• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.11a
• /
• pp.241-244
• /
• 1999

시설원예는 노지원예와 달리 인위적인 환경조절을 통하여 주년안정생산이 가능하여야 하고 단위면적당 생산성을 증대시키면서 품질향상을 극대화시키는 것이 생산의 목표이다. 따라서, 주년안정생산을 위하여 고온기에 작물생산이 가능하도록 시설내 고온환경을 조절해야할 것이다. 고온환경을 조절하기 위한 냉방방식에는 자연환기 및 팬을 이용한 온실내부의 공기를 치환하는 방법, 온실내ㆍ외부에 차광망을 설치하여 온실내로 유입되는 일사량의 일부를 차단하는 방법, 수분증발을 통하여 온실내부의 잠열을 빼앗는 증발냉각방식, 히트펌프나 에어컨을 이용한 기계적인 방법이 이용되고 있다. (중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.160-165
• /
• 1999

Osmotic pressure induced by semi-permeability of hardened cement pasts and cement mortar was studied, which was considered to be a cause of failure such as separation and blistering of floor coatings or wall coatings from the concrete substrate. The specimens with a water cement ratio of 45, 60 and 75% were installed between the solution of sodium chloride and distilled water. First, we measured water flux from distilled water to sodium chloride and the ion flux of Na+ and Cl- through the specimens. Then, we measured osmotic pressure induced by semi-permeability of the specimens using an apparatus which was specially developed for this study. It was made clear that hardened cement paste and cement mortar have properties of semipermeability, and the osmotic pressure is closely related to their water cement ratio. Finally, we calculated the osmotic pressure according to Staverman's equation, which was obtained for organic membranes, and tried to explain quantitatively the observed pressure.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.369-376
• /
• 2023

In this study, the alternative to the energy-intensive conventional vacuum distillation process, an eco-friendly and energy-efficient pervaporation separation was employed in 1,2 hexane diol/water (HDO/water) mixture. The crosslinked PVA-glutaraldehyde was coated inside the alumina hollow fiber membrane (Al-HF). In the HDO/IPA pervaporation separation, optimization of the membrane concerning PVA/GA ratio, curing temperature, and pervaporation operating condition were performed. In the long-term stability test, the sustainable pervaporation separation performance giving flux in the range of 1.90~2.16 kg/m²h, and water content in permeate was higher than 99.5% (separation factor = 68) was obtained from the PVA/GA (molar ratio = 0.08, curing temperature = 80℃) coated Al-HF membrane from HDO/water (25/75, w/w, %) mixture at 40℃. Therefore, this work provides potential and inspiration for PVA-based membranes to mitigate excessive energy requirements in HDO/water separation by pervaporation.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.1
• /
• pp.6-12
• /
• 1999

This study was conducted to investigate the application of edible films to Raymyun soup packaging. The sorption isotherm curve and BET monolayer moisture content of Raymyun soup were estimated as a basic experiment. Also, the mechanical properties, water vapor permeability, and solubility of the films were investigated. Methylcellulose, sodium caseinate, and K-carrageenan films were used as edible films and glycerol and polyethylene glycol(MW 400) were used as plasticizers. In case tensile strength, methylcellulose films was 68.56 MPa and sodium caseinate film was 7.11 MPa. The elongations of sodium caseinate, methylcellulose, and K-carrageenan film were 115.41%, 23.79% and 0.60%, respectively. The water vapor permeabilties values of methylcellulose, sodium caseinate, and K-carrageenan film between 50% and 70% RH were $0.25-0.38ng{\cdot}m/m^2{\cdot}sec{\cdot}Pa,\;0.62-0.84ng{\cdot}m/m^2{\cdot}sec{\cdot}Pa\;and\;0.31-0.55ng{\cdot}m/m^2{\cdot}sec{\cdot}Pa$, respectively. For the solubility of films, sodium caseinate film showed the highest solubility and methylcellulose film showed the lowest solubility.

• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.324-330
• /
• 2015

When diagnostic ultrasounds are used, an ultrasonic transmission media is used to effectively transmit the ultrasonic energy. Types of ingredients of polymer hydro gel, emulsion, and oil gel were compared with commercialized products by measuring characteristics of ultrasonic transmission media such as skin lubricity, skin moisturizing, and dryness speed which were contained in each different media. The mean friction coefficient measured to investigate skin lubricity showed high in the agent containing a large amount of oil, whereas the mean friction coefficient of the low viscosity emulsion did not show a significant difference with that of the polymer hydro gel. The moisture evaporation measured to investigate the dryness speed of the agent showed highest in polymer hydro gel. This showed that the larger amount of oil it had, the less moisture evaporation occurred. For skin moisture measured to investigate moisturizing characteristics of skin, low viscosity emulsion showed high in moisture content, whereas it showed slowest reduction in moisture content. As a type of emulsion appropriately containing water and oil is superior in skin moisturizing and skin tenderness, it is expected to serve as a dosage form of new ultrasonic transmission media.

