• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1377-1382
• /
• 2011

Recently, alternative and novel energy resources have been developed for use in the future because of the current environmental problems and exhaustion of fossil energy resources. Hydrogen energy has many merits, such as its environmental friendliness, easy storage, and easy production, but it also has disadvantages, in that it is highly combustible and explosive. In this study, a test procedure using a simple SP test under highly pressurized hydrogen gas conditions was established. In order to evaluate its applicability, SP tests were carried out using a stainless steel (SUS316L) sample under atmospheric, pressurized helium, and pressurized hydrogen gas conditions. The results under the pressurized hydrogen gas condition showed fissuring and produced a reduction of the elongation in the plastic instability region due to hydrogen embrittlement, showing the effectiveness of the current in-situ SP test.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.289-296
• /
• 2008

Electrochemical studies were performed by a half-cell test for the nickel hydroxide (cathode) and hydrogen storage alloy(anode) electrodes for the sealed Ni-MH batteries applicable to industrial use. The electrodes were fabricated and checked a charge efficiency and an internal pressure of the battery during charge-discharge cycling. In order to reduce the internal pressure of the sealed Ni-MH battery, cyclic voltammetry (CV) were performed on the electrodes of nickel hydroxide(cathode) and hydrogen storage alloy(anode), respectively. The results of the test showed clearly the oxidation/reduction and oxygen evolution reaction in a nickel hydroxide electrode and the hydrogenation behavior of a hydrogen storage electrode. The sealed Ni-MH battery of 130Ah was fabricated by using nickel hydroxide of a high over-voltage for an oxygen gas evolution and hydrogen storage alloy of a good performance for activation The battery showed a good characteristics such as a high charge efficiency of 98% at 1 C charge current, a low level internal pressure of 4 atm on a continuous over-charging and a large preservation capacity of 95% at 400 cycle.

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.49-57
• /
• 2022

If the hydrogen industry is activated in the future, the LH2 receiving terminal with membrane storage tank is a major way to store and send large capacity hydrogen. Since such a LH2 receiving terminal does not currently exist, the process simulation model of it was completed by referring to the design data on existing LNG receiving terminal with same typed storage tank. Based on this model, the amount of BOG generation according to change of design conditions, which is a very important factor in the operation of LH2 receiving terminal, was predicted. Through this, it was attempted to review the appropriate operating conditions to minimize the amount of BOG generated during unloading in LH2 receiving terminal with membrane storage tank.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.231-231
• /
• 2010

아직까지 국내에서 사용하는 대부분의 에너지는 화석연료에 의존하고 있다. 지하자원에서 나오는 석탄, 석유와 같은 화석연료는 다른 에너지원에 비해 운송이 간편하고 쉽게 이용할 수 있는 장점이 있지만, 환경오염의 문제성과 오일가상승, 자원의양 및 저장장소가 한정되어 있다는 단점을 가지고 있다. 이에 따라 수소와 같은 대체에너지를 이용하여 환경오염을 예방하고 무한히 사용할 수 있는 에너지원을 개발하기 위한 대체 방안들이 연구되고 있다. 폐기물 가스화시 발생되는 합성가스(CO, $CO_2$, $CH_4$, $H_2$) 내 일차로 생성된 일산화탄소는 수증기와 반응함으로써 이산화탄소로 전환이 가능하다. 잔류 메탄은 이산화탄소를 이용하여 개질함으로써 합성가스내 수소농도를 높일 수 있다. 전환된 잔류가스(CO, $CO_2$, $H_2$)내 일산화탄소는 산소를 이용하여 이산화탄소로 산화시킬 수 있으며, 산화된 이산화탄소는 흡착제를 이용하여 제거가 가능하다. 본 연구에서는 실제 가스화시 발생되는 합성가스를 이용하기 위하여, RPF가스화시 발생되는 합성가스를 직접 포집하여 실험을 진행하였다. 합성가스내 소량의 메탄은 니켈촉매를 이용하여 수소로 전화시켰으며, 잔류하는 일산화탄소는 백금촉매, 이산화탄소는 탄산나트륨 흡착제를 이용하여 연속적으로 제거함으로써 순수한 수소를 제공하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.226-232
• /
• 2013

A compact hydrogen generation device of fuel cell system using chemical hydride storage technique was designed to fit the propulsion device requirement of a small unmanned aerial vehicle(SUAV). For high efficient, compact, and lightweight hydrogen generation control device, the Co-B catalyst hydrogen conversion rate by $NaBH_4$ aqueous solution flux is measured so that the proper amount of Co-B catalyst for maximum hydrogen generation of 100W stack was proposed. A compact hydrogen generation device is controlled by pump's on/off using its own internal pressure and consumes fuel in high efficiency through a dead-end type fuel cell. The fuel cell system has stable operation for a planed flight profile. The system operates up to maximum 7 hours and at least 4 hours for tough flight profiles.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.331-334
• /
• 2009

