• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.890-897
• /
• 1998

The direct wafer bonding between n-InP(001) wafer and the ${Si}_3N_4$(200 nm) film grown on the InP wafer by PECVD method was investigated. The surface states of InP wafer and ${Si}_3N_4$/InP which strongly depend upon the direct wafer bonding strength between them when they are brought into contact, were characterized by the contact angle measurement technique and atomic force microscopy. When InP wafer was etched by $50{\%}$ HF, contact angle was $5^{\circ}$ and RMS roughness was $1.54{\AA}$. When ${Si}_3N_4$ was etched by ammonia solution, RMS roughness was $3.11{\AA}$. The considerable amount of initial bonding strength between InP wafer and ${Si}_3N_4$/InP was observed when the two wafer was contacted after the etching process by $50{\%}$ HF and ammonia solution respectively. The bonded specimen was heat treated in $H^2$ or $N^2$, ambient at the temperature of $580^{\circ}C$-$680^{\circ}C$ for lhr. The bonding state was confirmed by SAT(Scannig Acoustic Tomography). The bonding strength was measured by shear force measurement of ${Si}_3N_4$/InP to InP wafer increased up to the same level of PECVD interface. The direct wafer bonding interface and ${Si}_3N_4$/InP PECVD interface were chracterized by TEM and AES.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.313-316
• /
• 2009

Synthesis of porous $CeO_2$ particles was investigated using various ionic liquids (ILs) as an effective template. The pore structure and crystalline phase of $CeO_2$ particles was affected significantly by the composition of ionic liquids. The strength of the hydrogen bonds on the anion part of ionic liquid was an essential factor to form the pore architecture of $CeO_2$ particles. Moreover, the length of alkyl group on the cation part of ionic liquid determined the pore size and surface area of $CeO_2$ particles. Among the ionic liquids, it was found that 1-Buthyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF6]) was the most effective ionic liquid to synthesize the porous $CeO_2$ particle.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.8
• /
• pp.607-614
• /
• 2007

This paper investigated that the functional group and chemical structure of additives affect ice adhesion in aqueous solutions cooling with stirring. In order to compare the effect on the ice adhesion in aqueous solutions, the functional group like carboxyl (-COOH), hydroxyl(-OH) or amine($-NH_{2}$) one were compared each other. Among the functional group, the strength of the hydrogen bonding force order is amine, hydroxyl and carboxyl one. It supports that ethylene diamine 7 mass% solution including amine group was effective to suppress the ice adhesion, though it is corrosive. Also, the ice adhesion were effectively resisted and formed lots of ice slurries in cooling experiment of 7 mass% solution of 1, 2-and 1, 3-propanediol which is different molecular structure but equal molecular weight each other.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.256-262
• /
• 2013

We synthesized thermoplastic polyurethane elastomer (TPU) with different contents of sulfuric acid group, and characterized their physical properties such as mechanical, thermal and grip properties. And the results were compared with carboxylic acid-introduced TPU. Wet slip, tensile strength and abrasion properties were increased by the introduction of acid group. Mechanical properties increased with increasing the acid content up to 0.3 wt%. However, wet slip was continually increased as the acid content increased due to increase of hydrophilicity of TPU.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.540-546
• /
• 1999

Solution conformation of cyclo-($Gln^1-Trp^2-Phe^3-{\beta}Ala^4-Leu^5-Met^6$), new NK-2 antagonist in dimethyl sulfoxide solution, has been determined by the use of two-dimensional nuclear magnetic resonance spectroscopy combined with simulated annealing calculations. The peptide exhibited converged structures with the atomic root-mean-square difference for the backbone atoms ($N,\;C^{\alpha},\;C'$) of all residues being 0.02${\AA}$ in the 25 annealed structures. The analysis of the structures indicated that the cyclic peptide has three intramolecular hydrogen bonds between $Met^6NH$ and ${\beta}Ala^4CO$, ${\beta}Ala^4NH$ and $Met^6CO$, $Phe^3NH$ and $Met^6CO$, and contain a type-I ${\beta}$-turn with Gln and Trp and ${\gamma}$-turn with Leu. The addition of an extra methylene group to Gly, i.e. P-Ala residue, may relax some unfavorable restraints in the cyclic backbone structure, hence enabling an additional hydrogen bond, which results in stabilizing one conformation.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.142-144
• /
• 2004

