• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.741-749
• /
• 2018

The purpose of this study is to propose a rational and scientific damage calculation model in relation to damages caused by bid rigging in construction projects. Previous studies and precedents in relation to calculating damages from bid rigging suggest that the main issue was the lack of consideration in standards for deciding successful bids, selection of inadequate standard comparative markets, insufficiency in analyzing the appropriateness of competitive bid price influence factors, and absence of calculation model verification. In order to improve on these issues, a damage calculation method on alternative tenders for construction projects was proposed. For this calculation model, first, a standard market adequate to the successful bid selection standards was determined, second, an appropriate factor was selected by analyzing the correlation between competitive bid price influence factors, and third, a regression analysis was conducted on the selected factor. Lastly, this was demonstrated through verification of appropriateness, significance & normality of the proposed model and application of actual bid rigging cases. Through the proposed calculation model, this study seeks to serve as a base to prevent opportunity damages for parties involved in related court cases by early resolution of disputes and relief from issues of unfair damage burdens on a particular party.

• Korean small business review
• /
• v.42 no.1
• /
• pp.19-41
• /
• 2020

In Korea, punitive damages were introduced in the 2011 Fair Transactions in Subcontracting Act(FTSA), and in 2019 the Patent Act, Trade Secret Protection Act(TSPA), Industrial Technology Protection Act(ITPA), and Mutually Beneficial Cooperation Act(MBCA). In punitive damages, the judgment of 'intentional' is especially important, and it is necessary to refer to US precedents since there is no accumulated case. Major Company can avoid intentional counseling through the advice of lawyers, but SMEs may have to punish punitive damages due to a lack of awareness of the system. In the case of TSPA, ITPA, FTSA, and MBCA, except for Patent Act, the provisions related to proof of damage have not been well maintained yet. Therefore, the data submission order system of these laws needs to be revised to the level of patent Act need to be. TSPA needs to be amended in the future to estimate the amount of the royalties in estimating the amount of damages so that it can receive the 'reasonably' estimated amount rather than the usual amount. On the other hand, ITPA, FTSA, and MBCA do not have any provisions for the estimation of damages. Besides, it is difficult to evaluate the technology value in the case of leakage or deodorization of new technologies. Therefore, valuation needs to be carried out by a credible institution along with the development of a model for calculating damages.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.193-193
• /
• 2019

기후변화로 인한 거대 자연재해 발생의 위험이 지속적으로 증가하고 있으며, 국외의 경우 주요정부기관, 보험사 및 연구기관 중심으로 자연재해 피해예측 모델을 개발하여 사용하고 있다. 침수사고 인한 피해는 건물은 물론이고 가재도구, 재고자산, 기계시설 등의 내용물에서도 발생하며, 건축물 신축단가 등을 이용해 비교적 쉽게 자산가치를 산정할 수 있는 건물구조물과 다르게, 건물내용물의 자산가치는 시설물의 업종, 용도, 사용자 특성 등에 따라 변동성이 큰 특징이 있다. 내용물의 피해액 추정을 위해 자연재해 피해예측 모델은 건물 구조물과 내용물 가치의 비율인 CSVR(Contents to Structure Value Ratio)을 사용하며, CSVR은 시설물 용도에 따른 자산가치평가 통계를 이용해 산정할 수 있다. 충분한 자산가치평가 DB를 확보할 경우 CSVR의 정확도 확보가 가능할 것이며, 이를 위해 국내에서는 민간보험사의 재물보험 계약 4만여건의 건물, 내용물 보험가입금액을 행정안전부 도로명전자지도에서 분류하는 건물 용도에 따라 분석한 연구결과가 있다. 하지만, 일반적으로 보험가입단계에서 대략적으로 추정하는 보험가입금액과 실제 자산의 가치는 차이가 있을 수 있지만, 보험가입물건의 실제 자산가치는 일부만 DB화 되어 있는 단점이 있다. 본 연구에서는 사고 발생 후 작성되는 손해사정보고서에서 평가한 정확한 자산가치 DB를 수집하여, 보험가입금액을 기준으로 산정한 CSVR의 결과와 비교하였다. 손해사정보고서에서 평가한 실제 자산가치를 기준으로 분석한 CSVR과 보험가입금액을 기준으로 산정한 CSVR은, 업종에 따라 유사하거나 큰 차이를 보이는 경우도 있었으며, 침수로 인한 정확한 피해액 추정을 위해서는 보다 양질의 DB확보를 통한 CSVR의 정확도 확보가 필요한 것으로 분석되었다.

• The Journal of Society for e-Business Studies
• /
• v.23 no.1
• /
• pp.47-63
• /
• 2018

This study suggested quantitative models to calculate a royalty rate as an important input factor of the relief from royalty method which has the characteristics of income approach method and market approach method that are generally used in the valuation of intangible assets. This study built a royalty rate regression model by referring to the patent infringement damages cases based on royalties, i.e., by using the royalty rates as a dependent variable and the patent indexes of the corresponding patent right as independent variables. Then, a logistic regression model was constructed by referring to inter-partes review cases of patent rights, i.e. by using not-unpatentable results as a dependent variable and the patent indexes of the corresponding patent right as independent variables. A final royalty rate was calculated by matching the royalty rate from the royalty rate regression model with a not-unpatentable probability from the logistic regression model. The suggested royalty rate was compared with the royalty rate obtained by the traditional methods to check its reliability.

• Journal of the Korean Geographical Society
• /
• v.41 no.1 s.112
• /
• pp.106-120
• /
• 2006

Natural or man-made disaster has been expected to be one of the potential themes that can integrate human geography and physical geography. Typhoons like Rusa and Maemi caused great loss to insurance companies as well as public sectors. We have implemented a natural disaster management system for a private insurance company to produce better estimation of hazards from high wind as well as calculate vulnerability of damage. Climatic gauge sites and addresses of contract's objects were geo-coded and the pressure values along all the typhoon tracks were vectorized into line objects. National GIS topog raphic maps with scale of 1: 5,000 were updated into base maps and digital elevation model with 30 meter space and land cover maps were used for reflecting roughness of land to wind velocity. All the data are converted to grid coverage with $1km{\times}1km$. Vulnerability curve of Munich Re was ad opted, and preprocessor and postprocessor of wind velocity model was implemented. Overlapping the location of contracts on the grid value coverage can show the relative risk, with given scenario. The wind velocities calculated by the model were compared with observed value (average $R^2=0.68$). The calibration of wind speed models was done by dropping two climatic gauge data, which enhanced $R^2$ values. The comparison of calculated loss with actual historical loss of the insurance company showed both underestimation and overestimation. This system enables the company to have quantitative data for optimizing the re-insurance ratio, to have a plan to allocate enterprise resources and to upgrade the international creditability of the company. A flood model, storm surge model and flash flood model are being added, at last, combined disaster vulnerability will be calculated for a total disaster management system.