• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.1
• /
• pp.46-50
• /
• 1998

This study was peformed to improve extraction of insoluble proteins and to evaluate funtional properties of abolished proteins by the phytase produced by Asporgillus sp. The optimum pH, temperature, treatment time and unit of the enzyme for extraction of protein were pH 4.0~5.0, $50^{\circ}C$, 8~10 hrs and 120 units. The foaming capacity and foaming stability of sesame meal protein after enzyme treatment were virtually unchanged as compared to control. The emulsion capacity and emulsion stability of sesame meal protein was higher than control. Oil absorption as well as water absorption capacities of sesame meal protein were higher than control.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.277-294
• /
• 2010

The Seosanmaaesamjonbulsang (National Treasure No. 84) consists of light gray and coarse to mediumgrained biotite granite with partly developed pegmatite and quartz vein. The host rock is divided into dozens of rock blocks with various shape along irregular discontinuity plane. The evaluation results of discontinuity systems reveal that the host rock were exposed to instable sloping environments. Results of deterioration diagnosis show that the degree of damage has been made worse by physical weathering and surface discoloration laying stress on part that vertical and horizontal joints are massed. Generally, deterioration rate of the triad Buddha surface cover with 42.7%, however, the rate of physical weathering and surface discoloration are subdivided to 9.6% and 33.1%, respectively. Ultrasonic measurements indicate that the triad Buddha was reached highly weathered grade in general. And the rock material was weaken to show low velocity zone of 1,000m/s along irregular joint systems. Indoor and outdoor mean relative humidity of the shelter was recorded more than 70% during every season, and high frequency appears in high relative humidity range over 95%. Such environments seem to have produced dew condensation on the rock surface with rainfall and supply water, promoted physical, chemical and biological weathering along crack and joint, resulting in high permeation of water and percentage of water content. Therefore, it is judged that for scientific conservation of the triad Buddha it needs environment control through persistent preservation environment monitoring including water problem.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1995.10a
• /
• pp.100-102
• /
• 1995

국내 양액재배 면적은 94년말 53.5ha로 90년의 8.1ha에 비해 급격히 확대되었으며, 이중 오이는 15.5ha로 36%를 점유하고 있다. 오이의 경우 펄라이트경이 58.4%로 고형배지경이 대부분을 차지하고 있는데 이는 근권환경의 안정성이 높아 재배의 위험성을 경감시킬 수 있기 때문으로 생각된다. 그러나 펄라이트의 경우 자체가 갖는 수분보유력은 크지만 입자 직경에 따라 배수성이 지나치게 커서 정식후 초기활착이 곤란해질 우려가 있으므로 금액방법의 적정화, 입자크기의 선택, 왕겨, 훈탄, 입상암면 등 다양한 이종배지를 이용한 혼합배지의 활용 등을 검토할 필요가 있는 것으로 알려지고 있다. (중략)

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.685-691
• /
• 1996

This experiment was conducted to investigate the effect of some soil conditioners, such as polyvinylalcohol(PVA), zeolite and perlite, on the changes of soil physical properties and on tobacco growth in paddy-upland rotated field. Soil conditioners were treated at the rates of 120kg in PVA, 500kg in zeolite and perlite per l0a, respectively. Ratio of soil aggregates formed from the treated plots tended to. be higher than those from the control in the order of PVA > perlite > zeolite. The wet aggregate stability, mean weight diameter, moisture retention and air permeability from the treated plots tended to be higher than those from the control. Amounts of water-stable aggregates of PV A-treated soil increased with higher soil moisture showing a peak at 50% of moisture content. But with respect to particle of size aggregate formed for crop growth and workability in field, it was presumed that 40% of soil moisture content would be most desirable. Visual characters of soil surface throughout the experiment clearly showed that treated soils were maintaining better surface roughness and porosity than control, but difference in water stable aggregates among treated plots tended to be narrowed. The growths of tobacco, espacially its root zone were better in conditioner treated plots than in non-treated plot showing best in PVA-treated soil.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.74-80
• /
• 2004

Among inorganic materials, it is grounding resistance lower agent of new form that use being strata style clay and makes using water soluble polymer by main material to organic substance. Water soluble polymer chains are dispertion in water because water soluble polymer reacts with water if is done and these discrete polymer chains are inserted to floor of being strata style clay with water. This material that moisture content is very excellent and rate of expansion, electrical conductivity that measure after supplies water of 300wt % as well as is excellent. Can prevent corrosion or electrolytic corrosion of grounding bar securing very environmentally, chemically and pollution of soil. When applied to general grounding rod worker $7{\sim}8$ times ground resistance reduction effect of not application.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.38-43
• /
• 2004

