• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1321-1328
• /
• 2015

A radio is a half-duplex voice communication method using the PTT(: Push To Talk), occupy a single line calls during transmission. As an interface between the telephone and the radio, UHF and VHF, for voice communication between the different heterogeneous devices, A device automatically switches between the two devices is required. Therefore, in accordance with the performance of the voice switching apparatus for detecting a voice to be transmitted from an input signal, loss of the audio signal to be transmitted is subjected to Significant influence. Conventional method has the problem responding to noise by setting the level through simple means of amplitude of input signal, in other words, the energy level of the input signal. This paper, by using the audio signal processing techniques, this discriminated what the voice is among the input signal and substantiated a device for the automatic voice transmission between heterogeneous devices. With this proposal, I was confirmed of improvement of performance in the automatic voice switching device, could perform loss-less transmission of voice between heterogeneous devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1527-1536
• /
• 1993

A new transmitter circuit for remote controllers is designed to provide flexibility and expandibility in function. The circuit employs a microcode approach to accept various code format, length and pulse widths through programming, and the precessing logics is eliminated to reduce its size. The circuit was Implemented using FPGA(Field Programmable Gate Array) and it was found to operate successfully).

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2611-2613
• /
• 2002

본 논문에서는 전력선 통신 채널의 간접 잡음 측정에 대한 연구를 하였다. 주위 환경에 의한 Noise 및 여러 통신매체에 의한 방해전파에 의해 전력선 통신 채널은 송신 측의 고출력 요구와 가능한 전력선 통신의 대역폭이 감소하는 악화된 통신환경을 보여 준다. 이러한 Noise를 측정하는 방법은 Coupling Capacitor를 이용한 직접 측정 방식과 이동 측정 장치를 이용한 간접 측정 방식이 있다. 전자는 광범위한 측정지역과 측정장비의 설치 등에서의 번잡함으로 효과적인 Noise 측정이 어렵다. 본 논문에서는 두 가지 방식의 Noise 측정 결과의 비교 및 검토를 통해 이동 측정 장치를 이용한 방식의 장점과 보완할 점을 검토였으며, 특히 직접 측정 방식과의 결과 값의 차이를 보상할 수 있는 상관관계 분석의 필요성을 고찰하였다.

• KSCI Review
• /
• v.15 no.1
• /
• pp.225-228
• /
• 2007

컴퓨터 영상 화면을 아날로그 음성영상신호로 변환한 후 무선으로 송신하여 처리하기 때문에 해상도가 낮아 화질이 떨어진다. 또한 대형프로젝션TV에 보낼 영상화면의 단말기 RGB포트에 게이트웨이를 직접 연결해야 하는 불편이 따른다. 이러한 문제를 해결하기 위하여 이 논문에서는 IEEE802.11b/g 무선네트워크 기반에서 대용량 영상데이터를 최대 54Mbps의 속도로 송수신할 수 있는 무선통신시스템 개발과 이를 게이트웨이에 적용하여 영상데이터까지 무선으로 처리할 수 있도록 하는 장치를 개발하고, 대용량 영상데이터 송수신 처리 소프트웨어를 개발한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1523-1526
• /
• 2002

기존의 길 안내시스템은 지리정보시스템(GIS)와 무선데이터통신을 이용하여 목적지까지의 길을 음성과 지도로 안내하는 서비스였다. 이는 지리정보처리 장치 또는 마이크로 브라우저 등을 설치해야만 길 안내 등의 교통안내가 가능했었다. 본 논문에서는 이동형 단말기 또는 휴대폰에서 전기의 장치나 시스템을 필요로 하지 않아도 가능한 시스템을 제시하였고, 일반전인 전화 또는 전자메일 송신만으로 길 안내 처리가 가능하게 하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.3
• /
• pp.35-43
• /
• 2001

Imposing electromagnetic field using transmitter of buried metal object in skill that detect underground object sensing person atonement in being widowed on the land being magnetized upside numerical value of buried metal object searching way used most widely current by skill be. This paper proposed about mode and detection system of underground object that sense the changed magnetic and judge real radish buried metal object sign of the cook because this treatise forms magnetic in land and design and composition of display device. Also, through simulation of detection system of underground object, showed that can measure radish judgment sign of the cock of underground object

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.350-357
• /
• 2005

DSRC provides high speed radio link between Road Side Equipment and On-Board Equipment within the narrow communication area. In this paper, a 5.8 GHz up-conversion mixer for DSRC communication system was designed and fabricated using 0.8 m SiGe HBT process technology and IF/LO/RF matching circuits, IF/LO input balun circuits, and RP output balun circuit were all integrated on chip. The chip size of fabricated mixer was $2.7mm\times1.6mm$ and the measured performance was 3.5 dB conversion gain, -12.5 dBm output IP3, 42 dB LO to If isolation, 38 dB LO to RF isolation, current consumption of 29 mA for 3.0 V supply voltage.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.55-62
• /
• 2019

In this paper, we consider K-user multiple-input multiple-output (MIMO) interference channel and present a transceiver design for simultaneous wireless information and power transfer (SWIPT) systems. In addition, we consider a SWIPT system where an information decoding receiver and an energy harvesting receiver are co-located at the same receiver. In the proposed scheme, signal-to-leakage plus noise ratio (SLNR) is used as a cost function and a transceiver is designed to satisfy the threshold of the harvested energy. More specifically, transmitter precoding vector, receiver filter vector, and power spitting factor are simultaneously designed to maximize SLNR with a constraint on the harvested energy. Through computer simulation, we compare the signal-to-interference plus noise ratio (SINR) performance of the proposed and conventional schemes. When a special condition among the number of transmit antennas, receive antennas, and users is satisfied, the proposed scheme showed better SINR performance than the conventional scheme at low signal-to-noise ratio (SNR) range. Also, when the condition is not satisfied, the proposed scheme showed better performance than the conventional scheme at all SNR range.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.24-29
• /
• 2015

Recently, with developments of various networks, devices and various services, energy efficiency has become one of the most crucial issues with respect to sustainability of mobile devices. For connecting to networks seamlessly to offer services, a scenario of RF energy harvesting which supplies energy to wireless devices with RF signals is assumed. To increase the efficiency of RF energy harvesting, this paper proposes a RF energy harvesting algorithm which is based upon a frequency selective fading map. Through the algorithm, a receiver of mobile device can get fading information at each frequency and select a frequency which has the best quality. At the end, the simulation result demonstrates its superiority by showing a 4.45dB improvement in comparison to a deep fading frequency point.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.566-572
• /
• 2000

In the receiver of optical communication systems, a demultiplexer converts to a single data stream with a highbit rate into several parallel data streams with a low bit rate. In this paper, we design a 1:4 demultiplexer using SiGe HBT with emitter size of 2x8um² The operation speed is 10Gbps, the rise and fall times of 20-80% are37ps and 36ps, respectively and the dissipation of power is 1.40W.