehicle's internal tank during hydrogen fueling. With respect to factors such as fuel supply temperature, ambient temperature, and pressure increase rate, the developed model can check the change of temperature and pressure in the tank and the state of hydrogen charging during hydrogen fueling. The validity of the developed simulation model was confirmed by comparing the simulation results with the experimental results presented in SAE J2601.

지하주차장 수소연료차 수소탱크 폭발 압력 예측을 위한 기초 연구 (A basic study for explosion pressure prediction of hydrogen fuel vehicle hydrogen tanks in underground parking lot)

  • 이호형;김효규;유지오;이후영;권오승
    • 한국터널지하공간학회 논문집
    • /
    • 제23권6호
    • /
    • pp.605-612
    • /
    • 2021
  • 지구온난화로 인한 이상기후로 전 세계적 피해가 커지고 있는 가운데, 내연기관의 온실가스 배출을 줄이기 위하여, 친환경자동차 도입이 가속화되고 있다. 이에 각국에서는 수소연료자동차의 안전성 확보를 위해 터널이나 지하주차장과 같은 반밀폐공간에서 수소 연료 폭발에 대비한 많은 연구가 진행되고 있다. 본 연구에서는 반밀폐공간이라 할 수 있는 지하주차장을 대상으로 수소탱크의 폭발을 등가 TNT 모델을 적용하여 폭발압력을 예측하고 이 값을 폭발압력에 따른 피해범위 및 영향을 분석하였다. 등가 TNT 모델을 적용한 수소탱크 폭발압력 예측 결과 수소용량이 52 Liter인 경우를 기준으로 75 Liter, 156 Liter인 경우 1.5 m 높이에서 각각 약 1.12배, 2.30배 높은 것으로 나타났다. 예측된 최대폭발압력을 충격량으로 환산하여 인체 및 건물에 미치는 영향을 검토한 결과 모든 예측값이 폐 손상 또는 심각한 부분 파괴가 발생할 것으로 예측 되었으며, 예측된 피해정도는 폭발에 따른 충격량만으로 환산 적용한 것이며, 폭발에 따른 부가적인 피해를 고려한다면 실제 피해는 더욱 증가되어 이에 대한 안전 및 방재의 대책이 강구되어야 할 것으로 사료된다.

수소저장합금을 이용한 수소저장탱크의 구조에 따른 수소저장 특성 연구 (Study on the Characteristics of Hydrogen Storage according to the Structure of Storage Tank using Metal Hydride)

  • 심규성;명광식;김정덕;김종원
    • 한국수소및신에너지학회논문집
    • /
    • 제13권1호
    • /
    • pp.90-99
    • /
    • 2002
  • In order to utilize hydrogen energy in a large-scale in the future, development of effective hydrogen storage method is essentially required as well as that of efficient hydrogen production method. The hydrogen storage method using metal hydrides has been holding the spotlight as a safer and higher-density hydrogen storage method than conventional hydrogen storage methods such as liquid hydrogen or compressed hydrogen storage method. However when metals react with hydrogen to store hydrogen as metal hydrides, they undergo exothermic reactions, while metal hydrides evolve hydrogen by endothermic reaction. Therefore, hydrogen storage tank should have such structure that it can absorb or release reaction heat rapidly and efficiently. In this study, a review on the improvement of the heat release and absorption structure in the hydrogen storage tank was conducted, and as a result, a new type of hydrogen storage tank with the structure of vertical-type wall was designed and manufactured. Experimental results showed that this new type of tank could be used as an efficient hydrogen storage tank because its structure is simpler and manufacture is easier than cup-type hydrogen storage tank with the structure of packed horizontal cup.

