• Fire Science and Engineering
• /
• v.25 no.4
• /
• pp.103-109
• /
• 2011

In this study, we calculated the smoke movement at the fire area of the refuge floor which has the refuge safety area in case of fire in the high rise building by using a computational fluid dynamics (CFD) code of FLUENT (ver. 13.0). The buoyancy plume was applied using the temperature and flow velocity which represent 10 MW heat release rate in order to describe the fire, and the smoke movement was predicted using a species conservation equation. The pressurization system of smoke control was adopted with smoke control damper in refuge safety area, at the result, it is confirmed that the damper capacity was enough to smoke control in which the flow rate of supply was applied 25 $m^3/s$ in the case of the door at fire area opened only, and 50 $m^3/s$ in the doors at the fire area and lobby both opened case. They were satisfied in NFSC 501-A. Even though the door of fire area closed, there were smoke leakages at the gap between the door and wall. In addition, the refugee could be isolated in the fire area when the door of fire area closed during smoke control in the case of using the high damper flow rate of supply, 50 $m^3/s$. Therefore the proper damper flow rate of supply are needed in order to prevent the damage of refugee and this study proposes the suitable condition of damper capacity according to refuge scenario.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1953-1955
• /
• 2006

500[MW]급 대용량 보일러 통풍계통의 송풍기 맥동 감시 장치는 송풍기 이상 발생시 송풍기를 보호하기 위하여 정지시키는 기능을 한다. 그러나 송풍기 맥동 감시 장치의 빈번한 고장으로 신뢰성이 저하되고 운전에 영향을 미치므로 이것을 DCS 로직으로 구성하여 신뢰성을 향상시켰다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.355-361
• /
• 2002

본 연구에서는 원적외선.열풍 복합건조특성을 구명하기 위하여 건조용량 150-500kg이고, 승강기, 상.하부스크류, 건조실, 템퍼링실, 송풍기 및 가열장치로 구성된 시뮬레이터를 제작하여 건조특성시험을 실시하였다. 그 결과를 요약하면 다음과 같다. 가. 열풍온도에 따른 곡온변화를 시험한 결과 열풍온도 45$^{\circ}C$일 때 곡온 32-33$^{\circ}C$를 유지하였으며, 48, 51$^{\circ}C$일 때는 곡온이 35$^{\circ}C$가 넘어서는 현상을 나타났다. 건조중 곡온이 35$^{\circ}C$를 넘어서게 되면 동할미 발생량이 많아지고 품질저하가 급격히 일어난다. 나. 템퍼링실의 온도편차가 2,5$^{\circ}C$ 정도로 고른 온도분포를 나타내었고, 버너 입구쪽과 템퍼링실 중앙지점에서 온도가 약간 높게 나타났으며, 원적외선방사체 표면온도분포는 열풍온도가 45$^{\circ}C$일 때 평균 17$0^{\circ}C$를 유지하였고, 48$^{\circ}C$, 51$^{\circ}C$일 때 각각 22$0^{\circ}C$, 23$0^{\circ}C$에서 유지하는 것으로 나타났다. 다. 원적외선방사체 길이방향으로 온도편차는 버너를 기준으로 해서 버너쪽에서 멀수록 온도가 높았고, 중간, 근거리 순으로 나타났다. 버너의 원거리쪽에서 온도가 높게 나타난 것은 원적외선방사체를 통과하는 열풍이 빠져나가도록 되어있는 열풍 유동관이 버너 원거리에 위치하고 있어 버너에 불꽃이 점화되면서 열풍이 방사체 끝쪽으로 일시 머물렀다가 배출되기 때문으로 판단된다. 라. 건조기의 송풍량을 요인으로 하여 건조속도와 건조에너지를 비교한 결과 송풍량이 30cmm일 때가 25cmm에서보다 약 33%의 건조속도가 증가되어 송풍량이 많을수록 건조속도가 빨라졌으나, 건조에너지는 1,391kcal/kg.water로 나타나 약 4.2%정도가 더 소요 되었다. 곡물순환속도를 요인으로 하여 비교 시험한 결과 곡물순환속도가 33kg/min일때가 26kg/min보다 약 25%의 건조속도가 증가되어 곡물의 순환속도가 빠를수록 건조속도가 빨라졌으며, 건조에너지도 1,334kcal/kg.water로 비슷하게 소요되었다. 마. 시험구와 대비구의 건감률은 시험구에서 1.08~1.36w.b./h로 나타나 대비구보다 약 9.9~18.3%가 높게 나타났고, 건조에너지는 10.2~14.6%가 절감되었다. 발아율은 열풍온도가 낮을수록 높게 나타났고 시험구가 대비구보다 발아율이 낮게 나타났으며, 동할률 증가량도 원적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.

