• Journal of Korea Water Resources Association
• /
• v.42 no.1
• /
• pp.21-31
• /
• 2009

The characteristics, intensity and direction of groundwater.surface water interactions are controlled by groundwater head gradients, hydraulic conductivity and by the riverbed geometry. As a result of the spatial heterogeneity of these factors and the subsequent variability of the impact of these interaction processes, the water balance is also characterized by highly variable spatial patterns and temporal dynamics. However, spatially detailed studies concerning the spatio-temporal variability of the extent and intensity of surface-groundwater interactions have been limited to the investigation of cross-sections or small stream reaches. Thus, the extensive study on the watershed based interaction between surface water and groundwater is to be analyzed. In this study, the intensity and the spatial extent of interactions along the stream were found by using integrated SWAT-MODFLOW model. This integrated modeling approach was applied to Anyangcheon watershed in Korea. The effluent stream characteristics were found in the watershed, namely, baseflow was annually discharged except heavy rainy periods. The intensity and the spatial extent of surface-groundwater interactions in different sub-watersheds were found on a daily basis. The influential extent of surface-groundwater interaction become larger as the watershed elevations are lower.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.1
• /
• pp.49-57
• /
• 2008

One of the most important design concerns for undersea tunnels is to establish design water load and flow rate. These are greatly dependent on the hydraulic factors such as water head, cover depth, hydraulic boundary conditions. In this paper, the influence of the hydraulic design factors on the ground loading and the inflow rate was investigated using the coupled finite element method. A horse shoe-shaped tunnel constructed 30 m below sea bottom was adopted to evaluate the water head effect considering various water depth for varying hydraulic conditions and relative permeability between lining and ground. The effect of cover depth was analysed for varying cover depth with the water depth of 60 m. The results were considered in terms of pore water pressure, ground loading and flow rate. Ground loading increases with an increase in water head and cover depth without depending on hydraulic boundary conditions. This points out that in leaking tunnels an increase in water depth increases seepage force which consequently increases ground loading. Furthermore, it is identified that an increase in water head and cover depth increases the rate of inflow and a decrease in the permeability ratio reduces the rate of inflow considerably.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.645-650
• /
• 2016

In this study, we conducted a numerical simulation using Navier-Stokes Solver (HYMO-WASS-3D) in order to analyze wave attenuation under wave-current interaction found in existing hydraulic experiments. It showed that wave energy and wave height are reduced as the wave propagates in coexisting fields between waves and currents. And the wave attenuation became more serious as the velocity of current and thus turbulence intensity were increased at wave-current coexisting field. As well, the wave attenuation became more serious with lower wave height and shorter period when the wave propagates the same distance under interactions between waves and currents.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.229-229
• /
• 2021

최근 이상기상으로 국지성 집중호우가 빈번하게 발생함에 따라 토사유출에 의해 피해가 증가하고 있다. 급경사 사면을 갖는 교란산지와 개발지의 경사면은 토양침식 위험에 노출되어 있다. 특히 지표유출수의 집중흐름에 의한 세류발달은 세류간침식에 비해 많은 토양침식과 토사유출을 발생시킨다. 이러한 급경사 사면에서의 세류발달에 대한 수리학적 메터니즘과 한계조건을 파악하고자 강우와 유입수 모의를 통한 토양침식 실험을 수행하였다. 강우와 유입수의 상호작용에 의한 세류발달의 특성과 토사유출량 증가를 파악하고자, 강우량의 증가와 유입수 유무에 따른 실험이 이루어졌다. 강우강도의 범위는 100~140mm/hr이고, 유입수는 170ml/s 이였다. 유입수량은 합리식으로 계산하였으며, 토양상자 상단에서 균등분사식으로 유입되었다. 세류발달의 수리학적 특성치를 취득하기 파악하기 위해, 염료주입 지표수 거동에 대한 동영상을 판독하였다. 세류발달은 유입수가 없는 경우 3분 이내 그리고 유입수가 있는 경우 30초 이내에 발생하였다. 토양상자내의 평균 유속범위는 7.83~29.27 cm/s 이였다. 실험에서 발달된 세류는 15분경과 후부터 평형상태를 유지하였다. 경사실험조건별로 세류 차수분석을 위해 각 세류의 최대길이, 폭, 넓이를 측정한 결과 세류의 차수는 강우만 있는 경우 1~2차로 발달하였으며, 유입수가 있을 때는 2~3차로 발달하였다. 지표유출이 증가하면서 세류발달의 개수는 줄었지만 규모는 더 크게 나타났다. 세류가 발달하는 시점의 한계유속은 10~20cm/s 범위인 것으로 파악되었다. 지표유출이 증가하면서 세류의 발달도 더 심화되지만, 동일한 강우에 일정시간동안 노출되면서 세류는 평형상태가 되어 더 이상 침식이 활발하게 진행되지는 않았다. 유입수가 있는 조건에서 수량은 약 2배가 증가하였지만, 토사유출량은 세류확장에 의해 약 4배가 증가하는 것으로 나타났다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.175-183
• /
• 2010

