니켈 촉매 상에서 에탄의 수증기 개질 반응과 수성가스 전환반응 반응에 대한 반응속도 데이터를 얻기 위하여 반응온도와 반응물의 분압을 변화시키면서 반응 실험을 수행하였다. 반응속도 데이터를 사용하여 거듭제곱 속도식 모델(power law kinetic model)과 랭미어-힌쉘우드 모델(Langmuir-Hinshelwood model)의 매개변수를 구하였다. 또한 반응 속도 모델식을 적용하여 PRO/II를 이용한 공정 모사를 통해서 에탄의 수증기 개질 반응기 사이징(sizing)을 수행하였다. 에탄을 반응물로 하여 수증기 개질 반응을 수행한 결과, 단순한 거듭제곱 속도식 모델보다 표면반응에 의하여 반응속도가 결정되는 랭미어-힌쉘우드 모델이 보다 적합하였고, 수성가스 전환반응에 대한 반응속도식은 거듭제곱 속도식 모델이 적합함을 보였다. PRO/II 시뮬레이션을 통해서 수소 생산량에 필요한 반응기의 크기를 결정할 수 있었다.
저온 수성가스전이반응에서 $Cu/ZnO/MgO/Al_2O_3$ (CZMA) 촉매의 마그네슘의 영향을 조사하기 위하여 Cu/Zn/Mg/Al의 비율을 45/45/5/5 mol%로 공침법을 사용하여 제조하였다. 제조된 촉매들은 BET, $N_2O$ 화학흡착, XRD, $H_2-TPR$ and $NH_3-TPD$를 사용하여 분석되었다. 촉매 활성 테스트는 GHSV $28,000h^{-1}$와 온도 범위 $200{\sim}320^{\circ}C$에서 수행되었다. 동일한 조건에서 마그네슘이 첨가된 촉매(CZMA 400)는 가장 낮은 환원 온도를 나타내며 활성종인 $Cu^+$가 안정적으로 존재하고 또한 많은 약산점을 보유하였다. 또한 마그네슘이 첨가된 촉매(CZMA)는 마그네슘이 첨가되지 않은 촉매(CZA)와 비교하였을 때 240 이상의 높은 온도에서 촉매 활성이 증가하였다. CZMA 400 촉매는 최적의 촉매로서 $240^{\circ}C$, GHSV $28,000h^{-1}$에서 75 h 동안 활성의 저하없이 평균 CO 전환율 77.59%를 나타내었다.
미활용 저급자원인 석유코크스를 대상으로 고순도의 수소 생산을 위한 수성가스전이반응에 적용가능성을 확인하기 위하여 Cu/ZnO/MgO/Al2O3 (CZMA) 촉매를 공침법을 사용하여 제조하였다. 제조된 촉매는 BET, H2-TPR을 사용하여 분석되었다. 촉매의 반응성 테스트는 고농도의 CO를 포함하는 합성가스로부터 단일 Low Temperature Shift 반응을 거치는 경우와 High Temperature Shift 반응을 거친 후 스팀의 응축 없이 즉시 LTS 반응을 거치는 두 가지의 경우를 비교 및 분석하였다. 두 조건에서 steam/CO 비, 유량 및 유속, 온도에 따른 반응특성을 확인하였다. 전환된 저농도의 CO와 스팀이 응축 없이 LTS로 즉시 주입되는 경우 많은 양의 스팀이 존재함에도 불구하고 대부분의 조건에서 다소 낮은 CO 전환율을 나타냈다. 또한 steam/CO비, 온도 및 유속에 대한 영향이 크게 나타나 최적의 조업조건을 결정하기에 추가적인 분석이 요구되었다. 반면, 고농도의 CO 기체를 포함하는 조건에서는 탄소침적 또는 촉매의 활성 저하가 나타나지 않았으며 대부분의 조건에서 높은 CO 전환율을 나타내었다. 결론적으로 Cu/ZnO/MgO/Al2O3 촉매를 적용하여 고농도의 CO를 포함하는 합성가스 조성에서 적절한 조업조건을 적용시키면 단일 LTS 반응을 적용해도 고농도의 CO를 CO2로 충분히 전환 가능함을 확인하였다.
