• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.19-29
• /
• 2021

Due to the climate changing, the world's countries are tightening regulations on CO2 and air pollutants emission to solve them. In addition, eco friendly vehicles is increasing to replace automobiles in internal combustion engine. Recently, the government is supporting the expansion of hydrogen refueling infrastructure and localization of core equipment in refueling facilities according to the hydrogen economy road map. In this study, design of the Excess flow limiting device in FCEV cylinder valve using by finite element analysis and performed performance tests on prototype. Major test results as hydrostatic strength, continued operation, operation, pressure impulse, leakage showed that the excess flow limiting device meets the performance requirements according to ISO 12619-2 and ISO 12619-11.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.28-39
• /
• 2019

In this paper is image characteristics of main gas can be a basic data for the identification of the type of leaking gas and the estimation of the emission quantity in OGI(Optical Gas Image) technology. The purpose of this research is to observe the differences of leaking gas images of the two important hydrocarbons of methane and propane in the industry. We fabricated a wind shield of quartz-based with infrared-permeable properties was prepared and methane and propane were simultaneous emission and then photographed with an infrared OGI camera and we are analyzed it. We have a stable image with windbreak of quartz-based minimizes the effect of wind. As a result of analyzing the image of two hydrocarbons with a leakage gas reference value of 1 L/min, an easily recognizable distances by OGI camera were 6 m for methane and 9 m for propane. In the distances range of 1 to 10 m between the infrared camera and the leaking gas point, the gas plume size of the propane gas was larger and clear than that of the methane gas plume. Compared with the number of points in the image, propane was 3.8 times more than methane.

• Journal of Hydrogen and New Energy
• /
• v.32 no.6
• /
• pp.455-463
• /
• 2021

In this study, CeO₂ support is synthesized from cerium hydroxy carbonate prepared using precipitation/digestion method using KOH and K₂CO₃ as the precipitants. The Cu was impregnated to CeO₂ support with the different loading (Cu loading=10-40 wt. %). The prepared Cu/CeO₂ catalysts were applied to a single stage water gas shift (WGS) reaction. Among the prepared catalysts, the 20Cu/CeO₂ catalyst contained 20 wt.% of Cu showed the highest CO conversion (Xco=68% at 400℃). This result was mainly due to a large amount of active sites. In addition, the activity of the 20 Cu/CeO₂ catalyst was maintained without being deactivated for 100 hours because of the strong interaction between Cu and CeO₂. Therefore, it was confirmed that 20 Cu/CeO₂ is a suitable catalyst for a single WGS reaction.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.50-56
• /
• 2003

This research was performed to select an appropriate agent to extract preservative components from CCA-treated wood, and then to evaluate the effect of reagent concentration, extracting temperature, and extracting time on the removal of chrome, copper, and arsenic from treated wood. Hydrogen peroxide was selected as the best extracting agent when considered extraction yield as well as use and environmental safety. Its extraction yield was dependent on extracting variables (temperature, concentration, and time), and a highly significant interaction existed among variables. It should be possible to optimize extraction by manipulating these extracting variables. The results may suggest that the required temperature conditions for the reasonable removal of CCA components are at least above 40℃ because extracting time is too long at low temperature (20℃). Reagent concentrations for extracting at above 40℃ should be decided by considering the extracting time.

• Journal of Hydrogen and New Energy
• /
• v.33 no.3
• /
• pp.219-225
• /
• 2022

In this study, as one part of the studies on the mechanical properties of the polymer electrolyte membrane, a study was conducted on the change in the mechanical properties due to hydration before and after aging of the polymer electrolyte membrane. The mechanical properties of the polymer electrolyte membrane changes due to hydration were confirmed through tensile tests of hydrated and non-hydrated Nafion 117. As results of this study, non-hydrated membrane showed higher mechanical properties than hydrated thing in the elastic region and some plastic regions. But, it was confirmed that hydrated membrane exhibited higher mechanical properties than non-hydrated thing in the large plastic region. Hydrated membrane has a lower glass transition temperature than non-hydrated thing due to the role of water as a plasticizer. In addition, the number of ion aggregates decreases, but the size increases, and the hydrated Nafion 117 is thought to have different mechanical properties from that of the non-hydrated thing due to the characteristic that the internal attraction is strengthened.

