• Title/Summary/Keyword: 수리모델링 분석

Search Result 200, Processing Time 0.034 seconds

Identifying Three-Dimensional Hydraulic Characteristics of the Sea Region Under Combined Tidal Current and Shock Waves (조류와 충격파가 혼재한 해역의 3차원적 수리특성 분석)

  • Kang, Min Goo
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.4B
    • /
    • pp.339-346
    • /
    • 2009
  • In this study, the flow characteristics of the sea region, where tidal current and shock waves are combined, are identified using a three-dimensional numerical model (Princeton Ocean Model, POM). The model is adopted and applied for simulating the flows of the sea region near the open sections during the seadike closure work of Sihwa Seadike which was closed in 1994. The simulation results show that the shock waves with high velocities propagate through the sections toward the inside and outside of the seadike during the periods of the spring and ebb tides, respectively. It is found that the phenomena of flow separation occur near the shock waves; as the shock waves extend to wider zones after passing the sections, their effects on the tidal current become weak. In addition, the longitudinal velocity profiles of the flows are revealed to be affected by the shock waves. For all the simulations, at the ebb tide, the drawdown of the water levels occurs in front of the open section, respectively, especially, hydraulic jump occurs when simulating the case of maximum difference in water level between the inside and outside of the seadike. As a result, it is thought that the flow characteristics of the sea region dominated by shock waves need to be identified employing three-dimensional analysis approach, which is expected to provide the information for ocean engineering works and facility management.

Comparative Analysis of Infiltration for Estimating Subsurface Runoff (지표하유출 산정을 위한 침투량의 비교분석)

  • Lee, Jae-Joon;Lee, Sung-Ho
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.540-540
    • /
    • 2012
  • 강우 발생시 유역에 집수된 물이 하천에 이르는 경로에 따른 유출은 지표유출, 지표하유출, 지하수유출로 구분된다. 정확한 수문순환 과정의 해석을 위해서는 지표 흐름뿐만 아니라 지표하 및 지하수 흐름의 해석이 중요한 실정이나 일반적으로 실무에서 사용되는 강우-유출해석 모형은 지표유출을 해석하기 위한 모형이 대부분이며, 지표하 유출과 침투량을 산정하는데 어려움이 있다. 일반적인 강우-유출해석 모형은 Horton 방법, NRCS 방법, Green-Ampt 방법에 의해 유효우량을 분리하며, 이 과정은 침투량을 직접적으로 모형화 할 수 없으므로 지표 및 지표하, 지하수 흐름을 복합적으로 해석할 수 있는 모형이 질적이나 양적으로 부족한 실정이다. 이러한 지표하 흐름과 침투량을 산정하기 위하여 FE-FLOW, PM, MS-VMS, GMS, GW-VISTAS, ARGUS 및 MODFLOW와 같은 지하수 모형을 사용하고 있다. 본 연구에서는 지표하유출 산정을 위한 침투량의 비교분석을 위해 현재 가장 범용되는 지하수 유동 모델링 프로그램인 Visual Modlfow 모형과 GMS 모형을 이용하여 침투량 산정을 위한 수치 모의를 진행하였다. 각 모형의 입력자료는 2009년 국립방재연구원에서 수행한 침투실험시설 자료를 이용하여 동일한 조건을 부여하고, 두 모형의 비교를 위해 Visual Modflow에서는 MODFLOW의 기본 해석방법인 유한차분법(FDM)을 이용하고, GMS 모형에서는 3차원 유한요소해석이 가능한 GMS-FEMWATER를 이용하였다. 두 모형의 수치모의 조건으로 2009년 국립방재연구원에서 수행한 침투실험방법과 동일하게 공극률에 따른 투수성 보도블럭의 구분과 50mm/hr, 100mm/hr, 150mm/hr, 200mm/hr의 강우강도별 선행함수조건에 따른 수치모의를 진행하였으며, 수치모의된 침투량의 적정성을 판단하기 위하여 국립방재연구원의 침투실험 결과자료와 비교분석하였다. 침투실험 자료와 각각 수치모의된 침투량을 비교분석한 결과 서로 유사한 경향을 보이고 있으나 초기 침투시 상대오차가 비교적 크게 발생하였다. 이는 수치모형의 경우 수리실험과는 다르게 모의시작과 동시에 해당 강우강도의 침투가 시작되므로 초기 유입 유출량 발생시간의 차이가 종료시간까지 누적 침투량에 미치는 것으로 판단되며, 매개변수에 많은 영향을 받는 것으로 판단된다.

