• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.05a
• /
• pp.410-411
• /
• 2000

연안 매립을 포함하는 방파제의 건설이나 호안의 축조는 자연적인 해류의 흐름을 방해하는 인위적 교란으로서 그에 따른 수력학적 변화에 의해 퇴적학적 특성은 물론 지형학적 변화를 유발하게 된다. 이러한 물리적 환경의 변화가 저서생물의 유생의 분포. 먹이 입자의 퇴적작용, 그리고 퇴적상의 변화를 초래하고 결국 저서동물군집의 구조에 변화를 주게 된다(Seys et al., 1994). (중략)

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.219-225
• /
• 2016

This study was conducted to investigate the amount of fat, vitamins and minerals in milk can be affected by hydrodynamic cavitation since cavitation is recently focused on as one of the sterilization methods. Vitamins (vitamin A, $B_2$), minerals (Ca, P, Mg, Zn) and fat contents were measured according to Ministry of Food and Drug Safety's Processing Standards and Component Specifications of Animal Product. Vitamin A & $B_2$ contents decreased approximately 23% & 19%, respectively after cavitation. Minerals content showed no change after cavitation. Also, P and Mg contents were reduced after cavitation to 2 mg/100g and 0.1 mg/100g, showing no change. Milk fat content was 3.46% before cavitation and 3.41% after cavitation, displaying no difference. Hydrodynamic cavitation process displays a possibility to replace existing pasteurizing method, as it does not change vitamin or mineral contents in milk. Therefore, a more clear and systematic research on hydrodynamic cavitation pasteurization is needed to distribute excellent quality milk and to emphasize physiochemical properties and quality change of existing heat pasteurization process.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.224-228
• /
• 2005

Dynamic control tests for Backhole as a dynamic damper were performed. For the forced oscillation generated by pressure drop in the feed line and internal wave analysis of swirl injector, hydrodynamic pulsator and 1D visualization model injector was produced, respectively We focus on effect of Backhole as a dynamic damper instead of a acoustic one. So, the breakup length and film thickness of liquid sheet on the steady state and the forced oscillation state have been measured and compared.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.363-368
• /
• 1998

영광 5,6호기 유출계통의 과도현상을 평가하기 위해서 Electric Power Research Institute (EPRI)에서 개발한 발전소 과도해석용 코드인 Modular Modeling System-Real Time Capable (MMS-RTC) 코드를 이용하여 유출계통의 모델을 구성하였다. 구성된 모델을 이용하여 수력학적 현상을 모사하고 배압제어벨브 제어기의 제어변수 및 유출 오리피스 차단벨브의 Stroke Time 등의 운전특성을 고려하여 수력학적 현상을 분석하였다. 분석결과 배압제어벨브 제어기 제어변수의 적절한 선정이 계통의 과도현상 완화에 매우 중요한 인자임을 알 수 있었고, 유출 오리피스차단벨브의 Stroke Time의 변화가 유출계통의 과도현상에 상당한 영향을 미치고 있음을 알았다. 결과적으로 유출계통의 과도상태를 적절하게 제어하기 위해서는 벨브의 특성, 벨브의 Stroke Time 및 배압제어밸브 제어기 제어변수들이 적절히 선정하여야 한다고 판단된다.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.451-464
• /
• 2008

Three-phase inverse fluidized bed has been widely adopted with its increasing demand in the fields of bioreactor, fermentation process, wastewater treatment process, absorption and adsorption processes, where the fluidized or suspended particles are small or lower density comparing with that of continuous liquid phase, since the particles are frequently substrate, contacting medium or catalyst carrier. However, there has been little attention on the three-phase inverse fluidized beds even on the hydrodynamics. Needless to say, the information on the hydrodynamics and transport phenomena such as heat and mass transfer in the inverse fluidized beds has been essential for the operation, design and scale-up of various reactors and processes which are employing the three-phase inverse beds. In the present article, thus, the information on the three-phase inverse fluidized beds has been summarized and reorganized to suggest a pre-requisite knowledge for the field work in a sense of engineering point of view. The article is composed of three parts; hydrodynamics, heat and mass transfer characteristics of three-phase inverse fluidized beds. Effects of operating variables on the phase holdup, bubble properties and particle fluctuating frequency and dispersion were discussed in the section of hydrodynamics; effects of operating variables on the heat transfer coefficient and on the heat transfer model were discussed in the section of heat transfer characteristics ; and in the section of mass transfer characteristics, effects of operating variables on the liquid axial dispersion and volumetric liquid phase mass transfer coefficient were examined. In each section, correlations to predict the hydrodynamic characteristics such as minimum fluidization velocity, phase holdup, bubble properties and particle fluctuating frequency and dispersion and heat and mass transfer coefficients were suggested. And finally suggestions have been made for the future study for the application of three-phase inverse fluidized bed in several available fields to meet the increasing demands of this system.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.481-482
• /
• 2001

