• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.67-76
• /
• 2012

In this study, we established objective appraisal standard by applying newly made appraisal standard to those areas equipped with the protection system targeted to the Mobility handicapped announced in this edition (issue 5, volume 9(Oct., 2010)) beyond simple evaluation related to protector satisfaction. Additionally, we achieved efficient budget execution by conducting the preliminary estimation assessment regarding those areas on which recognition devices should be newly deployed. Through the assessment of the system coordination, the maximum safety distance is proved to be 72.2m. On the basis of this result, we applied dangerous grade to the deployment of recognition devices considering both psychological and accidental risk. With this, we proposed valuation basis to enable us to do future business. Based on this assessment standard, the degree of risk is proved to decrease by 35.2% compared to before conducting the demonstration project in terms of evaluation of comprehensive risk regarding intended areas. Additionally, we confirmed the fact that the degree of risk can decrease by 33.1% totally after having recognition devices built according to the deployment standard within budget. Furthermore, comprehensive risk can decrease up to 94% compared to the level of the demonstration project even though we spend 21.9% less of the existing budget. Hence, we can say that the deployment method of recognition devices related to the degree of risk is applied efficiently in the near future in terms of controlling comprehensive risk and cutting down budget through this study.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.13-29
• /
• 2016

In this study, we analyzed the causes of major faults in the biogas plant through the case of gas engine failure when cogenerating electricity and heat using biogas as a fuel in the actual sewage treatment plant and suggested countermeasures. Hydrogen sulfide in the biogas entering the biogas engine and water caused by intermittent malfunction of the water removal system caused intercooler corrosion in the biogas engine. In addition, the siloxane in the biogas forms a silicate compound with silicon dioxide, which causes scratches and wear of the piston surface and the inner wall of the cylinder liner. The substances attached to the combustion chamber and the exhaust system were analyzed to be combined with hydrogen sulfide and other impurities. It is believed that hydrogen sulfide was supplied to the desulfurization plant for a long period of time because of the high content of hydrogen sulfide (more than 50ppm) in the biogas and the hydrogen sulfide was introduced into the engine due to the decrease of the removal efficiency due to the breakthrough point of the activated carbon in the desulfurization plant. In addition, the hydrogen sulfide degrades the function of the activated carbon for siloxane removal of the adsorption column, which is considered to be caused by the introduction of unremoved siloxane waste into the engine, resulting in various types of engine failure. Therefore, hydrogen sulfide, siloxane, and water can be regarded as the main causes of the failure of the biogas engine. Among them, hydrogen sulfide reacts with other materials causing failure and can be regarded as a substance having a great influence on the pretreatment process. As a result, optimization of $H_2S$ removal method seems to be an essential measure for stable operation of the biogas engine.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.5
• /
• pp.529-541
• /
• 2020

Although TBM's cutterhead requires design review for fatigue failure due to wear-induced section loss as well as heavy load during excavation, it is difficult to find a case of fatigue analysis for TBM cutterhead at present. In this study, a stress-life design review was conducted on cutter heads with a diameter of 8.2 m using S-N curves as a safety life design concept. Also, we introduced the fatigue design method of construction equipment and the method of assessing fatigue damage and explained the results of the fatigue analysis on the TBM cutter head with a diameter of 8.2 m. The S-N curve has been shown to play a key role in fatigue design and can also be used to assess how much fatigue damage a structure is suffering from at this point in time. In the future, it is necessary to find out when fatigue problems occur during using the equipment and when it is good to conduct safety inspections of the equipment.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.823-832
• /
• 2006

The Purpose of Similarity(Reproduction) Degree Appraisal is to determine the equality or similarity between two programs and it is a system that presents the technical grounds of judgment which is necessary to support the resolution of software intellectual property rights through expert eyes. The most important things in proceeding software appraisal are not to make too much of expert's own subjective judgment and to acquire the accurate-appraisal results. However, up to now standard research and development for its systematic techniques are not properly made out and as different expert as each one could approach in a thousand different ways, even the techniques for software appraisal types have not exactly been presented yet. Moreover, in the analyzing results of all the appraisal cases finished before, through a practical way, we blow that there are some damages on objectivity and accuracy in some parts of the appraisal results owing to the problems of existing appraisal procedures and techniques or lack of expert's professional knowledge. In this paper we present the model for the standardization of software-similarity-appraisal techniques and objective-evaluation methods for decreasing a tolerance that could make different results according to each expert in the same-evaluation points. Especially, it analyzes and evaluates the techniques from various points of view concerning the standard appraisal process, setting a range of appraisal, setting appraisal domains and items in detail, based on unit processes, setting the weight of each object to be appraised, and the degree of logical and physical similarity, based on effective solutions to practical problems of existing appraisal techniques and their objective and quantitative standardization. Consequently, we believe that the model for the standardization of software-similarity-appraisal techniques will minimizes the possibility of mistakes due to an expert's subjective judgment as well as it will offer a tool for improving objectivity and reliability of the appraisal results.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.395-404
• /
• 2005

There have been large concerns about survivability defined as the capability of a system to perform a mission-critical role, in a timely manner, in the presence of attacks, failures. In particular, One of the most important core technologies required for the design of the ITS(Intrusion Tolerance System) that performs continuously minimal essential services even when the computer system is partially compromised because of intrusions is the survivability one of In included the dependability analysis of a reliability and availability etc. quantitative dependability analysis of the In. In this Paper, we applied self-healing mechanism utilizing two factors of self-healing mechanism (fault model and system response), the core technology of autonomic computing to secure the protection power of the ITS and consisted of a state transition diagram of the ITS composed of a primary server and a backup server. We also defined the survivability, availability, and downtime cost of the ITS, and then performed studies on simulation experiments and two cases of vulnerability attack. Simulation results show that intrusion tolerance capability at the initial state is more important than coping capability at the attack state in terms of the dependability enhancement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2915-2925
• /
• 2013