Thermal shock or overheating of WGS catalyst for SEWGS system during hydrogen pre-treatment can cause reactivity decay of the catalyst. To select appropriate pre-treatment condition, temperature profiles of catalyst bed (or outside fluidized particle bed of bed insert) during pre-treatment were measured and then CO conversions of those catalysts during WGS reaction were also measured and compared. Drastic overheating of catalyst took place when we reduce catalyst at fixed bed condition and these catalysts showed low CO conversion during WGS reaction. On the contrary, there was no overheating of catalyst at fluidized bed condition not only physical mixing case but also bed insert case. Spring type bed insert showed acceptable CO conversion even at low WGS content. Consequently, feasibility of high CO conversion without decay of reactivity of catalyst and holding the WGS catalyst inside the SEWGS reactor as tablet shape were confirmed using spring type bed insert.
Attrition characteristics of WGS catalysts for pre-combustion $ CO_2$ capture were investigated to check attrition loss of those catalysts, to check change of particle size distribution during attrition tests, and to determine solid circulation direction of WGS catalysts in a SEWGS system. The cumulative attrition losses of two catalysts increased with increasing time. However, attrition loss under humidified condition was lower than that under non-humidified condition case for long-term attrition tests. Between two catalysts, attrition loss of PC-29 catalyst was higher than that of commercial catalyst for long-term attrition tests. However, the commercial catalyst generated much more fines than PC-29 catalyst during attrition. Therefore, we conclude that the PC-29 catalyst is more suitable for fluidized bed operation if we take into account the separation efficiency of cyclone. Based on the results from the tests for the effect of humidity on the attrition loss, we selected solid circulation direction from SEWGS reactor to regeneration reactor because the SEWGS reactor contains more water vapor than regeneration reactor.
본 연구의 목적은 바이오가스를 이용하여 고농도 수소 생산과 CO 제거가 가능한 글라이딩아크 플라즈마 개질 시스템의 개발이다. 이를 위하여 수성가스 전이반응기는 수증기 주입량 변화,촉매층 온도 변화에 대하여, 선택적 산화반응기는 촉매층 온도변화, 공기주입량에 대하여 실험을 진행하였다. 기준조건은 S/C 비 3, 촉매층 온도 $700^{\circ}C$, 전체가스량 16 L/min, 입력전력 2.4 kW, 바이오가스 구성비($CH_4$ : $CO_2$ ) 6 : 4이다. 이때의 실험결과는 HTS의 최적조건은 S/C비 3, 반응온도 $500^{\circ}C$, LTS의 최적조건은 S/C 비 2.9, 반응온도 $300^{\circ}C$이다. 또한 PROX I단의 최적조건은 각각 공기유입량 300 mL/min, $190^{\circ}C$, PROX II단의 최적조건은 공기유입량 200 mL/min, $190^{\circ}C$을 나타내었다. 반응기를 모두 지난 후의 합성가스는 $H_2$ 수율 55%, $CH_4$ 전환율 97%, $CO_2$ 전환율 97%, CO 선택도는 0%로 바이오가스를 개질하여 생성된 합성가스는 높은 수율을 나타내며, CO 선택도는 0%를 나타내었다.
