• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.65-68
• /
• 2007

수분선택흡착-VOCs흡착-압축응축식 hybrid 공정에서 수분의 선택분리가 가능한 흡착제를 선정하였다. 또한 수분흡착탑에서 미리 수분을 제거하여 VOCs의 흡착효율을 높임으로써 배출환경기준을 만족시키고 수분 혼합성 VOCs와 수분 비혼합성 VOCs 회수가 가능한 공정 운영이 가능함을 알 수 있었고, 회수된 VOCs를 곧바로 생산 공정에 재투입할 수 있는 원료물질 수준으로 회수가 가능하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1252-1258
• /
• 2022

The exhaust gas from the marine engines include a quantity of water vapor and particulate matter. The total particulate matter includes filterable particulate matter (FPM) and condensable particulate matter (CPM) that condense after releasing into the atmosphere. The portion of CPM is higher than that of FPM that is removable through the filter before discharging. An experimental setup for waste heat and water recovery and removal of CPM in the exhaust gas was tested using an industrial gas boiler in the laboratory. The water and CPM in the exhaust gas were removed through the first stage of cooling method and further removed through the second stage of absorption method. The efficiencies of water recovery were 73% after the first stage of cooling method and 90% after the second stage of absorption method. At the same time, the CPM was removed by 80-90% through the processes. The waste heat recovered could be used to process heat, and the water recovered could be used to process water in the ship. Furthermore, the CPM, which is a major source of the particulate matter but not subject to administrative regulation, could be removed effectively.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.654-658
• /
• 2012

In this study, $CO_2$ capture efficiency in relation to the inlet moisture content of the regenerator was investigated using potassium-based sorbents in the continuous process composed of two bubbling fluidized-bed reactors, where solid outlet configuration in the regenerator was converted from underflow to overflow. XRD (X-ray Diffraction), SEM (Scanning Electron Microscope) and TGA were performed to find out the effect of water pre-treatment according to inlet moisture content in the regenerator. The $K_2CO_3{\cdot}1.5H_2O$ structure of solid sorbents has been increased as inlet moisture content of the regenerator increased. As a result, the $CO_2$ capture efficiency increased as the $K_2CO_3{\cdot}1.5H_2O$ structure of solid sorbents increased since the reactivity of the sorbents has been improved by that structure generated by the water pre-treatment. And $CO_2$ capture efficiency increased about 3~8% after sorbent outlet configuration of the regenerator was changed underflow to overflow.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.11a
• /
• pp.429-430
• /
• 2004