The effect of hot water and methanol extracts of 9 species from Korean mushrooms (Fomitopsis pinicola, Fomitella traxinea, Codyceps militaris, Phellinus linteus, Coriolus versicolor, Sparassis crispa, Ganoderma lucidum, Fomes fomentarius, Agaricus blazei) on the growth of Helicobacter pylori were examined using a Mueller-Hinton agar diffusion method. Hot water ($121^{\circ}C$) extracts from fruit bodies of F. traxinea, C. militaris, P. linteus, C. versicolor and F. pinicola showed $10{\sim}15\;mm$ inhibition zone against H. pylori. Methanol extracts of F. pinicola showed 44 mm inhibition zone, but another extracts showed no inhibition. Early fractions of DEAE-Sephadex A-25 column chromatography of methanol extracts from F. pinicola showed high inhibition activity against H. pylori.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.316-319
• /
• 1998

의류용 소재로 이용되어왔던 견을 다른 응용소재로서 이용하기 위한 연구가 이루어지고 있다. 특히, 견피브로인 단백질의 우수한 생체친화성, 흡습성, 자외선 차단력, 알코올대사촉진, 혈중콜레스테롤ㆍ혈당량저하 등의 기능성을 이용하여 생체재료로서 응용하기 위한 연구가 진행되고 있다. [1] 이러한 응용소재를 개발하기 위해서는 재생견피브로인의 제조조건에 따른 구조와 형태변화를 고려해야 하는 데 일반적으로 견피브로인을 산, 알칼리, 염, 효소처리 등에 의해 분자쇄절단이나 분자간 수소결합의 절단에 의해서 용해시킨 후 이를 js조, 방사 또는 다른 물질들과의 혼합을 통해서 재생용액, 분말, 필름, 겔, 섬유상등의 다양한 형태로 성형화할 수 있다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.286.2-286.2
• /
• 2013

기존의 이온성 고분자-금속 복합체(IPMC)는 백금(Pt)전극을 이온성 전기활성 고분자(Ionic electroactive polymer)인 나피온에 무전해 도금으로 만들어졌다. 본 연구는 백금전극을 그래핀으로 대체하여 투명 이온성 고분자-그래핀 복합체(IPGC)를 제작하였다. 그래핀은 근적외선 화학기상증착법(NIR-CVD)으로 전이금속 (Cu, Ni) 위에 탄화수소 가스(CH4)를 이용하여 성장하였다. 전이 금속위에 성장된 그래핀을 나피온 양쪽면에 van der Waals 결합력을 이용하는 습식 전이공정으로 전극을 형성하였다. IPGC는 면 저항(4-point probe), 투과도(UV/Vis spectrometer) 및 라만 분광법(Micro Raman spectroscopy)의 측정으로 그래핀 전극의 특성평가를 하였고, 전계방사 주사전자현미경(Field Emisson Scanning Electron Microscope; FE-SEM)을 사용하여 IPGC의 구조적 특성을 확인하였다. 제작된 IPGC의 성능은 백금전극을 이용한 IPMC의 변위(displacement), 힘(force), 작동 주파수(Operating frequency) 분석을 통해 비교 평가하였다.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.710-717
• /
• 2002

Molecularly imprinted polymers were prepared in particle forms by crosslinking methacrylic acid (MAA)) using all trans-retinoic acid as a template. The HPLC column packed with the prepared molecular imprinted polymers showed high capability in separation of retinoid derivatives. The column capacity factor and selectivity increased with increasing MAA to template ratio when the incorporated template amount was fixed, as it statistically generated more binding sites between host molecules and template. Molecularly imprinted polymer particles prepared via an emulsion polymerization method were round-shaped and their sizes were more uniformly distributed, but their separation capability was inferior to those obtained by solution polymerization method. It was presumably because the loss of interaction strength between MAA and the template due to hydrogen bonding either between MAA and water or between template and water during the synthesis of molecularly imprinted polymers.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.25-32
• /
• 2022

There has been a growing demand for water based-type PSA due to environmental regulations for solvent-type PSA. And accordingly, there is a growing expectation as well for tackifiers used to compensate for the problem of deterioration of physical properties. Therefore, In this study, water-based tackifiers were synthesized by changing the contents of hard and functional acrylic monomers CHMA, IBOA, and AA. And these were added to the pressure-sensitive adhesive at 10 phr and their physical properties were compared. Tackiness slightly decreased as CHMA increased and IBOA decreased. Since the intermolecular bonding force increased due to the increase in AA content, the lower the AA content showed better results. Peel strength increased as the tackifiers were added because the fluidity of the polymer chain increased. And higher AA content showed better results because more hydrogen bonds were formed. The holding power tended to decrease as CHMA increased because the content of IBOA relatively decreased which has a large influence on the holding power. And higher AA content showed better results.