KIER has been developed a compact and highly efficient fuel processor which is one of the key component of the residential PEM fuel cells system. The fuel processor uses methane steam reforming to convert natural gas to a mixture of water, hydrogen, carbon dioxide, carbon monoxide and unreacted methane. Then carbon monoxide is converted to carbon dioxide in water-gas-shift reactor and preferential oxidation reactor. A start-up time of the fuel processor is about 1h and CO concentration among the final product is maintained less than 5 vol. ppm. To achieve high thermal efficiency of 80% on a LHV basis, an optimal thermal network was designed. Internal heat exchange of the fuel processor is so efficient that the temperature of the reformed gas and the flue gas at the exit of the fuel processor remains less than $100^{\circ}C$. A compact design considering a mixing and distribution of the feed was applied to reduce the reactor volume. The current volume of the fuel processor is 17L with insulation.
연료전지와 수소를 사용하는 연료전지 자동차의 상용화를 위해서는 수소 공급용 수소 스테이션(hydrogen station)의 개발이 중요한 핵심 기반기술이다. 일반적으로 수소 스테이션은 탈황반응, 개질반응(reforming), 수성가스전환(WGS) 반응 및 수소분리(PSA) 장치로 구성된 수소제조 공정과 압축, 저장 및 분배 장치로 구성된 후처리(post-treatment) 공정으로 구성되어 있다. 본 총설에서는 수소 경제(hydrogen economy) 사회로의 진입을 위해 국내외에서 연구개발 중인 수소 스테이션에 대한 연구 개발 동향과 전망을 고찰하였다. 그리고 향후 풍력 및 태양열 등 재생 가능 에너지(renewable energy)원으로부터 물의 분해에 의한 수소제조 기술이 확립되기 전까지는 화석연료의 개질 반응이 수소를 제조하는 핵심기술이 될 것으로 판단된다. 따라서 화석연료의 탈황반응, 화석연료의 개질 반응에 의한 수소제조, CO 농도 저감을 위한 수성가스 전환반응 및 수소의 분리기술 등 수소 스테이션의 상용화에 필수적인 단위공정개발에 대한 최근의 연구동향을 정리하였다.
Single stage water-gas shift reaction has been carried out at a gas hourly space velocity of $150,494h^{-1}$ over $Cu-Ce_{0.8}Zr_{0.2}O_2$ catalysts prepared by a co-precipitation method. Cu loading was optimized to obtain highly active co-precipitated $Cu-Ce_{0.8}Zr_{0.2}O_2$ catalysts for single stage water-gas shift reaction. 80 wt.% $Cu-Ce_{0.8}Zr_{0.2}O_2$ exhibited the excellent catalytic performance as well as 100% $CO_2$ selectivity (CO conversion = 27% at $240^{\circ}C$ for 50 h). The high activity and stability of 80 wt.% $Cu-Ce_{0.8}Zr_{0.2}O_2$ are correlated to low activation energy and large amount of surface Cu atoms.
본 연구는 1차원 반응기 모델을 이용한 수치 시뮬레이션을 통해 수소투과량, 수소선택도, 사용된 촉매의 양, 급송흐름에서의 $H_2O/CO$ 조성비 및 Ar sweep gas가 막반응기(membrane reactor)에서의 수성가스전이반응의 성능에 미치는 영향을 분석하였다. 막반응기에서 평형상태보다 향상된 수소수율을 얻기 위해선 적어도 100 이상의 수소선택도를 가져야 함이 관찰되었으며, 수소투과량이 계속 증가될 경우에는 수소수율의 증가폭이 점차 감소됨이 보였다. 낮은 수소투과량의 경우에는 촉매량이 증가할수록 초기엔 증가된 CO 전환율을 보이다가 점차 그 증가폭이 감소되었으며, 높은 수소투과량의 경우에는 촉매의 양과 무관하게 높은 CO 전환율이 관찰되었다. 급송흐름에서의 $H_2O/CO$ 조성비가 1.5 이상인 경우엔 수소투과량이 막반응기에서의 CO 전환율에 미치는 영향이 미미하였고, 막반응기에서 평형상태보다 향상된 CO 전환율을 얻기 위해선 적어도 $6.7{\times}10^{-6}mol\;s^{-1}$ 의 Ar 몰유속이 필요함이 밝혀졌다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.