• Journal of Integrative Natural Science
• /
• v.1 no.1
• /
• pp.36-40
• /
• 2008

본 논문은 자바 에플릿(Java applet)을 이용하여 보존모형과 비보존모형의 온도에 따른 손상확산(damage spreading)의 특성을 분석하였다. 보존모형인 아이징(Ising)모형과 비보존 모형인 격자기체(lattice gas) 및 Driven Diffusive System(DDS)을 다양한 전이확률(transition probability)을 사용하여 온도에 따라 물질내부에서 손상확산이 어떻게 발전하는지를 자바 에플릿 프로그램을 이용하여 시각화하여 손상확산을 명확히 이해하고자 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.93-101
• /
• 2022

RC Slab bridges in Korea account for more than 70% of the total bridges for more than 20 years of service. As the number of aging structures increases, the importance of safety diagnosis and maintenance of structures increases. For highway bridges, cracks are a main cause of deck deterioration, which is very closely related to the decrease in bridge durability and service life. In addition, the damage rate of expansion joints and bearings accounts for approximately 73% higher than that of major members. Therefore, this study defined damage scenarios combined with devices damages and deck deterioration. The stress distribution and maximum stress on the deck were then evaluated using design vehicle load and daily temperature gradient for single and combined damage scenarios. Furthermore, this study performed damage-spread analysis and predicted condition ratings according to a deck deterioration model generated from the inspection and diagnosis history data of cracks. The heterogeneous damages combined with the member damages of expansion joints and bearings increased the rate of crack area and damage spread, which accelerated the time to reach the condition rating of C. Therefore, damage to bridge members requires proper and prompt repair and replacement, and otherwise it can cause the damage to bridge deck and the spread of the damage.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.323-326
• /
• 1998

본 연구는 boron-doped 실리콘 기판에 heavy 인온인 비소를 먼저 이온 주입시키고 비소의 주입에 의해 실리콘 표면이 손상된 영역에 다시 인을 이온 주입시켰을때, 인의 확산을 관찰하기 위해 microtec 시뮬레이터를 통해 모의공정실험을 실행하였다. 손상된 비정질의 실리콘 기판에서 열처리 전과 inet(N/sub 2/) 분위기에서 인은 느리게 확산을 하였다. 그렇지만 dry와 wt oxidation 열처리 분위기에서는 의의 확산 속도가 증가됨 (OED:oxidation-enhanced idfusion)을 관찰되었다. 실리콘 기판에서 인의 확산을 관찰하기 위해 ICECREM 시뮬레이터를 사용하여 앞의 경우와 동일하게 먼저 비소를 주입하여 실리콘 표면에 손상을 입히고 그 다음 공정에서 인을 주입하였을 때, 열처리 전과 inet, dry 산화분위기에서는 비정질의 실리콘 기판에 이온 주입한 경우와 동일하게 의의 확산 속도가 증가하였지만, wet 산화분위기에서는 오히려 dry 산화분위기에서 보다 확산이 늦어짐이 관찰되었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.102-110
• /
• 2023

PSC-I girder bridges constitute the largest proportion among highway bridges in Korea. According to the precision safety diagnosis data for the past 10 years, approximately 41.3% of the PSC-I bridges have been graded as C. Furthermore, with the increase in the aging of bridges, preemptive management is becoming more important. Damage and deterioration to the deck and girder with a long replacement cylce can have considerable impacts on the service and deterioration of a bridge. In addition, the high rate of device damages, including expansion joints and bearings, necessitates an investigation into the influence of the device damage in the structural members of the bridge. Therefore, this study defined representative PSC-I girder bridges with single and multiple spans to evaluate heterogeneous damages that incorporate the damage of the bridge member and device with the deterioration of the deck. The heterogeneous damages increased a crack area ratio compared to the individual single damage. For the single-span bridge, the occurrence of bearing damage leads to the spread of crack distribution in the girder, and in the case of multi-span bridges, expansion joint damage leads to the spread of crack distribution in the deck. The research underscores that bridge devices, when damaged, can cause subsequent secondary damage due to improper repair and replacement, which emphasizes the need for continuous observation and responsive action to the damages of the main devices.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.99-110
• /
• 2016

