• Title/Summary/Keyword: 송수신 시스템

Search Result 1,067, Processing Time 0.026 seconds

Efficient Selection Methods of Transmit-Receive Antennas Based on Channel Capacity For MIMO Systems (MIMO 시스템을 위한 채널 용량에 기반을 둔 송수신 안테나의 효율적인 선택 기법)

  • Kim, Hyo-Shil;Kim, Ryun-Woo;Kim, Jong-Deuk;Byun, Youn-Shik
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.11C
    • /
    • pp.1092-1099
    • /
    • 2006
  • Future wireless communication systems will employ spatial multiplexing with multiple antennas at both transmitter and receiver to take advantage of larger capacity gains as compared to the systems that use a single antenna. However, in order to reduce higher hardware costs and computational burden, it will require an efficient transmit-receive antenna selection algorithm, which we propose in this paper. Through simulation and comparative analysis of various existing methods and the one we propose in this paper, the algorithm we propose was validated as nearer to the optimal selection technique than existing nearly optimal antenna selection schemes.

Design and Implementation of LTE-TDD 2×2 MIMO Bidirectional RF Hybrid Beamforming System (LTE-TDD 2×2 MIMO 양방향 RF 하이브리드 빔포밍 시스템 설계 및 구현)

  • Lee, Kwang-Suk;Kim, Dong-Hyun;Oh, Hyuk-Jun
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.23 no.4
    • /
    • pp.23-31
    • /
    • 2018
  • This paper presented the implementation and design of the 2T-2R wireless HD video streaming systems over 1.7 GHz frequency band using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system used USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transmitted from USRP RIO up or down converts to 1.7 GHz by using self-designed 1.7 GHz RF transceiver modules and it is finally communicated HD video data through self-designed 2x9 sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express x4 to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 32 dBc and to transmit and receive HD video in experiment environment anywhere. The proposed hybrid beam forming system could be used not only in the future 5G mobile communication systems under 6 GHz frequency band but also in the systems over 6 GHz frequency band like ones in mmWave frequency bands.

Development of the remote management and control system for wireless CATV network (무선 CATV망의 원격 관리 및 제어 시스템의 개발)

  • 송문규;이상설
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.23 no.4
    • /
    • pp.1134-1147
    • /
    • 1998
  • Remote management and control system for LMDS wireless CATV network which is being developed at SK Telecom is developed. This system is composed of central control division located at head center and remote units for remote transceivers equipped in base stations and repeaters. It monitors the state of the remote transceivers and controls the operations using PSTN for iterface. Remote transceivers whould be equipped in pairs, and the operations are exchanged automatically in case of emergency situations. the remote units are designed not only to perform commands form central control division, bet to inform emergency situations such as disorder and power failure. This system works well, which is established at Central research center in SK Telecom with remote units such as BTX, PPTX, and PPRX. This system could be utilized in other applications requiring remote control through sligh modifications.

  • PDF

UWB Based Short-Range Wireless Positioning by One-Shot Transmission and Method (UWB기반 단일송수신을 통한 근거리 무선측위 시스템)

  • Choi, Sung-Soo;Oh, Hui-Myung;Shin, Yo-An;Lee, Jae-Jo;Lee, Young-Kyu
    • Proceedings of the KIEE Conference
    • /
    • 2005.07d
    • /
    • pp.3049-3051
    • /
    • 2005
  • 본 논문은 UWB(Ultra Wide Band) 펄스 기반의 단일 송수신을 통한 근거리 무선측위 시스템 및 방법에 관한 것으로서, UWB 펄스의 높은 시간 분해능을 이용하여 근거리에서 높은 정밀도를 가지고 태그의 위치를 획득할 수 있다. 특히, 마스터-슬레이브 형태로 구성된 비콘(beacon)들 간의 사전 설정을 통해 마스터 비콘과 무선측위 대상인 태그 사이의 단일 송수신만으로 ToA(Time of Arrival) 및 TDoA(Time Difference of Arrival) 기법을 적용할 수 있도록 하며, 이로써 태그의 신호 송신을 최소화하여 태그의 저전력 동작을 가능케하는 UWB기반 단일송수신을 통한 근거리 무선측위 시스템이다.

  • PDF

In-Orbit Test Operational Validation of the COMS Image Data Acquisition and Control System (천리안 송수신자료전처리시스템의 궤도상 시험 운영 검증)

  • Lim, Hyun-Su;Ahn, Sang-Il;Seo, Seok-Bae;Park, Durk-Jong
    • Journal of Satellite, Information and Communications
    • /
    • v.6 no.2
    • /
    • pp.1-9
    • /
    • 2011
  • The Communication Ocean and Meteorological Satellite(COMS), the first geostationary observation satellite, was successfully launched on June 27th in 2010. The raw data of Meteorological Imager(MI) and Geostationary Ocean Color Imager(GOCI), the main payloads of COMS, is delivered to end-users through the on-ground processing. The COMS Image Data Acquisition and Control System(IDACS) developed by Korea Aerospace Research Institute(KARI) in domestic technologies performs radiometric and geometric corrections to raw data and disseminates pre-processed image data and additional data to end-users through the satellite. Currently the IDACS is in the nominal operations phase after successful in-orbit testing and operates in National Meteorological Satellite Center, Korea Ocean Satellite Center, and Satellite Operations Center, During the in-orbit test period, validations on functionalities and performance IDACS were divided into 1) image data acquisition and transmission, 2) preprocessing of MI and GOCI raw data, and 3) end-user dissemination. This paper presents that IDACS' operational validation results performed during the in-orbit test period after COMS' launch.

