• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2431-2436
• /
• 2012

This paper is implemented simple visible light communication system by combining the communications through LED lighting. It uses a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter to realize LED visible light communication. Initial distance value of the developed transmission and receiver is more than 0~1.5m for LED visible light communication, the overall system transmission rate is organized with thousands kbps variability visible light media transmission system. It was measured the performance experiment during lens wearing or not wearing in order to increase the overall efficiency of the LED module, configures the LED and PD to existing PC module for the performance analysis of the implemented research, experiments the maximum communication distance of the transmitter/receiver according to LED count and the transmission rate, check about application methods and the possibility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1602-1609
• /
• 1998

In this paper, the design and implementation of the novel RF front end circuit for CDMA based PCS phone is described. This novel scheme is realized by building the power amplifier module combined with duplexer. The dielectric filters which are parts of duplexer are broken up and relocated into the module. Electromagnetic analysis for via holes and coupling between narrow transmissio lines is icluded to design a circuit. The combined moule has been minimaturized to be as small as 1.5CC. It has satisfied IS-95 requirements for linearity performances of CDMA signal at 24-dBm output power as well as played apart as a duplexer. The operating current of about 95mA has been saved owing to both rearranging dielectric filters and limiting operating point to class-B by considering real working power range of CDMA phones.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.195-198
• /
• 2011

Recent expansion of the ubiquitous environment and improvement of the USN give lots of U-healthcare systems. In this paper, we design and implement a wireless ECG measurement system that can send ECG signals among the sensors and collector. It can also give almost the same precision as a hospital ECG system with mobility. The most important fact of the mobile ECG system is the signal data connectivity among the sensors and device such as signal cables or wires. we can eliminate the signal cable through the Zigbee sender and collector via implementing Zigbee-SD communication system that can receive the ECG signal data. We also implement ECG app software on the smart phone that can analyze and show the data results directly. It can give lots of mobility and usability under ubiquitous environment and would be a very efficient wireless ECG system for U-healthcare service.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.199-201
• /
• 2021

The Internet of Things (IoT) is a technology that can organically connect people and things without time and space constraints by using communication network technology and sensors, and transmit and receive data in real time. The IoT used in all industrial fields has limitations in terms of storage allocation, such as device size, memory capacity, and data transmission performance, so it is important to manage power consumption to effectively utilize the limited battery capacity. In the prior research, there is a problem in that security is deteriorated instead of improving power efficiency by lightening the security algorithm of the encryption module. In this study, we proposes a low-power security architecture that can utilize high-performance security algorithms in the IoT environment. This can provide high security and power efficiency by using relatively complex security modules in low-power environments by executing security modules only when threat detection is required based on inspection results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1165-1171
• /
• 2006

In this paper, we designed radio data transceiver to control the machine or equipments for automation in local areas. The designed module can transmit data with 153.6Kbps and uses 424MHz RF carrier to transmit data in the ISM band regulation. It has a processor, CPLD chip of the Altera Company, to control the data in transmitting and receiving. The processor is implemented by programming with VHDL. We will make this module with compact in dimension and higher data rate and apply to RFID technology.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1155-1160
• /
• 2011

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. Duplexing methode uses FDD to transmit and receive broadband data at the same time. In the case of FDD we assign a private use channel each with the transmission at the receiving. In this paper, We implement multiple access wireless OFDM transceiver. We verified that one ground transceiver communicates with two car transceiver at the same time.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1008-1013
• /
• 2011

The importance of broadband wireless communication system at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. Duplexing methode uses FDD to transmit and receive broadband data at the same time. In the case of FDD we assign a private use channel each with the transmission at the receiving. In this paper, We implement multiple access wireless OFDM transceiver. We verified that one ground transceiver communicates with two car transceiver at the same time.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.825-827
• /
• 2001

SDR(Software Defined Radio)은 여러 세대의 이동 통신 시스템 무선방송 및 다양한 통신 시스템이 존재하는 환경에서 소프트웨어 업그레이드로 무선장치 및 서비스를 제공할 수 있는 효율적인 해결 방안으로 대두되고 있다. SDR 이라는 기술은 하드웨어 수정 없이 모듈화 된 소프트웨어의 변경만으로 단일의 송수신 시스템을 통해 다수의 무선 통신 규격을 통합 수용하는 무선 인터페이스 기술이다[1]. 이러한 기술을 실현하기 위해서는 소프트웨어 다운로드 기술이 매우 중요하게 된다. 왜냐하면 시스템에 프로그램을 다운로딩해서 하드웨어가 Reconfiguration 되어 사용자가 원하는 대로 시스템이 셋팅이 될 수 있어야 하기 때문이다. 소프트웨어 다운로드 방법에는 크게 공중파를 이용하는 방법, 컴팩트한 이동식 디바이스로부터 다운로딩 받는 방법, 전화나 케이블 서비스 등을 통해 근거리/원거리 호스트 서버로부터 소프트웨어를 다운로딩 받는 방법, 네트워크를 통해서 소프트웨어를 다운로드 하는 방법 등이 있다[2]. 이 중에서 본 논문에서는 SDR을 위한 임베디드 시스템을 구현 하였고, 리눅스 포팅을 하였으며 스마트 카드를 이용한 소프트웨어 다운로드 방범을 제시함으로써 SDR 의미 구현을 시도해 보았다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.373-376
• /
• 2002

가정 내 정보 가전 기기들의 수효가 늘어 가고, 초고속 인터넷 서비스가 일반 가정으로 보급되는 등 가정 내의 정보 통신 환경이 변하고 있다. 이 가정 내 정보 가전 환경을 통합 관리하면서 외부 통신망과의 연계를 담당하는 기기로서 홈 서버가 이용되어 진다. 또한 코덱 기술의 발전으로 인터넷을 통해 원격지로 영상을 송수신할 수 있게 되었다. 본 논문에서는 이러한 정보 가전 환경에서 홈 서버를 기반 시스템으로 한 영상 감시 시스템의 구현에 대해 기술하였다. 본 시스템은 홈 서버 시스템에 X.10 프로토콜을 이용하여 카메라와 같은 디바이스를 제어하도록 하였으며, 통화 호출에 사용하는 프로토콜로는 IETF(Internet Engineering Task Force)에서 권고한 SIP(Session Initiation Protocol) 영상 회의 프로토콜을 기반으로 하였다. 본 영상 감시 시스템은 SIP의 User Agent를 홈 서버에 구현하여 비디오 코덱 등을 연결하였고 SIP의 메시지와 X.10 디바이스 콘트롤을 연동하는 모듈을 추가하여 카메라 선택 등의 디바이스 제어를 하는 동시에 집 외부에서 내부의 상황을 영상으로 모니터링할 수 있도록 하였다.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.1
• /
• pp.24-29
• /
• 2009

In this paper, we show the implementation of the low-cost RF transceiver module for parking control system. Super regenerative receiver scheme was adopted for this module due to its simplicity, low-cost, low power consumption and small number of components to improve reliability of the systems. For improving communication error rate by collision and in-band noise, dual-channel hopping scheme was adopted. Testing prototypes under the environment of simultaneous transmissions, we verified that the designed scheme is able to improve the success rate of data transmission of wireless parking control system cost effectively.