• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1211-1216
• /
• 2000

Asynchronous transfer mode (ATM) can be efficiently used to transport packet data services. The switching system will support voice and packet data services simultaneously from end to end applications. To guarantee quality of service (QoS) of the offered services, source rateot send packet data is needed to control the network overload condition. Most existing control algorithms are shown to provide the threshold-based feedback control technique. However, real-time voice calls can be dynamically connected and released during data services in the network. If the feedback control information delays, quality of the serviced voice can be degraded due to a time delay between source and destination in the high speed link. An adaptive algorithm based on the optimal least mean square error technique is presented for the predictive feedback control technique. The algorithm attempts to predict a future buffer size from weight (slope) adaptation of unknown functions, which are used fro feedback control. Simulation results are presented, which show the effectiveness of the algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.635-642
• /
• 2008

We propose the Optimum Power Allocation (OPA) scheme for Distributed Antenna Systems(DAS) in the time-varying Rayleigh fading channel. Recently, the OPA schemes which uses the Channel State Information (CSI) including a small scale (fast) fading have been proposed. However, the channel is changing vary fast over time due to small scale fading, therefore Bit Error Rate (BER) increases. Because of this reason, we derive the OPA for minimizing BER in DAS, which only uses a large scale fading to CSI and excepts a small scale fading. The simulation results show that the proposed OPA achieves better BER performance than conventional OPA considering a small scale fading in time-varying Rayleigh fading channel, and also has similar performance in Rayleigh flat-fading environment. The BER performance of proposed OPA which derived in Rayleigh fading channel is similar to minimum BER of Ricean fading channel which has small Line-of-Sight (LOS).

• The Korean Journal of Applied Statistics
• /
• v.21 no.6
• /
• pp.1093-1107
• /
• 2008

In this study, we considered linear regression model with various spatial dependency structures in order to make more reliable prediction of precipitation in South Korea. The prediction approaches are based on semi-variogram models fitted by least-squares estimation method and restricted maximum likelihood estimation method. We validated some candidate models from the two different estimation methods in terms of cross-validation and comparison between predicted values and observed values measured at different locations.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.67-74
• /
• 2002

Asynchronous transfer mode (ATM) can be efficiently used to transport packet data services. The switching system will support voice and packet data services simultaneously from end to end applications. To guarantee quality of service (QoS) of the offered services, source rate to send packet data is needed to control the network overload condition. Most existing control algorithms are shown to provide the threshold-based feedback control technique. However, real-time voice calls can be dynamically connected and released during data services in the network. If the feedback control information delays, quality of the serviced voice can be degraded due to a time delay between source and destination in the high speed link, An adaptive algorithm based on the optimal least mean square error technique is presented for the predictive feedback control technique. The algorithm attempts to predict a future buffer size from weight (slope) adaptation of unknown functions, which are used for feedback control. Simulation results are presented, which show the effectiveness of the algorithm.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.295-301
• /
• 2010

Flow accelerated corrosion(FAC) of carbon steel pipes in nuclear power plants has been known as one of the major degradation mechanisms. It could have bad influence on the plant reliability and safety. Also detection of FAC is a significant cost to the nuclear power plant because of the need to remove and replace insulation. Recently, the interest of the guided wave testing(GWT) has grown because it allows long range inspection without removing insulation of the pipe except at the probe position. If GWT can be applied to detection of FAC damages, it will can significantly reduce the cost for the inspection of the pipes. The objective of this study was to determine the capability of GWT to identify location of FAC damages. In this paper, three kinds of techniques were used to measure the amplitude ratio between the first and the second welds at the elbow area of mock-ups that contain real FAC damages. As a result, optimal inspection technique and minimum detectability to detect FAC damages drew a conclusion.

• Journal of Internet Computing and Services
• /
• v.7 no.6
• /
• pp.113-121
• /
• 2006

To reduce switch cost, the optimum numbers of tunable wavelength converters (TWCs) and internal wavelengths required for contention resolution of asynchronous and variable length packets like internet traffics, is presented in the optical packet switch (OPS) with the shared fiber delay line (FDL) buffer. To optimize TWCs and internal wavelength related to on OPS design cost, we proposed a scheduling algorithm for the limited TWCs and internal wavelengths. For three TWC alternatives (not shared, partially shared, and fully shared cases), the optimum numbers of TWCs and internal wavelengths to guarantee minimum pocket loss are evaluated to prevent resource waste. Under o given load, TWCs and internal wavelengths could be significantly reduced, guaranteeing the same pocket loss probability as the performance of on OPS with full TWCs and internal wavelengths.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1115-1124
• /
• 1996

An MCL(Molten Caustic Leaching) treatment is a chemical refinery process which is used for the desulfurization and demineralization by alkali treatment. The MCL treatment removes ash by converting mineral like Si, Fe, V, Ni etc. in petroleum cokes into soluble salts. The MCL has an advantage minimizing carbon loss in comparison to other desulfurization process. Reaction variables for the desulfurization and demineralization in the study were leaching temperature, leaching time, ratio of caustic to cokes, acid concentration and time for washing, and particle size. At the optimum condition, above 99% of desulfurization and about 90% of demineralization was obtained. FT-IR and SEM analysis showed that the structure and surface of the particle was closely related with the degree of sulfur and ash removal, and leaching temperature as well.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.2
• /
• pp.19-28
• /
• 1999

While the codifying works or the earthquake resistant design codes for buildings and bridges have been carried out progressively, such works for tank structures are still at the beginning steps. In case of the collapse of tank structures under seismic actions, substantially severe damages are expected due to the spillage of tank contents in addition to the direct economic losses of tanks and contents. Therefore not only the analysis and verification methods for the dynamic behavior of tank structures but also the measures of minimizing the damage propagation should be included in the codes for tank structures. In this paper the design concepts and principles, the analysis and verification methods as well as the measures against the damage propagation are set forth, which are mandatory for the preparation of the earthquake resistant design codes for cylindrical liquid-storage steel tanks.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.126-130
• /
• 2002

Optimal storage conditions were investigated for 'Fuyu' persimmon fruits and cucumbers were stored under conditions of 70% relative humidity(RH) at 25$^{\circ}C$, 80% RH at l0$^{\circ}C$ and 90% at 5$^{\circ}C$ or l0$^{\circ}C$ of relative humidity, respectively and their qualities in microbial counts, decay ratio, surface color difference and chemical attributes were monitored during the storage period. 'Fuyu'persimmon fruits and cucumbers stored under 90% of relative humidity showed the minimal change in weight loss, decrease of ascorbic acid content, surface color difference and decay by putrefactive microorganisms. As the results of this experiment, 'Fuyu' persimmon fruits and cucumberf stored under 9% of relative humidity were best fer maintaining their freshness.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.69-78
• /
• 2010

In this study, Fire Hazards were evaluated through computer simulation using FDS program for an apartment fire accident. The results of fire simulation showed that the maximum heat release rate in the case of no sprinklers activation was 7,700 kW which was about 16 times of that in the case of sprinklers activation, 497 kW and there was a very high fire hazard due to the backdraft phenomenon when the door of fire room was forced to open. Regarding the hazard time of fire room temperature and detection time of detectors, available evacuation time was 32.5 seconds of minimum to 53.5 seconds of maximum. In the case of sprinklers activation, fire hazard in the apartment was showed to be very low due to the fire control by the spray cooling of sprinklers. This study shows that what a important function for fire safety is the activations of fire sprinkler system and emergency alarm system and what a large loss can cause if these systems don’t activate in fire accidents.