• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1892-1896
• /
• 2010

최근 들어 치수 기능만을 위한 공학적 효율 위주의 하천관리 정책에서 벗어나 하천의 환경적 기능의 개선을 위한 생태하천으로의 복원사업이 이루어지고 있다. 치수적 안정성 확보를 위해 기 설치된 콘크리트 호안을 철거하는 대신에 복토후 식생매트리스 공법을 통한 자연친화적인 하천공법이 널리 사용되고 있다. 홍수로 부터 제방을 보호하기 위하여 일반적으로 제방 사면에 호안을 설치한다. 설계 홍수량의 규모가 작거나, 상대적으로 규모가 작은 하천에는 호안이 설치되어 있지 않는 경우도 있지만, 국내는 하천계획의 수립시 호안을 설치하는 것이 일반적이다. 그러나 이와 같은 자연친화적인 하천공법의 적절한 수리학적 기준이 제시되지 않아 홍수기 유실로 인한 경제적 손실이 자주 발생하고 있다. 따라서 본 연구에서는 직선수로에 친환경적인 호안을 설치하여 실험을 통하여 하천의 안정성을 살펴보았다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.316-316
• /
• 2012

본 연구에서는 국립환경과학원에서 체계화된 유역 및 하천환경 DB 구축을 통해 국내 모든 하천에 대한 수리 수문학적 기초자료를 표준화기 위해 만들고 있는 한국형 Reach File을 통하여 경안천 유역에 대해 QUAL2E 모형을 이용하여 수질모의 하고자 한다. 수질 모델링의 적용 사례를 살펴본 바에 따르면 하천을 모델링하기 위해서는 현장 특성 자료의 중요성, 특히 하천수리특성에 관련된 기초 자료의 가용성 여부가 모형의 성패에 매우 중요한 역할을 함을 알 수 있다. 유량, 유속 및 폭과 깊이로 대변되는 하천 지형은 물질 이송에 대한 주요 외력 함수이며, 다른 모든 예측치 들은 이들에 의존적일 수밖에 없다. 따라서 이들의 정확한 표현은 올바른 수질 예측에 있어서 필수적이다. 국립환경과학원에서 구축하는 한국형 Reach File에는 도형 및 속성자료를 설계하였을 뿐만 아니라, 각 수계별 주요하천에 대한 Reach별로 하상단면정보 및 수리계수를 DB화하여 관리하고 있기 때문에 대상 하천의 유량, 유속 및 수심자료를 일괄적으로 제공을 하고 있다. 본 연구에서는 한국형 Reach File을 통하여 경안천유역의 수질을 모의하였다. Reach File에는 경안천 유역의 Reach 별로 수리학적 특성인 하천연장, 하상경사, 조도계수, 수리계수등 QUAL2E 모델의 입력자료등을 제공해 줌으로써 수질모의 과정의 정량화 및 간편화를 가능하게 하였다. 또한 효율성 증대에 기여하는 바가 클 것으로 예상되며 2013년 6월부터 시행되는 한강수계 수질오염총량관리 의무제 시행과 관련하여 보다 과학적이고 정확한 모델링 결과 도출이 가능할 것으로 판단된다.

• Water for future
• /
• v.28 no.3
• /
• pp.123-132
• /
• 1995

The subject research attempts to develop a hydrologic-hydraulic forecasting system suitable for use in large river basins. A conceptual hydrologic rainfall-runoff model is used to produce streamflow from meteorological and hydrologic input data over each subbasin, while a hydraulic model is used to route the catchment outflows in the stream network. For operational flow prediction, an efficient state estimator has been designed for the real-time updating of model states from newly recorded data. The real-time application of the forecasting system indicates that this model produces reliable short-term predicted results.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.3
• /
• pp.57-66
• /
• 2016

In this study, to prevent possible collapse caused by hydraulic or mechanical instability, liquid nitrogen injection method is developed and implemented at the tip of drilling auger of steel pipe propulsion tunneling. In this study, 1/5-scale model auger and sand chamber were manufactured. The prototype diameter of steel pile (or casing) is assumed about 1,000 mm. For the frictional sandy soils and plastic weathered soils, liquid nitrogen injection methods were tested varying water contents of the soils. For the induced hydraulic instability, the ground near the drilling auger was frozen within approximately 5 minutes preventing mechanical collapse and water infiltration. Securing stability of steel pile propulsion tunneling using liquid nitrogen was much more effective for which the water content of the soil somewhat exceeds the optimum water content.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.1
• /
• pp.84-93
• /
• 2004

This study was performed : 1) to find the suitable HRT(hydralic retention time), 2) to evaluate the effects of the ratio of mixing/aeration time and injection time of external carbon source, for the removal of organics, nitrogen and phosphorus in swine wastewater by SBR(sequencing batch reactor process), which is one of the biological treatment process. The result of this study were summarized as follows : (1) As the ratio of mixing/aeration time was higher, $NH_4{^+}-N$ removal efficiency was increased and it was increased with increasing injection time of external carbon source because nitrification was affected by denitrification microbes propagation when injection time of external carbon soruce was shorted. T-N removal efficiency was increased with increasing the ratio of mixing/aeration time and injection time of external carbon source. (2) The T-P removal efficiency showed a great difference in each operating condition, and it was increased with increasing the ratio of mixing/aeration time increased and when the injection time of external carbon source was shorted because denitrification was done with effect by denitrification microbes propagation. (3) The highest removal efficiency of organic and nitrogen were obtained by the operating condition of Run 4-1(the ratio of mixing/aeration time : 16.5/5.5, injection time of external carbon source : 15hours) and T-P were obtained by the operation condition of Run 4-2(the ratio of mixing/aeration time : 16.5/5.5, injection time of external carbon source : 3hours), and efficiency(effluent concentration)of $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, T-N and T-P in the treated water was 96.1%, 87.7%, 90.6%, 86.6% and 84.5%, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1841-1850
• /
• 2013