연안 이용을 목적으로 건설되는 방파제 혹은 호안의 건설은 해류의 자연적인 흐름을 인위적으로 방해함으로서 해역의 수력학적 조건을 변화시키고, 그에 따른 저질 퇴적물 조성 및 대기노출 시간의 변화는 결과적으로 갯벌에 서식하는 해양저서동물의 번식과 섭식, 그리고 사망에 영향을 미친다 (hummel et al., 1994). 시화호는 1994년 1월 물막이 공사가 완료된 이후 1996년까지 완전히 폐쇄된 해역으로 유지되면서 내부에 분포하는 갯벌이 상당부분 훼손되었다. (중략)

• Journal of ILASS-Korea
• /
• v.9 no.2
• /
• pp.41-49
• /
• 2004

Liquid breakup under the variation of AC frequency has been studied experimentally in the electrohydrodynamic atomization. The effect of parameters such as charging voltage, flow rate, nozzle tip inner diameter and power frequency have been considered. This work was performed to investigate the experimental analysis for the effect of AC frequency on breakup process, the mapping of occurrence of disintegration region, and the relationship between the applied power and the droplet radius. The experimental results show that the increase of applied voltage in a certain frequency band leads to a reduction in the droplet size within the limits from 50Hz to 400Hz. The transition phenomena from dripping mode to spindle mode were observed under the band of sudden fall of droplet radius changing ratio, and the synchronous region were produced within the range of applied voltage from 5kV to 6kV.

• Journal of ILASS-Korea
• /
• v.8 no.2
• /
• pp.24-30
• /
• 2003

An experimental study was performed to investigate the influence factors of drop formation in electrohydrodynamic atomization. The mode of electrohydrodynamic atomization depended on the various factors such as the flow rate of the liquid, the inner diameter of the nozzle, the distance between the nozzle tip and the ground electrode, the shape of the ground electrode. and the applied high voltage. This work was performed to investigate the experimental analysis for the flow pattern visualization of droplets, and the relationship between voltage application and the behavior of liquid atomization. Uniform drops of different sizes can be obtained at the inception of the spindle mode by charging the flow rate and the electric field. The drop size also decreased when the flow rate was raised for the spindle mode. The whipping motion occurred beyond 7kV and before the corona started to take effect.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.790-797
• /
• 2011

Hydrodynamic similarity was analyzed by employing scaling factor in three phase fluidized beds. The scaling factor was defined based on the holdups of gas, liquid and solid particles and effectivity volumetric flux of fluids between the two kinds of fluidized beds with different column diameter. The column diameter of one was 0.102 m and that of the other was 0.152 m. Filtered compressed air, tap water and glass bead of which density was 2,500 kg/$m^3$ were used as gas, liquid and solid phases, respectively. The individual phase holdups in three phase fluidized beds were determined by means of static pressure drop method. Effects of gas and liquid velocities and particle size on the scaling factors based on the holdups of each phase and effective volumetric flux of fluids were examined. The deviation of gas holdup between the two kinds of three phase fluidized beds decreased with increasing gas or liquid velocity but increased with increasing fluidized particle size. The deviation of liquid holdup between the two fluidized beds decreased with increasing gas or liquid velocity or size of fluidized solid particles. The deviation of solid holdup between the two fluidized beds increased with increasing gas velocity or particle size, however, decreased with increasing liquid velocity. The deviation of effective volumetric flux of fluids between the two fluidized beds decreased with increasing gas velocity or particle size, but increased with increasing liquid velocity. The scaling factor, which was defined in this study, could be effectively used to analyze the hydrodynamic similarity in three phase fluidized processes.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.236-241
• /
• 1996

울진 3,4호기 유출관계통의 과도현상을 평가하기 위해서 발전소 과도해석용 코드인 Modular Modeling System(MMS) 코드를 이용하여 수력학적 현상을 모사하고 유출관제어밸브 및 배압제어밸브의 특성, 이들 밸브들의 제어특성 및 밸브들의 운전특성등을 고려하여 분석을 수행하였다. 분석결과 배압제어밸브 제어기 제어변수의 적절한 선정이 계통의 과도현상에 매우 큰 영향을 미치고 있기 때문에 배압제어기 제어변수 선정이 계통의 과도현상 완화에 매우 중요한 인자임을 알 수 있었고, 배압제어밸브의 Stroke 속도변화가 유출관계통의 과도현상에 상당한 영향을 미치고 있음을 알았다. 또한 배압제어밸브의 특성에 따른 유출관계통의 과도현상을 분석한 결과 유출관제어밸브의 운전에 따라 배압제어밸브 특성이 결정됨을 알았다. 결과적으로 유출관계통의 과도상대를 적절하게 제어하기 위해서는 밸브의 특성, 밸브의 Stroke 속도 및 배압제어벨브 제어기 제어변수등의 적절한 선정이 필수적으로 계통설계단계에서 고려되어야 한다고 판단된다.