A Study on the Design and Implementation of VHF band TRM for Phased Array Radar (위상배열레이다용 초단파대역 송수신모듈의 설계 및 구현에 대한 연구)

  • Kim, Ki-Jung;Shin, Seung-Gyu;Jang, Youn-Hui
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.13 no.2
    • /
    • pp.321-326
    • /
    • 2018
  • This study describes the design and implementation of TRM(Transmit and Receiver Module) for detection for targets of small RCS(Radar Cross Section). Through the pre-simulation analysis of radar system about RF, the main specifications of TRM are verified. After the fabrication of TRM, the main characteristics such as the maximum output, noise figure, spurious were confirmed. In the future, the radar system test will be carried out by assembling TRMs, antenna radiator, and the transceiver that generates and receivers the radar waveform reflected.

Design and Implementation of High Efficiency Transceiver Module for Active Phased Arrays System of IMT-Advanced (IMT-Advanced 능동위상배열 시스템용 고효율 송수신 모듈 설계 및 구현)

  • Lee, Suk-Hui;Jang, Hong-Ju
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.51 no.7
    • /
    • pp.26-36
    • /
    • 2014
  • The needs of active phased arrays antenna system is getting more increased for IMT-Advanced system efficiency. The active phased array structure consists of lots of small transceivers and radiation elements to increase system efficiency. The minimized module of high efficiency transceiver is key for system implementation. The power amplifier of transmitter decides efficiency of base-station. In this paper, we design and implement minimized module of high efficiency transceiver for IMT-Advanced active phased array system. The temperature compensation circuit of transceiver reduces gain error and the analog pre-distorter of linearizer reduces implemented size. For minimal size and high efficiency, the implented power amplifier consist of GaN MMIC Doherty structure. The size of implemented module is $40mm{\times}90mm{\times}50mm$ and output power is 47.65 dBm at LTE band 7. The efficiency of power amplifier is 40.7% efficiency and ACLR compensation of linearizer is above 12dB at operating power level, 37dBm. The noise figure of transceiver is under 1.28 dB and amplitude error and phase error on 6 bit control is 0.38 dB and 2.77 degree respectively.

Conceptual Design of COMS Ground System for Meteorological and Oceanic Mission (통신해양기상위성의 기상 및 해양 임무 수행을 위한 지상국 개념설계)

  • Lim, Hyun-Su;Choi, Hae-Jin
    • Satellite Communications and Space Industry
    • /
    • v.12 no.1 s.27
    • /
    • pp.115-121
    • /
    • 2004
  • 본 연구의 목적은 2008년 발사를 목표로 개발 중인 통신해양기상위성(COMS: Communication, Ocean and Meteorological Satellite) 1호의 해양/기상 임무를 수행을 지원할 지상 시스템의 개념 설계를 수행하는 것이다. 송수신 시스템 개발을 위한 사용자 요구사항 분석과 외국 정지궤도의 위성의 영상 전 처리 시스템에 대한 기법 분석이 이루어 졌으며, 이를 바탕으로 통신해양기상위성 송수신 시스템의 데이터 흐름도를 작성하였다. 통해기 지상 시스템은 신뢰성 있는 위성 운영과 자료처리 기술의 자립화를 위해 국내 기술로 자체 개발될 예정이다.

  • PDF

A Study on the Analysis and Design of Wireless LAN RF Transceiver System (무선 LAN RF 송수신 시스템 분석 및 설계에 관한 연구)

  • Yun, Yeo Song;Kim, Hak Sun
    • Journal of Advanced Navigation Technology
    • /
    • v.6 no.4
    • /
    • pp.296-305
    • /
    • 2002
  • This paper suggests the parameters of the requirement conditions of minimum performance for a RF transceiver system design from the specifications of IEEE Std 802.11b and IEEE Std 802.11a. It has yielded the requirement conditions of minimum performance in the design process due to these parameters. A RF transceiver system is simulated by using Agilent ADS(Advanced Design System) after selecting the components of optimal conditions to fabricate the RF transceiver system. The results of both the analysis and the simulation will be used for a real wireless LAN design.

  • PDF

PSTN용 멀티미디어 통합 시스템 구현에 대한 연구

  • 백원석;신성효;이교식;장인철;남현정;박병수;장혜진;박재현;박규식
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.201-204
    • /
    • 1999
  • 본 연구의 목적은 기존의 PSTN 전화망을 이용하여 음성 통화는 물론 데이터, 팩스 일 동영상 등 다양한 멀티미디어 정보를 송수신 할 수 있는 멀티미디어 단말 시스템을 개발하는데 있다. 본 개발시스템은 ITU-T의 V.34 규격을 만족하는 DSP 모뎀과 음성 및 데이터를 동시에 송수신할 수 있는 DSVD 기능, 그리고 다양한 멀티미디어 기능을 구현 및 제어하게되는 시스템 콘트롤러등으로 구성되며 사용자들로서는 LCD/Touch Screen 메뉴에서 원하는 정보서비스를 선택하기만 하면 음성, 데이터 통신, 팩스 등의 다양한 서비스를 이용할 수 있게 된다.

  • PDF