An air-independent propulsion (AIP) system based on fuel cell technologies was developed for space and underwater applications in the present study. Hydrogen peroxide was selected as an oxidizer for space and underwater power applications where air independence is a must. Catalytic decomposition of hydrogen peroxide was used to generate oxygen and water. The pure oxygen was provided to a fuel cell and the water was stored separately. Sodium borohydride in the solid state was used as a hydrogen source in the present study. Pure hydrogen can be generated by a catalytic hydrolysis reaction. A fuel cell system was fabricated to validate the fuel cell based air-independent power system and was evaluated at the various conditions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.4
• /
• pp.379-385
• /
• 2005

Effects of Co and Co-P catalysts on the hydrolysis of alkaline $NaBH_4$ solution were investigated. Co and Co-P catalysts were prepared on Cu substrate by electroplating. Hydrogen generation rate of Co-P catalyst was much faster than that of Co catalyst, demonstrating that Co-P had higher intrinsic catalytic activity for the hydrolysis of $NaBH_4$ than Co. Hydrogen generation properties of Co-P catalysts largely depended on cathodic current density and electroplating time because they influenced on the P concentration of the Co-P catalysts. Maximum hydrogen generation rate of Co-P catalyst was 1066 ml/min.g-catalyst in 1 wt.% NaOH + 10 wt.% $NaBH_4$ solution at $20^{\circ}C$, which was obtained at cathodic current density of $0.01\;A/cm^2$ for 130 s.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.4
• /
• pp.333-349
• /
• 2013

As the capacity of spent nuclear fuel storage pool at reactor sites becomes saturated in ten years, long term dry storage strategy has been recently discussed as an alternative option in Korea. In this study, we reviewed safety-criteria-related research results on spent nuclear fuel performance and integrity under long-term dry storage and proposed the direction and the scope of future domestic research and development. Creep and hydride effect in relation to the embrittlement are known to be the major degradation mechanisms of the spent fuels during the long term dry storage. However, recent research results showed that hydride reorientation and hydride embrittlement are one of the most critical factors to the spent fuel integrity. Accordingly safety criteria of US and Japan for the storage system are basically founded on those mechanisms. However, in Korea, not only in-pile but out-of-pile experimental data have not been generated to understand fuel cladding degradation and to determine the criteria to ensure the safety. In addition, the transient behavior of the spent fuel during transportation also needs to be thoroughly examined. Therefore, various experimental research and development will be required to establish our own safety criteria for future long-term dry storage of domestic spent fuels.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.05a
• /
• pp.114-117
• /
• 1994

아연-산화은 전지는 높은 에너지 및 전력밀도를 가지고 있으나 비싼 제작비용 때문에 우주항공, 군사무기 등 특수한 분야에서 주로 이용되며, 특히 전해액이 별도의 용기에 보관되어 있다가 외부 신호에 의해 충전된 dry상태의 전지에 주입되어 활성화되는 1차 또는 비축형 아연산화은 전지는 우수한 고율방전 특성, 장시간의 저장기간 및 활성화와 동시에 부하를 인가 할 수 있는 특성 때문에 많은 무기체계에서 이용하고 있다. 이러한 아연-산화은 전지의 아연전극은 높은 다공도와 반응 면적을 가져야 하며, 특히 방전중 아연전극의 전위는 가역 수소전위 보다 더 음전위이기 때문에 수소가스가 다량 발생하게 되므로 수은과 같은 높은 과전압을 갖는 물질을 첨가하여 가스 발생량을 줄이고 부동태화(passivation)를 억제하게 된다. 그러나 국내 여건상 수은을 사용하여 전지를 제작하는 것은 환경문제 등으로 인하여 어렵기 때문에 본 연구에서는 수은을 사용하지 않고 비축형 아연-산화은 전지의 음극판을 제작하기 위하여 전착법(electro deposit)과 mesh 제작방법을 혼합하여 아연전극을 제작하였으며, 기판에 석출된 아연과 아연 mesh의 질량비율에 따른 전지의 성능을 평가하였다.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.13-22
• /
• 2023

As an alternative to environmental pollution generated from fossil fuels currently in use, research is being actively conducted to use hydrogen that does not cause air pollution. As fire and explosion accidents caused by hydrogen leakage have occurred until recently, research on safety is needed to commercialize hydrogen on ships, which are special environments. In this study, a seasonal alternative scenario for each season and the worst scenario were assumed in the event of a leakage accident while a hydrogen fuel cell propulsion ship equipped with a hydrogen storage tank was navigating at JangSaengPo port in Ulsan. In order to consider environmental variables, the damage impact range was derived through ALOHA and probit analysis based on the annual average weather data for 2021 by the Korea Meteorological Administration and on geographic information data from the National Statistical Office. Radiation showed a wider damage range than that of Overpressure and Flame in both the alternative and worst-case scenarios, and as a result of probit analysis, a fatality rate of 99% was confirmed in all areas.