• Polymer(Korea)
• /
• v.37 no.5
• /
• pp.587-591
• /
• 2013

Poly(3,4-ethylenedioxythiophene) (PEDOT) has good properties such as high conductivity, optical transmittance, and chemical stability, while offering relatively weak physicochemical properties. The main purpose of this paper is the improvement of physicochemical properties such as solvent resistance and pencil hardness of PEDOT. Carboxyl groups in the anionic type waterborne polyurethane (WPU) chains can effectively crosslink each other in the presence of aziridine, resulting in physicochemically robust PEDOT/WPU organic-organic hybrid conductive thin films. The electrical conductivity, optical properties, and physicochemical properties of the hybrid conductive film were compared by varying the solid content and WPU portion in the coating precursor solution. From the results, the transparency and surface resistance of the hybrid film show a decreasing tendency with increasing solid content in the coating precursor. Moreover, solvent resistance and hardness were dramatically enhanced by hybridization of PEDOT and crosslinked WPU due to curing reactions between carboxyl groups.

• Membrane Journal
• /
• v.22 no.6
• /
• pp.424-434
• /
• 2012

In this study, a ceramic membrane was prepared by CVD. Tube type alpha alumina support was used for substrate and added the Ga salt in intermediate layer. Synthesized method was counter diffusion CVD method at $650^{\circ}C$ with tetramethylorthosilane (TMOS). Gas permeation was measured at $600^{\circ}C$ using single-component $H_2$, $N_2$, $CO_2$ and $CH_4$. During the steam treatment, $H_2/N_2$ permselectivity of non-Ga silica membrane was decreased 926 to 829 at $600^{\circ}C$. On the other hand $H_2/N_2$ permselectivity of added Ga silica membrane was stable 910 to 904 at $600^{\circ}C$. These results show that the metal-doped membranes improved steam stability for gas separation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.315-324
• /
• 2015

In this study, we prepared liquid crystal emulsion composed of amphiphilic substance $C_{14-22}$ alcohol, $C_{12-20}$ alkyl glucoside, behenyl alcohol and studied liquid crystal emulsion of properties and in vitro skin permeation. The results of formulation experiments, the clear liquid crystalline structure was observed in the ratio of $C_{14-22}$ alcohol 0.8%, $C_{12-20}$ alkyl glucoside 3.2%, behenyl alcohol 4% in the formulation. The results of physical property measurements, the viscosity of liquid crystal emulsion and O/W emulsion applied as a control group was respectively $1871.26{\sim}1.15Pa{\cdot}s$, $1768.69{\sim}1.14Pa{\cdot}s$ and the shear stress of O/W emulsion was 178.68 ~ 909.18 Pa, that of liquid crystal emulsion was 190.45 ~ 919.38 Pa. The storage modulus of O/W emulsion was 3428.53 ~ 9157.45 Pa, that of liquid crystal emulsion was 4487.82 ~ 8195.59 Pa. The tan (delta) value of O/W emulsion which means a ratio of viscosity to elasticity was 0.43 ~ 0.19, and that of liquid crystal emulsion was 0.23 ~ 0.25. The water content value on the skin for liquid crystal emulsion was significantly higher from 1 h to 6 h compared with that of O/W emulsion and the transepidermal water loss on the skin was significantly superior in skin moisture loss suppression from 30 min to 4 h compared with that of O/W emulsion. The results of skin permeation using glycyrrhizic acid, the result of skin permeation amount of liquid crystal emulsion for 24 h was $64.58{\mu}g/cm^2$, that of O/W emulsion was $37.07{\mu}g/cm^2$, that of butylene glycol solution was $41.05{\mu}g/cm^2$. Hourly permeability results, it is showed that skin penetration effect of the liquid crystal emulsion increases after 8 h. These results suggest that liquid crystal emulsions are effective for skin moisturizing effect and function as potential efficacy ingredient delivery system for the transdermal delivery.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.553-559
• /
• 2013

We make several membranes with multilayer structure and characterize protective performance in various ways. Multilayer membrane is composed of shell fabric, support membrane, functional polymer membrane and liner fabric. In this research, we apply cellulose acetate derivatives as base polymer in functional polymer membrane and characterize water resistance, water vapor permeation, protective performance against DMMP and aerosol. Test results show that cellulose based polymer with polyethyleneimine possess performance with good water vapor permeation and excellent protective capability against DMMP equivalent to Saratoga type's protective suits. Also, these materials possess aerosol protective performance and water resistance.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.179-184
• /
• 2021

Stratum corneum known as a skin barrier, which maintains water in skin, is the outer layer of the skin. Natural moisturizing factors (NMF) are one of the constituents in stratum corneum and amino acids are the highest components among NMF. In this study, we designed stearic acid-based solid lipid nanoparticles (SLNs) for improved skin penetration of serine (Ser). Ser-capsulated SLN was manufactured by double-melting emulsification method. The mean particle size and zeta potential of SLNs were 256.30 ~ 416.93 nm and -17.60 ~ -35.27 mV, respectively. The higher the degree of hydrophobicity or hydrophilicity of emulsifiers, the smaller the particle size and the higher the stability and capsulation rate. In addition, skin penetration was conducted using SkinEthic^TM RHE which is one of the reconstructed human epidermis models. The results of Ser penetration demonstrated that all SLNs enhanced than serine solution. The amount of enhanced Ser penetration from SLNs were approximately 4.1 ~ 6.2 times higher than that from Ser solution. Therefore, Ser-loaded SLN might be a promising drug delivery system for moisturizing formulation in cosmeceutical.