  • PDF

Sedimentological and Hydromechanical Characteristics of Bed Deposits for the Cultivation of Manila clam, Ruditapes philippinarum in Gomso Tidal Flat (곰소만 조간대 바지락 양식장 저질의 퇴적학적 및 수리역학적 특성)

  • CHO Tae-Chin;LEE Sang-Bae;KIM Suck-Yun
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.34 no.3
    • /
    • pp.245-253
    • /
    • 2001
  • To investigate the effects of hydromechanical and textural characteristics of sediment deposits on the cultivation of Manila clam, Ruditapes philippinarum surface and sub-surface core sediments were collected seasonally in Gomso tidal flat. Grain size distribution were analyzed to investigate the annual variation of sediment texture. In winter unimodal distribution of grain size with the peak at $5\phi$ is dominant However, during the summer sediment texture become a little bit coarser and grain size distribution shows the peaks at $4\~5 \phi$. Optimum sediment texture for the cultivation of manila clam, R. philippinarum was found to be sandy silt in which mean Brain size was between 4 and $5 \phi$ with the sand content less than $50\%$ and clay content of $5\~10\%$. Mechanical and hydrological characteristics of sediment deposits were also studied in the laboratory and the results were applied to the numerical simulation for the behavior of surface sediment subjected to the cyclic loading from sea-water level change. Results of numerical simulation illustrate that the permeability of sediment had to be maintained in the range of $10^{-11}\sim10^{-12}m^2$ to ensure the proper sedimentological environment for the cultivation of manila clam, R. philippinarum. The deposits of virtually impermeable mud layer, with the threshold thickness of 4 cm, would be very hazardous to clam habitat.

  • PDF

Approximate Performance Analysis of an N-design Call Center by the Decomposition Method (분할방식에 의한 N-설계 콜센터의 근사 성능분석)

  • Park, Chul-Geun;Sung, Soo-Hak;Chung, Hae
    • Journal of Korea Multimedia Society
    • /
    • v.12 no.1
    • /
    • pp.31-40
    • /
    • 2009
  • Call centers have become the prevalent contact points between companies and their customers. By virtue of recent advances in communication technology, the number and size of call centers have grown dramatically. As a large portion of the operating costs are related to the labor costs, efficient design and workforce staffing are crucial for the economic success of call centers. Therefore it is very important to determine the adequate number of agents. In this context, the workforce staffing level can be modeled as mathematical optimization problem using queueing theory. In this paper, we deal with an approximate analysis of an N-design call center with two finite queues and two types of reneging customers by using the state decomposition method. We also represent some numerical examples and show the impact of the system parameters on the performance measures of the call center.

  • PDF

A Study on the Prediction of Water-Temperature near the Confluence of Banbyeoncheon by Using the KU-RLMS Model (KU-RUMS 모형을 이용한 반변천 합류부 수온 예측에 관한 연구 KU-RLMS)