LH2 멤브레인 저장탱크 인수기지 공정모사 및 설계조건 변화에 따른 BOG 발생량 예측 (Process Simulation of LH2 Receiving Terminal with Membrane Storage Tank and Prediction of BOG Generation According to Change of Design Conditions)

  • 김동혁;이영범;서흥석;권용수;박창원;권휘웅
    • 한국가스학회지
    • /
    • 제26권5호
    • /
    • pp.49-57
    • /
    • 2022
  • 미래에 수소 산업이 활성화되면 LH2 멤브레인 저장탱크 인수기지는 대용량 액화수소를 저장하고 송출할 수 있는 주요한 방안이다. 현재 이러한 인수기지가 존재하지 않기에, 기존 LNG 멤브레인 저장탱크 인수기지 설계 자료를 참고하여 기지 공정모사 모델을 완성하였다. 이 모델을 베이스로 하여 멤브레인 저장탱크 인수기지 운영에서 매우 주요한 인자인 기지 설계조건 변화에 따른 BOG 발생량을 예측하였다. 이를 통하여 LH2 멤브레인 저장탱크 인수기지가 운영될 때를 대비하여 하역시 BOG 발생량을 최소화 할 수 있는 적절한 운전조건을 검토하고자 하였다.

수압파열시험 시 시료 탱크 내부 기포 제거를 위한 주입 노즐 및 내부 유속 연구 (A Study on Injection Nozzle and Internal Flow Velocity for Removing Air Bubbles inside the Sample Tanks during Hydraulic Rupture Test)

  • 이예승;양현석;정우철;이동훈;공만식
    • 한국가스학회지
    • /
    • 제26권6호
    • /
    • pp.9-15
    • /
    • 2022
  • 사용 압력 범위에서 고압 수소 탱크의 내구성을 검증하기 위해서는 수압 파열 시험이 수행되어야 한다. 그런데 물의 초기 주입 과정에서 물과 공기의 상호작용에 의해 생성된 기포가 탱크 내벽에 부착되어 잔류할 경우, 가압된 탱크가 파열되는 과정에서 기포의 급격한 압력 변화로 인해 큰 충격과 소음이 유발된다. 따라서 본 연구에서는 단순화된 수식을 통하여 탱크 내벽에 잔류하는 기포를 제거하기 위해 필요한 유속을 예측하였으며, 수소 버스용수소 용기 형상을 기준으로 해당 유속을 유지하기 위한 주입 노즐의 형상을 결정하였다. 또한 입구 압력에 따른 유속 변화를 예측하기 위하여 수치 해석 모델의 개발이 수행되었고, 예측 결과의 타당성을 입증하기 위하여 모형 제작을 통한 실험이 수행되었다. 실험 결과, 탱크 벽면 근처의 유속은 해석모델 예측 값과 유사하게 나타났으며, 입구 압력이 1.5 ~ 5.5 bar 일 경우 제거 가능한 기포의 최소 크기는 약 2.2 ~ 4.6 mm로 예측되었다.

3차원 디지털 스페클 토모그래피를 이용한 수소 유동의 밀도 분포 분석 (Analysis of Density Distribution for Hydrogen Flow Using Three-dimensional Digital Speckle Tomography)

  • 안성수;고한서
    • 한국수소및신에너지학회논문집
    • /
    • 제16권3호
    • /
    • pp.253-261
    • /
    • 2005
  • 석유 연료 고갈 해결 및 온실 효과 가스 배풀 저감을 위한 방안으로 제시되는 수소는 다양한 에너지 저장체로 사용되어 질 수 있으나 안전성에 대한 연구가 요구되어진다. 따라서, 일반적인 저장 형태인 고압 저장 탱크에서 누출이 되었을 경우 분사되는 수소의 거동에 대한 연구가 이루어져야하며 이를 바탕으로 한 보완책이 제시되어야 한다. 이번 연구에서는 누설 시 확산되는 수소의 밀도를 실제 거동과 유사한 3차원 컴퓨터 영상장으로 합성한 후 ART(algebraic reconstruction technique) 및 MART(multiplicative ART)를 기반으로 한 3차원 디지털 스페클 토모그래피 기법을 개발하여 재건하고 분석하였다.