• Plant Journal
• /
• v.8 no.4
• /
• pp.34-39
• /
• 2012

This study presents how low quality coal combustion affects the desulfurizer draft system by correlating of draft loss in a coal-fired thermal power plant and predicts the stall occurrence time of a booster fan. In case of low quality coal, a lot of coal is needed to generate equivalent output power, thereby the rating of increasing draft loss was faster than designed amount of coal. We surely confirmed that draft loss affects the specific energy of a booster fan strongly. On this basis, it is possible to predict the occurring time of stall for a booster fan from current operation specific energy to stall limit specific energy. This study suggests increasing speed of draft loss in each caloric value and the impact of specific energy at a booster fan, it expects to help safe operating in a thermal power plant.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 1995.12a
• /
• pp.17.2-18
• /
• 1995

• Journal of Animal Environmental Science
• /
• v.9 no.2
• /
• pp.79-84
• /
• 2003

1.퇴비 온도의 상승에 비례하여 폐사계 체내의 온도도 상승하여 퇴적식 퇴비단의 경우 $55^{\circ}C$내외의 고온지속기간이 약 30일정도 유지되었다. 반면에 토양 중에 매립된 폐사계의 체내 온도는 발효 전 기간 동안 $30^{\circ}C$ 이상으로 상승하지 못한 채 주변토양 온도와 거의 비슷한 수준을 유지하였다. 토양온도는 외기온의 변화에 즉각적인 반응을 보이지 않았다. 2. 시험용 발효조 내에서의 송풍여부에 따른 퇴비의 발효온도 변화추이는 송풍 처리구에서는 퇴비화 3일째에 최고온도 $68^{\circ}C$를 기록한 반면에 무송풍구에서는 퇴비화 5일째에 최고온도 $72^{\circ}C$를 기록하였다. 3. 퇴비단 표층에서 채취된 시료에서 검출된 $H_2S$와 $CH_3$SH 농도는 송풍 처리구에 있어서는 퇴비화 개시 후 20일 경과 후 각 각 28.5, 16.0 ppb 수준을 나타냈고 35일 경과 시에는 각각 57.7, 11.7 ppb, $CH_3SH$의 경우에는 23.7, 9.9 ppb 수준의 발생량을 기록하는 등 전반적으로 송풍처리구가 무송풍 처리구에 비해 악취가스의 발생량이 상대적으로 낮았다. 4. 폐사계를 밀폐용기 내에서 발표 시 수거된 침출수 중의 미생물 수가 토양매립 상태 하에서 수거된 침출수 중의 미생물 수보다 더 적은 경향을 보이고 있다. 5. 퇴비단 내에서 발효에 따른 폐사계 중량은 최초 3일간에 급격히 감소하고 시간의 경과에 따라 그 감소속도는 줄어든다. 발효온도가 높을수록 조직의 분해속도가 빨라지고 폐사계의 중량감소 속도도 빨라졌다. 6. 일반 퇴비와 폐사계를 발효시킨 퇴비 사이에 비료성분과 중금속 함량의 유의적인 차이는 발견되지 않았다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.27-34
• /
• 1985

Pig manure mixed with straw, sawdust, packing paper and chaff was composted in a batch type enclosed composter without regular mixing for 1 week. The maximum decomposition was obtained in the temperature of $70^{\circ}C$ with an initial moisture content of 50 to 65 %, initial pH of 7 to 8, 0.7 to $2.0l/min{\cdot}kg$ per volatile matter of air supplied and C/N ratio of 60 to 70. The maximum carbon dioxide content in the produced gas was 65 to 85 mg/hr-vm at 45 to $53^{\circ}C$.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.592-603
• /
• 2019

This study is about the implementation of low energy sewage management technology through effective control of blower which consumes the most energy in sewage treatment. In calculating the amount of oxygen required for microorganisms, unlike the existing method using the operating index in the bioreactor or TMS data in the discharge port, the CODcr and NH₄⁺-N concentration changes in sewage flowing into the sewage treatment plant were detected in advance before entering the bioreactor and the amount of air was controlled based on this. The pre-sensing was found to have a high correlation compared with conventional products. As a result of blower control, it was possible to save about 9.9% energy more than the manual control. Consequently, this study suggested the possibility of blower's real-time control combined with pre-sensing technology. Also, it is expected that the low energy sewage treatment can be applied to sewage treatment facilities dependent on operation by manpower, and it will contribute to the reduction of greenhouse gas emissions.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.289-295
• /
• 2013

The capacity of a pressure fan can be designed based on the air flow resistance of containers packed with fruits and vegetables in a pressure cooling system. This study was conducted to develop an air flow resistance model that was dependent on changes in the air flow rate and the method of stacking containers. The air flow resistance of a container packed with uniformly shaped balls was 1.5 times greater than the sum of the air flow resistance of a vacant container and that of a wire net container packed with only balls. In addition, the air flow resistance increased exponentially as the width of the stacks increased; however, the air flow resistance did not increase greatly as the length and height of the stacks increased, which indicates that the air flow resistance is primarily influenced by the width of the stack in the air flow direction. The air flow resistance in two lines of stacking was up to 17% less than that of the width of the stack. It was also possible to determine the air flow resistance using a function of the air flow resistance through a single container and develop a prediction model. A prediction model of air flow resistance that is dependent on the stacking method and the air flow resistance of a single container was developed.

• Plant Journal
• /
• v.10 no.4
• /
• pp.24-28
• /
• 2014

During this study, number of fan by ambient air temperature that condenser pressure satisfies steam turbine exhaust pressure condition with intervals of $3^{\circ}C$ within the 150 MW thermal power plant site temperature range of $-17.1^{\circ}C$ to $36.7^{\circ}C$ was reviewed. An air cooled condenser changes its operating pressure influenced by cooling air circulation amount by atmospheric temperature and number of fan. For stable power plant operation, these were confirmed to maximize a quantity of air-cooled condenser fans at above or equal from design ambient temperature and to reduce an amount of circulating air to an air cooled condenser by depending on a quantity of fan considering exhaust pressure operation condition of a steam turbine at below design ambient temperature.