  • Lee, Yong-Chin;Lee, Nam-Joo;Lyu, Si-Wan;Yeo, Hong-Koo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1219-1223
    • /
    • 2007
  • 수온은 수계에서 가장 중요한 물리적 특성 중 하나로서, 생물 군집, 특히 어류와 무척추 동물에 관련된 많은 수질 인자에 영향을 미친다. 하천의 생태학적 모습을 개선하기 위한 하천 복원 사업 수행에 있어서, 서식처 및 산란처 조건으로서의 수온 조사 및 모델링의 필요성이 점차 증가하고 있는 상황이다. 본 연구는 낙동강의 중상류에 위치한 반변천 합류부에 평면 이차원 비정상 수치모형인 KU-RLMS 모형을 적용하여 수온의 변화 특성을 규명할 목적으로 수행하였다. KU-RLMS 모형은 하천 및 저수지의 국부적인 수리, 수질, 유사이동 해석을 위해 개발된 평면 이차원 비정상 수치모형이다. 직사각형 격자를 사용하는 유한차분법의 단점을 보완하기 위해, 수심적분된 2차원 연속방정식, 운동량방정식, 이송확산방정식을 불규칙한 경계를 현실적으로 모사할 수 있는 직교곡선 좌표계로 변환한 방정식을 사용한다. 이 모형은 흐름, 농도, 지형변화를 조합하여 계산할 수 있는 모형으로서 점착성 및 비점착성 유사의 이동, 보존성 및 비보존성 오염물질의 이동, 수온 변화를 모의할 수 있다. 수치모형 적용을 위한 현황분석으로 안동 및 임하 조정지댐의 방류량, 안동 수위관측소의 수위, 법흥교 및 포진교 지점의 수온 자료를 분석하였다. 이송확산모형의 보정을 위해, 안동대교 지점의 수온 횡분포 측정자료를 사용하여 확산계수에 대한 매개변수 추정 및 검증을 수행하였다. 또한, 안동조정지댐과 임하조정지댐의 방류량 및 방류수온을 고려하여 수치모의조건을 결정하였으며, 각 조건에 대한 수온 변화 특성을 분석하였다.

  • PDF

Effect of Major Tributaries Water Quality Improvement in the Geum River Area, Korea using EFDC Model (EFDC 모델을 이용한 금강 주요 지류의 수질개선 효과)

  • Kim, Jin soo;Kim, Ja young;Seo, Dong il
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.266-266
    • /
    • 2019
  • 금강의 주요 지류인 미호천과 갑천은 대전광역시와 청주시가 위치하고 있으며, 두 도시지역에서 유입되는 오염물질로 인하여 금강 본류에 높은 오염부하를 제공하고 있다. 따라서 본 연구에서는 3차원 수리동역학 모델인 EFDC 모델을 사용하여 미호천과 갑천의 수질개선이 금강의 수질에 미치는 효과를 분석하였다. 대상유역은 대청댐부터 백제보 까지 70km 구간이며, 모델의 격자는 Curvilinear-Orthogonal Coordinate를 사용하였으며 횡단방향 8개로 분할하여 총 6,698개의 격자로 구성하였다. 경계조건구성 및 모델의 보정은 국가정보 포털인 수자원관리종합정보시스템(WAMIS), 물환경정보시스템(WEIS), 국가기후데이터센터(data,kma,go,kr) 등에서 제공하는 유량, 수질, 기상 등 데이터를 활용하였으며, 모의 기간은 2017년이다. 수질의 보정은 대상유역 내 6곳의 수질 측정 지점에서 수행되었으며, 적합성 평가를 위해 R-square와 NSE(Nash-Sutcliffe Efficiency) 두 가지의 통계 지표를 활용하였다. 수질의 경우 TN, TP, TOC, Chl-a 순으로 평균 R-square값은 0.75, 0.51, 0.36, 0.57이고 평균 NSE (Nash-Sutcliffe Efficiency)값은 0.59, -0.18, -1.10, 0.27으로 모의 값과 실측값 사이의 상관관계는 TN에서 가장 높았으며 반대로 TOC는 가장 낮았다. 모의결과가 실측값을 정확히 반영하지는 못했지만, 수질의 평균적인 현상은 반영한 것으로 판단된다. 두 주요 지류의 수질이 동시에 15% 또는 30% 개선되었을 경우를 모의하여 금강 본류의 수질변화를 6곳의 수질 측정 지점에서의 실측값과 비교하여 분석하였다. 두 지류가 동시에 15%의 수질 개선 시에는 금강 본류 수질은 TN, TP, TOC, Chl-a 순으로 평균 11.80%, 7.90%, 8.63%, 7.04%의 개선되었으며, 30% 수질 개선 시에는 평균 23.66%, 15.92%, 17.36%, 14.26%의 개선되었다. 각 지점에서 고른 개선이 확인되었으며, 개선 효과는 TN이 가장 컸고, 반대로 Chl-a가 가장 적었다. 갑천과 미호천의 수질이 별개로 개선되었을 경우를 모의한 결과, 미호천의 개선이 갑천에 비해 금강의 수질 개선에 영향이 컸다. 이는 두 지류의 수질 농도는 비슷하나 갑천에 비해 유량이 많은 미호천의 오염 부하량이 높은 것으로 분석된다. 연구 결과 금강의 수질을 개선하기 위해서는 두 지류의 수질 개선이 필수적인 것으로 판단된다. 금강의 TN 농도는 두 지류의 영향이 가장 컸으며, 개선 효과는 Chl-a에서 가장 적었다. 또한 갑천에 비해 미호천이 금강 수질에 영향이 큼을 확인하였다.