포화상태에 놓인 C-Type 액체수소 탱크의 슬로싱이 열 유속과 BOG에 미치는 변화의 수치적 분석 (Numerical Study of Heat Flux and BOG in C-Type Liquefied Hydrogen Tank under Sloshing Excitation at the Saturated State)

  • 이진호;황세윤;이성제;이장현
    • 한국전산구조공학회논문집
    • /
    • 제35권5호
    • /
    • pp.299-308
    • /
    • 2022
  • 본 논문은 슬로싱 상태에 놓인 포화 상태 액체수소탱크에서 열 유속 및 BOG(Boil-off gas)의 경향을 다루고 있다. 특히, 액체-기체간의 침투 및 혼합에 의한 열 교환에 관심을 두었다. 먼저, VOF(Volume of fluid)와 Eulerian 기반의 다상 유동모델로 모형 슬로싱 실험을 모사하여 압력을 예측하고 계측된 값과 비교하였다. 자유 수면 및 충격 압력 실험 결과와 해석 결과를 비교하였으며, 유체의 속도 예측에서 정확할 수 있음을 간접적으로 증명하였다. 그리고 2차원의 Type-C 원통형 수소탱크를 대상으로 다상열유동해석을 수행하였다. 이때 포화상태에 놓인 액체 및 기체수소를 가정하고, 해석을 통해 각 상간의 혼합에 의한 열 교환의 수준을 확인하고자 하였다. 단, 상간의 열 교환만을 관심으로 두고 있었으므로 질량전달 및 기화모델은 해석에서 제외하였다. 최종적으로 상의 혼합으로 인해 액체수소로 유입되는 열 유속의 기여도에 대하여 정리하였다. 또한 액체수소로 유입되는 열 유속과 집중 질량 기반의 간이식을 통해 BOG 발생량 및 경향을 예측하고 분석하였다.

고압 충전 시 수소 저장 탱크의 온도 변화 및 충전량에 관한 해석 (An Analysis on the Temperature Changes and the Amount of Charging of Hydrogen in the Hydrogen Storage Tanks During High-Pressure Filling)

  • 이길강;이길초;명노석;박경우;장선준;권정태
    • 한국수소및신에너지학회논문집
    • /
    • 제32권3호
    • /
    • pp.163-171
    • /
    • 2021
  • Securing energy sources is a key element essential to economic and industrial development in modern society, and research on renewable energy and hydrogen energy is now actively carried out. This research was conducted through experiments and analytical methods on the hydrogen filling process in the hydrogen storage tank of the hydrogen charging station. When low-temperature, high-pressure hydrogen was injected into a high-pressure tanks where hydrogen is charged, the theoretical method was used to analyze the changes in temperature and pressure inside the high-pressure tanks, the amount of hydrogen charge, and the charging time. The analysis was conducted in the initial vacuum state, called the First Cycle, and when the residual pressure was present inside the tanks, called the Second Cycle. As a result of the analysis, the highest temperature inside the tanks in the First Cycle of the high-pressure tank increased to 442.11 K, the temperature measured through the experiment was 441.77 K, the Second Cycle increased to 397.12 K, and the temperature measured through the experiment was 398 K. The results obtained through experimentation and analysis differ within ±1%. The results of this study will be useful for future hydrogen energy research and hydrogen charging station.

수소연료전지선박의 탱크 내 누출시나리오에 따른 영향분석 (The Impact Analysis of the Leakage Scenario in the Tank of Hydrogen Fuel Cell Vessel)

  • 임상진;이윤호
    • 한국가스학회지
    • /
    • 제27권1호
    • /
    • pp.13-22
    • /
    • 2023
  • 현재 통용되고 있는 화석연료로부터 발생되는 환경오염에 대한 대안으로써 대기오염이 발생하지 않는 수소를 사용하기 위한 연구가 활발히 이루어지고 있다. 하지만, 최근까지도 수소 누출에 의한 화재 및 폭발사고가 발생함에 따라 특수한 환경인 선박에서 수소를 상용화하기 위해 안전에 관한 연구가 더욱 필요하다. 따라서 본 연구에서는 수소저장탱크가 설비된 수소연료전지 추진선박이 울산 장생포항을 운항하던 중 누출사고가 발생할 경우의 계절별 대안 시나리오와 최악의 시나리오를 가정하였다. 또한, 환경변수를 고려하기 위하여 기상청 2021년도 연평균 기상자료와 통계청 지리정보 자료를 토대로 ALOHA와 프로빗 분석을 통해 피해 영향 범위를 도출하였다. 복사열이 대안 시나리오와 최악의 시나리오 모두에서 과압과 화염의 피해 영향범위 보다 넓은 피해범위가 나타났고 프로빗 분석 결과 가정한 모든 구역에서 99%의 사망률을 확인하였다.