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.49-57
• /
• 2022

If the hydrogen industry is activated in the future, the LH2 receiving terminal with membrane storage tank is a major way to store and send large capacity hydrogen. Since such a LH2 receiving terminal does not currently exist, the process simulation model of it was completed by referring to the design data on existing LNG receiving terminal with same typed storage tank. Based on this model, the amount of BOG generation according to change of design conditions, which is a very important factor in the operation of LH2 receiving terminal, was predicted. Through this, it was attempted to review the appropriate operating conditions to minimize the amount of BOG generated during unloading in LH2 receiving terminal with membrane storage tank.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.244.2-244.2
• /
• 2016

폴리 실리콘 박막은 저온 안정성, 산화 안정성, 가스 투과성 및 전기재료로서의 우수한 물성 때문에 산업에서 계속적으로 넓게 쓰이고 있다. 특히 최근 높은 색 재현율과 고화질로 각광을 받고 있는 능동형 유기발광 다이오드 (AMOLED)를 위한 Thin Film Transistor (TFT)는 신뢰성 및 우수한 특성이 요구되기 때문에 반드시 폴리실리콘 TFT가 적용되어야 한다. 이러한 이유 때문에 아모포스 실리콘을 폴리실리콘으로 결정화 시키는 방법들이 많이 연구 되어져왔다. 이 연구에서는 아모포스 실리콘 박막을 고품질의 폴리실리콘 박막으로 제조하기 위해, 기판에 positive DC 전압을 펄스 형태로 인가함으로써, 기판에 입사되는 전자를 이용한 열처리 방법을 사용하였다. 열처리 온도는 기판에 들어오는 current값을 조절함으로써 제어할 수 있었다. 열처리를 위해 사용 된 수소화 된 아모포스 실리콘은 Low Pressure Chemical Vapor Deposition (LPCVD)장비로 530도에서 증착 되었으며, 이러한 아모포스 실리콘 박막은 공정시간 60 s 이내에 샘플 표면온도가 600도 이상으로 증가함으로써 균일한 폴리실리콘 막으로 제조 되었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.305-307
• /
• 2003

우리가 숨쉬고 있는 대기 중에는 많은 부유 먼지가 존재하고 있으며, 이는 산업활동의 증가와 도시화, 차량 수 등의 증가로 인하여 그 종류와 농도가 크게 변화하여 자연 생태계 및 인체 건강에 심각한 영향과 피해를 유발시키고 있다(1989; 1996). 이러한 부유 먼지는 거대먼지(coarse particle)와 미세먼지(fine particle)로 분류할 수 있다. 미세먼지에는 여러 가지 금속성분, 유기물질,virus, 조류 및 곰팡이 등이 포함되어 있으며, 다환 방향 족 탄화수소(polycyclic aromatic hydrocarbon, PAH) 등의 발암성 물질이 포함되어 있다. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.267-270
• /
• 1997

악취 물질은 주로 정유공장, 분뇨 처리장, 축산$\cdot$수산 가공업, 화학공장 등에서 발생하며 작업장 내의 직원 뿐만 아니라 인근 지역주민들에게 정신적인 불쾌감을 주는 동시에 인체에 매우 유해한 물질들이다. 이들 악취의 주성분은 메틸머켑탄, 황화수소, 암모니아, 트리메틸아민 등의 물질이다. 이들 물질의 제거 방법에는 약액세정법, 직접연소법, 활성탄흡착법 등이 있다. 이중 활성탄 홉착법은 설비비와 운영경비상의 잇점으로 오랫동안 사용되어져 왔고, 현재도 악취가 많이 발생하는 사업장의 악취 제거 방법으로 널리 사용되고 있다. 그러나 기존의 활성탄을 이용한 흡착제거는 처리효율이 낮고, 이에 따른 흡착제의 충진량이 많아지고 시설용량이 커지는 등의 결점이 있다. 이러한 문제점을 해결하기 위해 활성탄의 성질의 개선과 ACF와 같은 흡착제의 활용등에 대한 연구들이 진행되고 있다. (중략)

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.119-119
• /
• 2003

탄화규소나 열분해 탄소는 고온 특성 및 화학적인 안정성 이 우수하여 단미 혹은 코팅재로로 소재의 성능을 향상시키기 위하여 에너지 관련 분야, 반도체 치구 분야, 방위산업 및 항공우주 분야와 원자력 분야에서 다양하게 사용된다. 특히 원자력 분야에서는 고온형 원자로의 노심 요소 부품으로 적용 및 개발을 고려하고 있으며, 대표적인 예로 수소생산용 초고온 가스냉각로의 코팅 핵연료 입자를 들 수 있다. 일반적으로 TRISO라 불리는 가스냉각로 핵연료는 구형 $UO_2$ kemel의 주변을 PyC-SiC -PyC의 삼중 코팅층으로 둘러싸는 구조를 하고 있으며, 이 코팅층들은 kernel물질이 분열하는 동안 발생되는 내부 기체 압력을 견디는 압력용기 역할과 기체나 금속 핵분열 생성물들을 가두는 확산 장벽 역할을 하게 된다. 본 연구에서는 구형의 $UO_2$대신 선행연구를 위하여 구형 ZrO$_2$를 이용하여 증착온도나 시간 및 입력기체비 등의 화학증착 변수로 조절하여 SiC 및 PyC을 코팅하고, 각 변수들에 의한 증착층의 거동을 고찰하고자 하였다.