  • PDF

Environmental flow evaluation considering river ecosystem's ecological habitat condition (하천 생태계의 서식조건을 고려한 환경유량의 정량적 평가)

  • Na, Jong-Moon;Cho, Yean-Wha;Park, Seo-Yeon;Lee, Joo-Heon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.144-144
    • /
    • 2020
  • 국내의 하천은 급격한 도시화 및 산업화로 인해 자연하천의 모습은 사라지고 이수와 치수 기능 위주의 하천관리가 이루어졌다. 하천은 치수기능을 강조하여 인공적으로 변화하였을 뿐만 아니라 하천생태환경 내에 서식하는 동식물의 서식 환경에도 교란을 야기하였다. 최근 하천관리의 패러다임이 변화함에 따라서, 하천이 갖는 자연적 특성을 회복하는 환경적 측면을 강조한 생태하천 복원사업에 대한 관심이 높아지고 있으나, 수생생물 서식지 복원과 생태계에 필요한 환경유량에 관한 정량적인 평가를 위한 연구는 부족한 실정이다. 본 연구는 경상북도 김천시와 구미시를 관류하여 낙동강으로 합류되는 감천을 대상으로 하였으며, 댐 건설로 인한 하천 생태계 변화 및 하천유량에 대한 통계적 분석, 수리 모델링, 하천구역의 공간적 분석을 진행하였다. 통계적 분석을 위한 시계열 자료 구축은 감천 하류에 있는 선산관측소의 2002년 ~ 2019년까지 수위, 유량을 사용하였으며, 김천부항댐이 건설 된 2014년 1월 1일을 기점으로 댐 건설 전(2002 ~ 2013)과 댐 건설 후(2014 ~ 2019)로 구분하였다. HEC-EFM(Ecosystem Function Model)을 활용하여 어류를 포함한 수생생물의 성공적인 서식을 위한 환경유량을 산정하였다. 산정된 환경유량을 HEC-GeoRAS(Geographic River Analysis System)와 HEC-GeoEFM(Geographic Ecosystem Function Model)을 적용·연계하여 수생식생 도입이 가능한 하천 구간과 어류 산란 및 성장에 적합한 하천구간을 표현하였으며, 댐 건설 전후의 서식지 면적을 계산하여 수생생물의 성공적인 서식환경이 조성되었는지 확인하였다. 본 연구를 바탕으로 수생생물의 하천 서식지 개선을 위한 명확한 환경유량을 수립하는 데 도움이 될 것으로 판단된다.

