• 한국분무공학회지
• /
• 제15권2호
• /
• pp.67-73
• /
• 2010

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail direct injection system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors with different electric driving characteristics, including solenoid-driven and piezo-driven type. Namely three common-rail injectors with different electric current wave were investigated in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. As this research results, it was found that pilot injection of common-rail system was effected by rate of injection with different electrical characteristic for injector driving.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.152-155
• /
• 2014

ABS/ESC 기능 통합 SoC에 사용되는 자동차 제동 솔레노이드 밸브 구동용 디지털 PWM 컨트롤러를 설계하였다. 직접 제어와 PI 제어 방식을 지원하도록 설계된 PWM 컨트롤러는 총 12채널로 구성된다. 직접 제어 방식의 6개 채널은 설정된 PWM 듀티값에 따라 일정한 PWM을 출력하며, PI 제어 방식의 6개의 채널은 설정된 전류값을 기준으로 드라이버의 전류 값에 따라 변화하는 PWM을 출력하여 일정한 전류를 갖도록 설계되었다. 또한 솔레노이드 밸브 열림 감지, Dither, PWM 위상 시프트 기능 등을 갖는다. 설계된 PWM 컨트롤러는 44,779 게이트로 구현되었으며, 0.18um CMOS 공정으로 제작된 칩의 측정 결과로부터 기능이 정상적으로 동작하는 것을 확인하였다.

• 한국분무공학회지
• /
• 제15권1호
• /
• pp.25-30
• /
• 2010

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail direct injection system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors with different electric driving characteristics, including solenoid-driven and piezo-driven type. Namely three common-rail injectors with different electric current wave were investigated in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. As this research results, it was found that pilot injection of common-rail system was effected by rate of injection with different electrical characteristic for driving the injector.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.683-691
• /
• 2011

원자력발전소 용 솔레노이드 밸브의 국산화에 필수 과정인 기기검증 기술을 개발하기 위해 관련 규정을 분석하고, 시험절차 및 방법, 시험조건, 시험장치 및 허용기준 등을 구체화하였다. 솔레노이드 밸브의 기기검증 규격은 법규, 가이드, 규정 등의 순으로 계층화되어 있으며, 시험기기와 시험항목에 따라 규정이 세분화되어 있다. 세부 규정인 IEEE를 분석한 결과 기기검증 시험은 크게 기능시험, 일반환경시험 및 사고시험으로 구분되어 있는데, 일반환경시험과 사고시험을 통해 발전소 환경과 동일한 조건에서 솔레노이드 밸브를 노화시킨 후 기능시험에서 노화된 밸브의 성능을 확인하는 방식으로 검증시험을 수행하도록 구성되어 있었다. 본 논문에서 제시한 솔레노이드 밸브의 기기검증 시험절차와 방법은 기기검증 수행자뿐만 아니라 밸브 제조사에게 매우 유용한 기술 자료가 될 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.505-508
• /
• 1995

This paper suggests new hydraulic circuit to control the pressure of clutches and brakes which has several advantages than conventional hydraulic circuit in automatic transmissions. In conventional hydraulic circuit, the pressures of all friction elements are controlled by only one pressure control valve and accumlators. So, controllable range is limited and it is unable to control the friction elements independently. Therefore, we can not do the fine control of timing between apply clutch and release clutch which is needed in clutch-to clutch shifting automatic transmissions. To overcome these faults, we designed the direct-acting hydraulic circuit where one pressure control valve and pressure control solenoid valve are allocated to each friction element and control that independently. Through this structural improvement of hydraulic circuit, we can achieve elaborate aontrol to clutch pressure. Specially, We can control the timing between apply clutch and release clutch delicately which is needed in clutch-to-clutch shifting.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.577-580
• /
• 1995

This paper suggests direct-acting hydraulic circuit to control clutches and brakes in automatic transmission. As only one pressure control valve controls the pressure of several friction elements with accumulators in conventional hydraulic circuit, the controllable range is limited. In addition, it is difficult to control the fine timing between apply clutch and release clutch. So, we designed new method to control the pressure of clutch which uses ressure control valve and pressure control solenoid valve independently in each friction element. through this structure improvement of hydraulic circuit, we can control the pressure of clutches and brakes finely and fine timing of between apply clutch and release clutch.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.251-256
• /
• 2003