This study examined the moral judgments and ethical decision-making and analyzed ethical dilemmas experienced in practice by nursing students. The data were collected using self-reported questionnaires and reports from 189 college students in their 2nd ~ 4th grades. Data collection period was from Nov 6th - 20th in 2012. Each grade's P(%) scores were 47.92, 43.74, and 43.75 respectively.. For stage 4 score, each grade's scores were 22.37, 22.98, and 19.74. This result shows that, compared to juniors, senior student's P(%) scores did not drop and stage 4 scores rather decreased, which is in line with the results of previous studies about the effects of ethics education. This finding could be attributed to the regular and voluntary case presentations and discussions required for the senior participants. Regarding ethical decision-making type, the most favored was type 3(35.45%). Among seven categories of the ethical dilemmas facing the students, the most commonly reported was the patient's rights and dignity, followed by practices based on nursing standards, arranging for dying patients. This study raises the need that the curriculum is revised to encourage student's participation in the analysis of ethical issues they confront in the field.

• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.290-296
• /
• 2015

The purpose of this study was to derive the proposals and to suggest the exposure dose reduction scheme on pediatric head CT scan by analyzing and comparing CT dose index (CTDI) and the national diagnostic reference levels. From January 2014 to December, 231 children under 10years who were requested a pediatric head CT scan with head injury were examined. Research methods were to research and analyze the general characteristics kVp, mA test coverage $CTDI_{vol}$ and DLP referring to dose reports and electronic medical record (EMR). As a result, 7.4%(17 patients) of the total subjects in $CTDI_{vol}$ showed a national diagnostic reference levels exceeding. For DLP 41.6%(96 patients) in excess was relatively higher than $CTDI_{vol}$. DLP was exceeded more than about 60% that is higher than the CT dose index presented by Korea Food & Drug Administration. it is cause of high DLP that scan range increased more than about 30% wider than the standard test coverage presented in Health Insurance Review & Assessment Service. In conclusion, it is able to significantly lower the dose if it is complied with checking the baseline scan range of pediatric head CT scan and appropriately adjusting the protocol.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.82-89
• /
• 2014

Disasters that destroy homes and infrastructure and cause significant financial damage are becoming more common as population centers grow. In addition, several natural disasters have resulted in a major loss of life and created countless refugees due to damage to housing. After major catastrophic disasters, it is very important that the government agencies respond to post-disaster housing issues and provide resources such as temporary housing before the full rehabilitation and reconstruction of destroyed and damaged housing. To provide affordable temporary housing for residents who may lose their homes as the result of a catastrophic disaster including storms, government agencies must develop a post-disaster housing prototype. In general, government agencies should explore several different forms of factory-built single-story, single family housing, such as modular homes, panelized homes, and precut homes. In urban cities including New York and Seoul, it is very important to provide housing which supports the demand for higher-density living spaces than single-family homes or trailers typically available due to the high population density and the desire to resettle as many residents as possible in their former neighborhoods. This study identified the urban post-disaster housing prototypes that may provide higher density housing with high quality living spaces, high air quality, and energy efficiency as well as rapid deployment. A case study of "Urban Post-Disaster Housing Prototype Program in New York" was conducted through a detailed interview process with a designer, engineer, contractor, the Office of Emergency Management (OEM) in New York, the U.S. Army Corps of Engineers (USACE), and temporary occupants. An appropriate disaster housing program that can provide living spaces for victims of disasters that keeps residents in their community and allows them to live and work in their neighborhoods was developed.

• The Korean Society of Law and Medicine
• /
• v.17 no.2
• /
• pp.257-279
• /
• 2016

Recently, the Well-dying Act was legislated in Korea, and it will come into effect in August 4, 2017. This Act allows to withdraw the life sustaining treatment from impending death patients and also provide the hospice and palliative treatment to terminal patients. In the Supreme Court's case so called "Madam Kim", medical condition of Madam Kim was a persistent vegetative status owing to brain damage and her family members wanted to remove the artificial ventilation. In 2009, the Supreme Court allowed to withdraw the artificial ventilation under the specific conditions. We applied this new Well-dying Act to the Madam Kim's case hypothetically in order to know this Act can reasonably solve the problem of life sustaining treatment for dying or terminal patients. For the impending patients, the Well-dying Act has the problem not to withdraw the futile treatment due to the advance directives of patients. Vice versa, the terminal patients have no chance to withdraw the life sustaining treatment due to the this Act impose the duty to provide the hospice and palliative treatment despite of advance directives. We need to ruke out the persistent vegetative patients from the terminal patients caused by the cancer, acquired immune deficiency syndrome, chronic obstructive lung disease and chronic liver cirrhosis, In addition, we have to discuss the effect of the advance directives of terminal patients in view of self determination right.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.39-50
• /
• 2013

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the wooden crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. In this study, it was analyzed fracture types and causes of wooden crib wall through detailed investigation and analysis of a large crib wall construction site. As a results, it occurred the damage in the members of 5.7% in a total of 2,315 locations and the damage of header occurred in the members of a header 80.2%. The 65.7% of the damaged header are concentrated in the lower part of crib wall. Therefore, it was analyzed the differences of fracture types and causes of wooden crib wall depending on the installation position and the kinds of members. It is considered basically the members of various forms of distortion and the grain affecting.