  • PDF

Water Quality Modelling of Daechung Lake - Effect of Yongdam Dam (용담댐의 영향분석을 위한 대청호 수질모델링)

  • Seo, Dong-Il;Lee, Eun-Hyoung
    • Journal of Korea Water Resources Association
    • /
    • v.35 no.6
    • /
    • pp.737-751
    • /
    • 2002
  • Water quality in Daechung Lake was predicted for various discharge conditions of Yongdam dam. The same scenarios were applied as in the previous paper by the authors for Keum River water quality modeling. Effects in water quality due to changes in discharge conditions from Yongdam Dam were less distinct to the Daechung Lake than to the inflowing Keum River due to sink processes in the lake. For the minimum flow year, it is appropriate to maintain Yongdam dam discharge rate to 8.9 $m^3$/sec considering the current field conditions and future predictions of TN and TP concentrations of Yongdam dam. Effect of Yongdam dam discharge conditions to the Daechung Lake water quality were stronger for drier years. However it should be noted that the effects were dependent upon the water quality of Yongdam discharge at the same time. Therefore, water quality management effort should be emphasized before the discussion over the discharge volume of Yongdam dam. The input data sets for simulations in this study were formulated using the available data and assumptions based on authors experiences for the fields. Therefore, continued data collection effort will ensure the validity of this study.

Estimating Groundwater Level Variation due to the Construction of a Large Borrow Site using MODFLOW Numerical Modeling (대규모 토취장 개발 예정 지역의 수치모델을 이용한 지하수위 변동 예측)

  • Ryu, Sanghun;Park, Joonhyeong;Kim, Gyoobum
    • Journal of the Korean GEO-environmental Society
    • /
    • v.13 no.10
    • /
    • pp.15-23
    • /
    • 2012
  • A numerical model and field monitoring data are used to estimate a change in groundwater level at a borrow site, which will be constructed at the mountainous area with a large ground excavation in the study area, Hwaseong city. Lithologic data and hydraulic coefficients are collected at 9 boreholes and also groundwater levels are measured at these boreholes and existing wells in the study area. Additionally, groundwater recharge rate for the type of land cover is estimated using water budget analysis; 133.34mm/year for a mountainous area, 157.68mm/year for a farming area, 71.08mm/year for an urbanized area, and 26.06mm/year for a bedrock exposure area. The change in groundwater level in and around a borrow site is simulated with Modflow using these data. The result of a transient model indicates that a removal of high ground (over 40El.m) by an excavation will produce a decrease in groundwater levels, up to 1 m, around a borrow site in 10 years. It also explains that this ground excavation will bring about the decreases of 9.4% and 7.0% for groundwater recharge and surface runoff, respectively, which are the factors causing groundwater level's change. This study shows that it is required to construct the groundwater monitoring wells to observe the change of groundwater near a borrow site.

A Method of Developing a Ground Layer with Risk of Ground Subsidence based on the 3D Ground Modeling (3차원 지반모델링 기반의 지반함몰 위험 지반 레이어 개발 방법)

  • Kang, Junggoo;Kang, Jaemo;Parh, Junhwan;Mun, Duhwan
    • Journal of the Korean GEO-environmental Society
    • /
    • v.22 no.12
    • /
    • pp.33-40
    • /
    • 2021
  • The deterioration of underground facilities, disturbance of the ground due to underground development activities, and changes in ground water can cause ground subsidence accidents in the urban areas. The investigation on the geotechnical and hydraulic factors affecting the ground subsidence accident is very significant to predict the ground subsidence risk in advance. In this study, an analysis DB was constructed through 3D ground modeling to utilize the currently operating geotechnical survey information DB and ground water behavior information for risk prediction. Additionally, using these results, the relationship between the actual ground subsidence occurrence history and ground conditions and ground water level changes was confirmed. Furthermore, the methodology used to visualize the risk of ground subsidence was presented by reconstructing the engineering characteristics of the soil presented according to the Unified Soil Classification System (USCS) in the existing geotechnical survey information into the internal erosion sensitivity of the soil, Based on the result, it was confirmed that the ground in the area where the ground subsidence occurred consists of more than 40% of sand (SM, SC, SP, SW) vulnerable to internal erosion. In addition, the effect of the occurrence frequency of ground subsidence due to the change in ground water level is also confirmed.