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.249.2-249.2
• /
• 2010

최근의 고유가와 환경오염에 대한 대응 수단으로 수송용 바이오연료의 보급에 대한 관심이 세계적으로 높아지고 있다. 이 중 바이오디젤은 동식물성 기름으로부터 메탄올과의 전이에스테르화 반응에 의해 생산되는 경유대체 연료로서 환경 친화성과 지속가능성이 인정됨에 따라 그 생산량이 급격히 증가하고 있다. 바이오디젤의 생산량이 증가함에 따라 대두유, 유채유, 팜유 등의 원료유 가격 상승 및 수급 불안정 문제가 대두되고 있으며 식량자원과의 충돌 문제도 발생되고 있다. 이를 해결하기 위한 방안으로 유리지방산 함량이 높은 저가유지 자원(폐식용유, 폐돈지, 폐우지, soapstock, trapped grease)을 이용한 공정 개발 연구가 활발히 진행되고 있다. 본 연구에서는 비활용되고 있는 해외 열대작물 열매씨앗에서 착유한 식물성 오일의 바이오디젤 원료유로서의 사용 가능성을 검토하였다. 열대작물 오일의 물성 분석 결과 고형물, 수분, 인, 유리지방산 함량이 대두원유보다 매우 높게 나타났다. 오일 중의 인지질은 바이오디젤 제조 반응후 에스테르와 글리세린의 층분리를 방해하여 공정 효율을 감소시키고 유리지방산은 염기촉매와 결합하여 지방산염을 생성해 생산수율을 감소시키는 문제를 일으킨다. 고형물과 수분은 여과와 감압증발에 의해 쉽게 제거가 가능하였다. 15~20%의 유리지방산 함유 열대작물 오일의 전처리를 위해 균질계 산촉매와 비균질 고체 산촉매를 이용해 에스테르화 반응 효율을 조사한 결과 황산이 가장 높은 효율을 보였다. 반응표면분석법(Response Surface Method, RSM)을 적용해 메탄올과 촉매량의 2변수 에스테르화반응 최적화를 수행한 결과 메탄올 26%, 촉매 0.98%로 최적 조건이 도출되었으며 초기 산가 33mgKOH/g에서 0.98mgKOH/g으로 감소됨을 확인하였다. 전처리 정제한 오일의 물성분석 결과 고형물 0.1%, 수분 0.10%, 산가 1.0mgKOH/g, 인함량 20ppm 이하로 바람직한 원료유가 생산됨을 알 수 있었다. 제조된 원료유를 이용해 전이에스테르화 반응 최적화 실험을 RSM에 근거하여 진행한 결과 KOH 0.8%, 메탄올:오일 몰비 6.2:1, 반응온도 $60^{\circ}C$, 교반속도 200rpm, 반응시간 30분으로 나타났으며 증류 정제전 97.3%, 증류후 100.0%의 바이오디젤을 생산 할 수 있었다. 열대작물 오일의 전처리 공정은 메탄올을 과잉양으로 사용함으로 효과적인 알콜 회수 공정이 중요하다. 전처리 후 층분리를 통해 회수되는 메탄올 중의 수분함량은 2%~7%로서 이를 전처리 반응에 재사용하기 위해서는 0.3%이하의 수분함량으로 정제가 필요하다. 본 연구에서는 고가의 증류탑 형태가 아닌 단증류방식으로 2단계 내지 3단계로 0.3% 수분의 메탄올 회수 조건을 도출하였으며 파일롯 공정 설계를 진행하고 있다. 이로서 본 연구의 열대작물 오일은 저가로 충분한 물량의 확보가 가능하다면 바이오디젤 원료 자원으로서 큰 활용가치가 있는 것으로 판단된다.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.216-222
• /
• 1994

This study was conducted to obtain practical information on the efficient drying of animal manure under the sunny dry condition. The effects of the height of manure pile (5, 10, 15, and 20cm), stirring times (0, 1, 2, and 4 times/day), the addition of dried manure (30%, w/w), and the type of drying bed on the removal of water from fresh pig manure were investigated in a plastic house. Pig manure was dried very well by lowering the height of manure pile and the drying efficiency was the highest at 10cm height. Water evaporation rate was the greatest at the twice stirring per day treatment. The addition of dried manure as bulking material enhanced the water evaporation rate of wet pig manure. The amounts of water removed for 19 days under the condition of 10cm height of manure pile and twice-stirring in spring, summer, autumn and winter were 75.6, 73.3, 54.6 and $32.6kg/1.2m^2$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.95-100
• /
• 1985

Effects of number of washings with solvents on drying rates and physicochemical properties of dried soymilk residues(SMR) were investigated. The dried soymilk residue was prepared by washing the residue with acetone or ethanol, followed by drying at $60^{\circ}C$. Increase of number of washings with a residue/solvent ratio of 1/1.5 resulted in an increase in drying rate and in protein content of the residue while the lipid content decreased. The brightness of the dried residue and the properties of water and oil absorption were also improved by washing with acetone which was advantageous to ethanol for all of the properties measured. Washings more than 3 times with acetone or 2 times with ethanol were found to be less effective in terms of quality improvement. The more addition of dried residue into the mixture of SMR-wheat flour resulted in a linear increase of water and oil absorption characteristics.