Effects of heat treatment on functional properties of soy protein were examined. Soy protein isolate (SPI) was prepared from Korean soybean varieties, Manli and Taekwang, subjected to heat treatment at $60^{\circ}C$ for 30, 60, 90, and 120 min. pH-solubility results of SPI showed typical U-shape profiles with minimum solubility at pH 4-5 of isoelectric points of soy proteins, longer heat treatments showing slightly higher solubility. Water absorption, emulsifying activity, emulsion stability, and emulsion capacity of SPI increased, while oil absorption decreased, with heating time in Manli variety. Manli and Taekwang showed the highest emulsion capacities after 90-and 60-min heat treatments, respectively. Foam expansion of all SPIs increased with heating time up to 90 min. Texture profile analysis showed heat treatment up to 90 min significantly increased hardness, adhesiveness, springiness, gumminess, and chewiness, whereas significantly decreased cohesiveness of SPI gels (p<0.05).

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.109-115
• /
• 2009

The thermal stability and mechanical properties of Nephila clavata and Bassaniana decorata spider silks were measured and compared with those of aramid and polyester fibers. The thermal stability of the spider silk was lower than those of the commercial aramid and polyester fibers. However, the mechanical properties of the spider silk were far superior to that of the polyester fiber. The effect of the water content of the spider silk on its thermal stability and mechanical property was examined by conducting the silk to heat treatment at $100^{\circ}C$ under vacuum for various times. The results indicated that spider silk subjected to heat treatment for 1.5 hr had excellent thermal stability and mechanical property.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.2
• /
• pp.131-136
• /
• 2015

The objective of the present study was to evaluate the effect of moisture content on the haylage quality of Italian ryegrass (Lolium multiflorum). Seven levels of moisture content (60%, 55%, 50%, 45%, 40%, 35%, and 30%) were tested in this experiment. The results show that the feed value, crude-protein content, neutral detergent fiber, acid detergent fiber, and in vitro dry-matter digestibility were not significantly different as the moisture content decreased. The pH and lactic-acid content, however, decreased significantly as the moisture content decreased, whereas the content of acetic and butyric acid increased significantly. We concluded that a moisture content within a range from 60% to 40% is best for Italian-ryegrass haylage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.181.1-181.1
• /
• 2016

플렉서블 디스플레이 및 태양전지가 지향하고 있는 저가, 고속의 대량 생산을 위해서는 필름을 기반으로 하는 연속 공정에 의한 대량의 ITO 박막의 증착이 필수적이다. 이로 인해 롤투롤(roll-to-roll) 스퍼터링법을 이용한 ITO 박막의 연속 증착 공정이 차세대 플렉서블 디스플레이 및 태양전지의 대량 생산을 위한 해결책으로 각광받고 있다. 그러나 대부분의 폴리머 필름의 경우 증착 시 발생되는 열 또는 플라즈마에 의해 방출되는 수분과 유기 솔벤트 같은 오염 물질들에 의한 ITO 박막의 특성 저하와, 낮은 열적 안정성을 가지는 기판 특성상 고온(>$200^{\circ}C$)에서 증착이나 후 열처리를 할 수가 없기 때문에, 낮은 저항과 높은 광투과도 특성을 가지는 ITO 필름을 제작하기 위한 공정 최적화가 필요하다. 따라서, 본 연구에서는 롤투롤 스터링법으로 PET 필름 위에 Sn함량이 각각 3, 5, 7.5 10% 도핑된 ITO 타겟을 사용하여 ITO 박막을 증착 하였고, 전기적 광학적 특성을 조사하여 롤투롤 스퍼터링법으로 우수한 전기 전도도와 광투과도 특성을 가지는 ITO/PET 필름의 증착 조건을 최적화 하였다. 또한, ITO 증착 시 필름에서 발생하는 수분에 의한 ITO 박막의 특성 저하 현상에 대하여 조사하였다.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.428-433
• /
• 2010

Waterborne polyurethane(WPU) was synthesized from isophorone diisocyanate(IPDI), poly(tetramethylene glycol)(PTMG), dimethylol propionic acid(DMPA), triethylamine(TEA), ethylenediamine(EDA) and 3-aminopropyl triethoxysilane(APS) as a coupling agent. Subsequently, WPU/silica nanocomposites with different silica contents(0 to 8 wt%) were prepared by performing sol-gel reactions with tetraethylorthosilicate in the WPU matrix. The average particle size of the nanocomposite solutions increased with increasing TEOS content. Also, the prepared nanocomposites showed better thermal stability than pure WPU.