The various types of fishways are installed at the multi-functional weirs in the four major rivers to minimize the negative effect due to the construction of the transverse structures. The movable weir was installed at the upstream of the ice-harbor type artificial fishway of the Dalseong weir in the Nakdong river, which can control the fishway flowrate regardless of the river flowrate. The incoming flowrate to the artificial fishway is closely related with the hydraulic characteristics that dominate the fish passage efficiency. Thus, it is crucial to find out the weir operation rule for properly sustaining efficient fish-passage, such as the optimized flowrate. In this study, the FLOW-3D was used to analyze and compare the various hydraulic characteristics associated with the passage efficiency, based upon the given different flowrate, and subsequently provide the optimized flowrate for the fishway movable weir to maintain the best efficient flow condition for the fish-passage.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.3
• /
• pp.178-188
• /
• 2002

Constructed wetlands typically cost less to build and operate, and require less energy than standard mechanical treatment technology but they have similar performance to centralized wastewater treatment plants. Therefore, they were constructed especially many in rural areas, where are small villages but not industries. Plantless column tests were performed to investigate the possibility on using zeolite as a filter medium of constructed wetland for the wastewater treatment. Removal efficiency was $COD_{Cr}$ 94.63% T-P 41.41% and $NH_4^+-N$ 99.75% at hydraulic load 314 $L/m^2{\cdot}d$ and filtering height 100 cm filled with a zeolite mixture. This zeolite mixture consisted of 1 : 1 by volume of zeolites in the diameter range of 0.5 to 1 mm and 1 to 3 mm. Accordingly, hydraulic load 314 $L/m^2{\cdot}d$ was considered as optimal. Three zeolite mixtures were used to determine the optimal mixing ratio by volume of a zeolite (A) in the diameter range of 0.5 to 1 mm to a zeolite (B) in the diameter range of 1 to 3 mm 1 : 3, 1 : 1 and only B in A to B by volume were tested at hydraulic load 314 $L/m^2{\cdot}d$ and filtering height 100 cm $COD_{Cr}$ removal efficiency was more than 89% at mixing ratios of 1 : 3 and 1 : 1 in A to B. That of T-P ranged 56.42 to 58.72% and, that of T-N and $NH_4^+-N$ was 87% and 99% regardless of mixing ratios of two zeolites. Removal efficiency was lower at the column filled with only B. Removal efficiency was better at Inter medium filled with mixing ratio 1 : 1 in A to B than with the other mixing ratios. Thus, it was found that the mixture of mixing ratio 1 : 1 in A to B was appropriate far Inter medium of constructed wetland Removal efficiency was higher in down-flow than in up-flow, and all contaminants were removed most in 20 cm filter height near feeding area.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.885-887
• /
• 2009

고속도로 교량이나 성토지역 노면이 제공하는 자연적인 위치에너지(동력)를 활용하여 수리학적인 입자상 오염물질 분리장치를 실험실 조건에서 운전한 결과 운전압력 0.5기압(수두 5.6m) 이상에서 90% 이상의 제거효율을 보였다. $D_{50}$는 약$45{\mu}m$이었는데 입자의 크기가 $45{\mu}m$ 보다 굵은 입자는 거의 대부분 제거되지만 $45{\mu}m$보다 작은 입자의 제거는 쉽지 않음을 시사해주고 있다. 이러한 입자를 제거하기 위한 후속장치가 필요하며 장치의 원활한 운전을 위해서 유지관리문제에 대한 치밀한 검토가 필요하다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.987-995
• /
• 2013

The purpose of this study is to examine the hydraulic stability of non-toxic revetment technique for eco-friendly design of the domestic river restoration. Recently, instead of the flood control function-oriented river management policy for the engineering efficiency, the improvement of the environmental performance for the ecological river restoration project is implemented. However, the inappropriate hydraulic design criteria of the new revetment technique happen to the economic losses at flood season frequently. The hydraulic stability of the riprap and the block include the banks of rivers, riverbed protection, scour protection and so on. In this study, the high speed experimental channel was developed, which has the maximum velocity of 3.5 m/s, to perform the hydraulic experiments of the block method with non-toxic glue with various conditions to find the critical velocity of the revetment block for the hydraulic stability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.499-505
• /
• 2011

The mixing behavior of turbidity currents in a reservoir is closely related with the annual temperature change of the reservoir. In the summer, the reservoir has a well defined structure: one or two thermoclines and some layers of different densities. This density stratification inhibits vertical mixing and affects various hydrodynamic processes within the reservoir. Therefore, many reservoirs can be operated to release water of the specific quality with the selective withdrawal. In this study, the hydraulic experiments were performed to analyze the efficiency of selective withdrawal. The velocity distributions are measured with PIV in the stratified tank with the "two-tank" method. The relationship between the Richardson number and the selective withdrawal efficiency are provided using the measured velocity distributions.