In this study, laboratory experiments are conducted to investigate flow-fields around floating breakwaters by using the LDV(Laser Doppler Velocimetry) system. The LDV system is a well-known equipment to measure fluid particle velocities in laboratory experiments. Although the system requires great efforts and enormous time for measurements, it can provide precise velocity fields comparing to other available equipments. Various types of drafts and shapes for breakwaters are employed in laboratory experiments to analyze a relation between flow-fields and vorticity. A series of numerical experiments are also carried out by using a two-dimensional Navier-Stokes equations model. Numerically predicted results are compared with laboratory measurements.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.55-55
• /
• 2011

연안 및 해안공학의 발달과 더불어 부유식방파제의 기능적 효율성이 중요시 되고 있다. 흔히 사용되어오던 착저식방파제는 설치에 많은 시간과 경비가 소요되고 환경 및 생태계에 많은 변화를 줄 수 있으며, 설치 예정지의 수리학적 특성 등의 여건에 많은 제약을 받는 단점이 있다. 부유식방파제는 일본 등의 선진국을 중심으로 활용이 잦아지고 있는 방파제로서 수면 위에 설치되기 때문에 수중 생태계에 미치는 영향이 적은 친환경방파제이다. 또한 기존에 시공된 중력식방파제와는 달리 수심에 제한을 덜 받고, 공사기간이 짧기 때문에 경제적이다. 실제 시공사례로는 2007년 마산 원전항에 완공된 부유식방파제가 대표적이며, 지금까지도 부유식방파제에 대한 여러 연구자들의 관심이 증가하고 있는 추세이다. 방파제뿐만 아니라 우리나라처럼 국토의 면적이 작은 지역에서 증가하는 해상물동량을 소화하기 위해서 부유식방파제 등을 이용한 항만의 시공이 필요한 실정이다. 이러한 부유식방파제의 분석적인 측면에 있어서 수치해석은 파랑과 구조물의 상호작용을 해석하는 데 한계가 있으며, 부유식방파제 단면형상을 정확하게 재현할 수 없으므로, 수리모형실험을 통한 부유식방파제의 연구가 필요할 것으로 판단된다. 최근 기술의 발달로 인한 유동장 해명이 가능해 졌으며, PIV(Particle image velocimetry) 및 LDV시스템은 다양한 분야에서 응용되고 있다. 특히, LDV시스템은 측정하려는 한 지점에 대하여 레이저 빔을 단면(Cross-section)으로 만들고 입자의 산란광을 후방산란(Back scatter)으로 받아서 도플러 효과를 이용, 속도에 대한 주파수를 획득하며, 유속을 측정하는 장비로 매우 높은 정확도와 비접촉식 이라는 장점을 가지고 있다. 또한, PIV 시스템에 비하여 측정시간이 오래 걸리는 반면 데이터를 가공하지 않고 활용할 만큼 높은 정확성을 가지고 있다. 본 연구에서는 수리모형실험을 통하여 단독형, 2열형 및 3열형 부유식방파제의 형상, 흘수 및 거리를 변화시키며 유동장을 수집하였으며, 방파성능에 따른 와의 생성 및 소멸시점에서의 파랑변형과의 관계를 분석하였다. 방파제의 형상과 흘수를 달리하여 수리모형실험을 수행하였으며, 와류의 상관관계를 분석하였다. 또한, 연직 2차원 Navier-Stokes 방정식 모형을 이용하여 수치모형실험을 수행하였으며, 수치모형실험 결과와 수리모형실험 결과를 비교 분석하였다. 후방방파제에서 발생되는 파랑은 입사파의 주기가 길어질수록 상대적으로 커지는 현상을 보였으며, 흘수심이 깊어질수록 전방방파제 입사 면에서 자유 수면이 높게 관측되는 결과를 보였다. 또한, 비교적 장주기파랑에 해당하는 입사파랑의 경우 전달파고비 산정에 있어서 설계기준인 0.5를 대다수 초과하는 반면, 3열형 구조에서는 대부분이 0.5이하로 상당히 높은 방파성능 결과를 나타내었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.3
• /
• pp.216-223
• /
• 2009