When a riser is damaged, the oil spills to sea. Oil spills cause huge economic losses as well as a destruction of the marine environment. To reduce losses, it is needed to predict spilled oil volume from risers and the excursion of the oil. The present paper simulated the oil spill for a damaged riser using open source libraries, called Open-FOAM. To verify numerical methods, jet flow and Rayleigh-Taylor instability were simulated. The oil spill was simulated for various damaged leak size, spilled oil volume rates, damaged vertical locations of a riser, and current speeds. From results, the maximum excursion of the spilled oil at the certain time was predicted, and a forecasting model for various parameters was suggested.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.121-126
• /
• 1997

PWR 원자력발전소의 정상 및 과도상태 운전중 동적모델과 확산모델을 이용하여 핵분열 생성물이 냉각재로 유출되는 현상을 모델링하고 국내외 핵연료 검사자료를 이용하여 개발된 전산프로 그램을 실증하였다. 손상핵연료수 예측결과 기존에 개발되어 사용되고 있는 Westinghouse사의 CADE 코드와 ABB-CE사의 IODYNE 코드보다 더 정확하였으며, 손상영역 및 연소도 예측도 비교적 정확하였다.

• Journal of the Korean Vacuum Society
• /
• v.3 no.3
• /
• pp.341-345
• /
• 1994

As+ 와 P+ 이온들이 주입된 실리콘에서 주입 이온들의 확산 및 실리콘의 재결정화에 열처리가 미치는 영향에 대해서 조사하였다, 여기서 이온 주입량은 실리콘 표면영역을 비정질화하기에 충분한 양 이었다. 이온 주입 시실리콘 내부에 생성된 손상들을 제거하기 위해 온도와 시간을 변화시켜 가며 시편 을 전기로 속에서 열처리하였다. 그러나 이때 야기된 도우펀트들의 과도적인 확산에 의해서 접합깊이는 예측한 것보다 더욱 깊은 곳에서 나타나다. 이러한 과도적인 확산은 주로 이온 주입으로 인해 야기된 시편들이 손상들을 제거하기 위한 열처리 과정동안 일어난 것으로 생각된다. 이것은 SIMS와 SUPREM IV simulation 에 의해서 확인할 수 가 있었다. As+ 와 P+ 이온이 주입된 실리콘의 결정성 회복을 Raman 분광법을 이용하여 조사하였다.

• Water for future
• /
• v.53 no.7
• /
• pp.30-41
• /
• 2020

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.243-250
• /
• 2005

In elevated irrigation aquaducts, one can observe a common damage pattern. That is, cracks, and crushing of concrete are usually repeated at a certain interval even if no faults are found in the design and construction of the structures. To investigate the causes of this damage, longitudinal deformations of several aquaducts have been measured. The analysis of the measured data suggests that the damages are mainly caused by cumulative repetition of extension and contraction due to temperature changes.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.372-380
• /
• 2007

Surface damage due to subsidence is an inevitable consequence of underground mining, which may be immediate or delayed for many years. The surface damage due to abandoned underground mine is observed to be two subsidence types such as simple sinkhole or trough formation to a large scale sliding of the ground from with in the subsided area. An evaluation of the risk of a subsidence occurrence is vital in the areas affected by mining subsidence. For a subsidence prediction or a risk evaluation, there has been used various methods using empirical models, profile functions, influence functions and numerical models. In this study, a simple but efficient evaluation method of subsidence hazard is suggested, which is based on a diffusion theory and uses just information about geometry of caving and topography. The diffusion model has an analogous relationship with granular model which can explain a mechanism of subsidence. The diffusion model is applied for the evaluation of subsidence hazard in abandoned metal and coal mines. The model is found to be a simple but efficient tool because it needs information of geometry of caving and gangway and the topography.