The capability of pilot injection with small fuel quantity at all engine operating conditions is one of the main feature of the common rail system. The purpose of the pilot injection is to lower the engine noise and to reduce the NOx emissions. This study describes the pilot spray structure characteristics of the common-rail diesel injectors, solenoid-driven and piezo-driven type, with different electric driving characteristics So, three common-rail injectors with different electric current wave were used in this study. The pilot spray characteristics such as spray speed, spray tip penetration, and spray angle were obtained by spray images, which is measured by the back diffusion light illumination method with optical system for high-speed temporal photography. Also the CFD analysis was carried out for fuel behavior under high pressure in between needle and nozzle of solenoid-driven injector to know the condition of initial injection at experiment test. It was found that pilot injection of common-rail system was effected by rate of injection and temperature of injected fuel and electrical characteristic of the driven injector.

• 한국분무공학회지
• /
• 제19권1호
• /
• pp.9-14
• /
• 2014

Performance of DI diesel engine with high-pressure fuel injection equipment is directly related to its emission characteristics and fuel consumption. So, the electro-hydraulic injector for the common-rail injection system should be designed to meet the precise high fuel delivery control capability. Currently, most high pressure injector in use has a needle driven by the solenoid coil energy or the piezo actuator controlled by charge-discharge of output pulse current. In this study, macroscopic spray approaching method was applied under constant volume chamber to research the performance of three different injectors : solenoid, indirect-acting piezo and direct-acting piezo type for CR direct-injection. LED back illumination for Mie scattering was applied on the liquid spray visible of direct-acting piezo injector, including hydraulic-servo type solenoid and piezo-driven injectors. As main results, we found that a direct-acting piezo injector had better a spray tip penetration than hydraulic-servo injectors in spray visualization.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.17-24
• /
• 2006

This study was performed to figure out spray behavior and fuel atomization characteristics of a piezo-driven injector and a solenoid-driven injector in the common-rail injection system under the same design parameters and test conditions. The process of spray injection was visualized by using the spray visualization system composed of a Nd:YAG laser and an ICCD camera. The atomization characteristics were investigated in terms of axial mean velocity, Sauter mean diameter(SMD) and droplet distributions obtained from a phase Doppler particle analyzer system. Compared with solenoid-driven injector, the piezo-driven injector has short injection delay and reaches quickly to the maximum injection value. Spray tip penetration shows some difference, however, spray angle of piezo-driven injector is wider than that of solenoid-driven injector. Sauter mean diameter of piezo-driven type injector is smaller than that of solenoid-driven type.

• 한국인터넷방송통신학회논문지
• /
• 제20권5호
• /
• pp.79-88
• /
• 2020

본 연구에서는 태양광 패널 청소 로봇이 진공 패드 압력을 이용하여 경사진 패널 위를 미끄러짐 없이 효율적으로 주행하는 방법을 제안한다. 이 방법에서는 로봇을 경사로 패널에 고정시키기 위해 로봇 발에 부착된 고무 패드의 압력을 진공으로 만들게 된다. 구동 방식으로 Linkage 매커니즘을 적용하여 미끄러짐을 방지함과 동시에 중량을 감소하여 소모전력을 낮추는 방법을 제안하였다. 로봇의 안전한 구동을 위하여 솔레노이드 밸브, 근접 센서, 엔코더를 사용하여 로봇의 움직임을 감지하며, 주행할 때 고무 패드의 압력을 제어하여 안전한 경사로 주행을 가능하게 하였다. 로봇의 전진 동작을 위하여 다중의 솔레노이드 밸브들의 동작 시퀀스를 완성하여 양쪽 발에 부착된 6개의 진공패드가 진공 및 대기압을 정확하게 형성 할수 있도록 제어하여 이동 중 미끄러짐 없이 전진할 수 있게 하였다. 마지막으로 주행 및 회전 실험을 통해 36도의 태양광 패널에서 직진 및 회전 동작을 수행할 수 있음을 확인하였다.