• Journal of Animal Science and Technology
• /
• v.52 no.2
• /
• pp.131-140
• /
• 2010

This study was conducted to investigate the effects of Cordyceps ochraceostromat, silkworm cocoon, and conjugated linoleic acid (CLA) on the quality and storage properties of pork sausage manufactured with protein recovered from breast of spent laying hen during 4 wks of storage at $4^{\circ}C$. Pork sausages were prepared using 100% ham (control) and 40% recovered protein from breast of spent laying hen to replace pork (T1), and with added different sources to final concentrations of 0.1% Cordyceps ochraceostromat powder (T2), 0.1% silkworm cocoon powder (T3), 0.1% CLA (T4), 0.05% Cordyceps ochraceostromat + 0.05% silkworm cocoon (T5), 0.05% Cordyceps ochraceostromat + 0.05% CLA (T6), and 0.05% silkworm cocoon + 0.05% CLA (T7). The treatments T5 and T7 had higher (p<0.05) protein content than control, but control had lower fat content than other samples during 4 wks of storage at $4^{\circ}C$. Lightness was significantly lower in the treatment samples than control. However, there was no significant difference in water holding capacity between the sausage samples, whereas, cohesiveness and chewiness were significantly higher (p<0.05) in the control than other treatments. All sausage samples showed a significant increase in volatile basic nitrogen (VBN) and total plate counts with extending storage time (p<0.05), and VBN values of treatments were lower than the control. However, the treatment samples showed a significant decrease (p<0.05) in thiobarbituric acid reactive substances over the increasing storage time. Therefore, our results suggested that the 40% recovered protein to replace pork and with added different sources decreased lipid oxidation and protein denaturation of pork sausages, thereby enhancing self-life, compared to normal pork sausage (control).

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.176.1-176.1
• /
• 2011

바이오디젤 대체 원료로서 폐돈지, 폐우지를 이용한 오일 추출 및 바이오디젤 생산 반응을 진행하고 이때 사용되는 과잉 메탄올의 회수 및 재사용에 관한 연구를 수행하였다. 추출된 오일의 상태에 따라 전처리를 위한 에스테르화 반응여부를 판단하게 되지만 에스테르화 반응과 전이에스테르화 반응 모두에서 상당량의 과잉 메탄올을 투입하게 된다. 에스테르화 반응에서는 이론량보다 20~50배 가량을 투입하고 전이에스테르화 반응에서는 오일:메탄올 이론 몰비인 3:1 보다 2~4배 가량을 이용하게 된다. 에스테르화 반응에 사용되는 촉매는 균질계 액체 산 촉매와 불균질계 고체 산 촉매가 이용될 수 있으며 본 연구에서는 황산을 이용한 에스테르화 반응을 실시하였으며 전이에스테르화 반응에서는 KOH를 촉매로 이용하였다. 각각의 공정에 사용된 과잉 메탄올의 재이용 방안을 조사하였으며 메탄올을 단증류를 통해 회수하는 방법과 회수된 메탄올을 이용한 에스테르화 반응 및 전이에스테르화 반응을 실시해 반응성을 조사하였다. 이를 통해 미반응 과잉메탄올의 회수 정제시 메탄올의 최대 수분함량(%) 허용치를 결정할 수 있었다. 회수된 메탄올을 재이용함에 따라 바이오디젤 생산비 중의 원료(메탄올) 및 설비비 절감이 가능할 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.5
• /
• pp.289-296
• /
• 2016

The availability of NMP, a solvent used in the manufacturing process of cathode material for lithium ion battery, depends on importation, and the price remains high because of the monopoly of BASF and ISP. For these reasons, most Lithium ion battery manufacturers reuse NMP after recovering it from the exhaust air in the drying process. In Korea, absorption method is mainly used for recovering NMP from the absorption tower using the hydrophilicity of NMP. However, this system has a few disadvantages, such as low purity (80％) of the recovered NMP and 100％ emission due to high water content of the treated gas. In this study, we develop a hybrid NMP recovery system by combining cooling condensation method with concentration method, by which it is possible to obtain an NMP recovery rate of 99.6％, and a high purity (96.1％) of the recovered NMP.