A transverse drag interaction coefficient of the equivalent resistance coefficient formula for square multi-piers higher than water depth and arranged with equal intervals was studied. From the assumption that the energy loss due to drag interaction according to transverse intervals of resistance bodies is essentially identical to the energy loss due to thick orifice according to porosities, the transverse drag interaction coefficient was derived by employing the orifice's energy loss coefficient. The equivalent resistance coefficient formula including the drag interaction coefficient was compared with the numerical experiments using FLOW-3D, the performance of which was verified by Kim et al.(2008) in the experimental condition with the multi-piers. The comparisons showed good agreement and thus, the equivalent resistance coefficient formula, which does not only consider frictional resistance but also consider the multi-piers' drag resistance varied according to the intervals in longitudinal or transverse direction, was verified.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.635-642
• /
• 2008

The influence of unsubmerged resistance bodies in a channel turbulence flow on energy loss was investigated by hydraulic experiments. Square-shaped multi-piers were used for unsubmerged structure or rigid vegetation in an open channel. In experimental channel flows multi-piers were arranged in double or single row along the channel direction, and mean-concept uniform elevations were attained and measured with a set of discharges and channel slopes. Applying the experimental results to the Manning equation, the equivalent resistance coefficient n, which implicates flow resistance and energy loss due to bottom friction as well as drag, was evaluated with varying the interval of piers and the uniform water depth. And the experimentally evaluated n values were compared with the semi-theoretical formula of the equivalent resistance coefficient derived from momentum analysis including a drag interaction coefficient. From the comparisons it was found that the interaction effect of piers on flow resistance was significant for the overall energy losses in a channel flow. The n values decrease when the interval of piers in flow-direction is less than about 2.2 times of the pier width. And it was also found that the n values increase with the 2/3 power of water depth in the theoretical formula, since the drag interaction coefficient was found to be mostly dependent on the interval of piers.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.38-49
• /
• 2006

LNG storage in lined rock cavern demands various techniques concerned with rock mechanics, thermo-mechanics and hydrogeology in design, construction and maintenance stage. LNG pilot cavern was constructed in Daejeon in order to verify these techniques. In this paper, evaluation of drainage system and ice ring formation was studied by numerical simulation. By Modflow analysis in the viewpoint of aquifer and Seep/W analysis in the viewpoint of flow system, it was verified that the drainage system in the pilot cavern was efficiently operated. Since ice ring formation can be simulated by interactive relation between heat transfer and water flow, coupled analysis of those was performed. In this analysis, the position of ice ring was presumed and it was demonstrated that the formation is affected by velocity and direction of groundwater flow.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.337-341
• /
• 2006

The quality characteristics of a surimi-based product with sea tangle single cell detritus (SCD) were studied in order to utilize SCD from sea tangle as a food additive. Mixture design and regression models were applied to optimize the processing conditions and to investigate the interaction between surimi and the other ingredients. Surimi and SCD decreased hardness and cohesiveness of surimi gels, and then increased them. Water increased hardness and then decreased it, whereas cohesiveness was reversed. Surimi and water increased gumminess and brittleness of surimi gels, but SCD decreased them. SCD increased water retention ability (WRA) and whiteness of surimi gels, whereas water decreased it. Hardness and cohesiveness fitted nonlinear models by ANOVA, but gumminess, brittleness, WRA and whiteness fitted linear models. The response constraint coefficient showed that surimi influenced hardness and whitenessmore than water and SCD, whereas water influenced WRA more than surimi and SCD. Moreover, SCD influenced cohesiveness, gumminess and brittleness more than surimi and water. Hardness and cohesiveness fitted nonlinear models with interaction terms for surimi-SCD and surimi-water, respectively. Optimum mixed ratio values of surimi, water, and SCD were 36.80, 57.07 and 4.14%, respectively, by mixture model.