• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.135-140
• /
• 2001

산업이 고도화 첨단화 됨에 따라 전력의 안정성과 신뢰성이 중요한 문제로 인식되고 있고, 한 순간의 정전도 허용하지 않는 전력설비의 열화진단이 점점 중요한 과제로 제기되고 있다 특히 전력 설비에서 가장 중요한 것은 변압기의 신뢰성으로 절연지의 성능에 크게 영향을 받으며, 이것은 권선의 절연 특성에 상당한 영향을 준다. 그러므로 절연지의 열화상태 파악은 변압기 권선에서 발생할 수 있는 주요 문제를 예측하는데 필수적이며, 이런 문제의 사전예측은 치명적인 고장과 다른 설비에 대한 2차적 손상을 피할 수 있다.(중략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.1
• /
• pp.81-86
• /
• 1996

Subsea pipelines have an important role in the overall tasks of offshore oil and gas production but arc exposed to various hazards with high potential risks of damage resulting in serious economic loss and impact on ocean environment. In this paper, the dynamic free span is analysed, which is one of main risk factors against the safety of subsea pipelines and the allowable length of dynamic free span which is important for the design of subsea pipelines is determined. The allowable free span length is examined by considering the relationship between vortex shedding frequency and natural frequency of pipeline free span, and the variation of the allowable length is analysed for different boundary conditions of pipe ends. The free span is regarded as a beam on elastic foundations and the boundary condition of the beam is generalized by modelling as restrained by linear and rotational spring at each end. A non-dimensionalized curve is obtained to facilitate the determination of exact allowable length of dynamic free span for subsea pipelines and is applied to the pipelines which is to be installed in the gas fields of the south of East Sea of Korea.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.42-48
• /
• 2009

There are a number of factors affecting the continued airworthiness of composite structure. Unlike metal structure, damages made in manufacturing processes or maintenance repair procedures need to be considered. The different levels of degradation and damage, which may occur, must be considered for structural substantiation of static strength, stiffness, flutter, and damage tolerance. This can start with an evaluation of environmental effects for the particular composite material. Matrix-dominated composite properties, such as compressive strength, are most sensitive to moisture absorption and temperatures. Static strength substantiation includes the smaller damages that will not be detected in production or maintenance inspection while damage tolerance addresses larger damages that need to be repaired once discovered. In this paper, we intend to list the airworthiness regulations and advisory circular that are deemed closely related to the certification of composite airplanes.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.443-451
• /
• 2013

Acoustic emission(AE) has emerged as a powerful nondestructive tool to detect any further growth or expansion of preexisting defects or to characterize failure mechanisms. Recently, this kind of technique, that is an in-situ monitoring of inside damages of materials or structures, becomes increasingly popular for monitoring the integrity of large structures like a huge wind turbine blade. In this study, the activities of AE signals generated from external artificial sources was evaluated and located by new developed signal mapping source location method and this test is conducted by 750 kW full-scale blade. And a new source location method was applied to assess the damage in the wind turbine blade during step-by-step static load test. In this static loading test, we have used a full scale blade of 100 kW in capacity. The results show that the acoustic emission activities give a good agreement with the stress distribution and damage location in the blade. Finally, the applicability of the new source location method was confirmed by comparison of the result of source location and experimental damage location.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.218-224
• /
• 2011

A modal method is presented for the investigation of the effects of measurement errors in damage detection for dynamic structural systems. The structural modifications to the baseline system result in the response changes of the perturbed structure, which are measured to determine a unique system in the inverse problem of damage detection. If the numerical modal data are exact, mathematical programming techniques can be applied to obtain the accurate structural changes. In practice, however, the associated measurement errors are unavoidable, to some extent, and cause significant deviations from the correct perturbed system because of the intrinsic instability of eigenvalue problem. Hence, a self-equilibrating inverse system is allowed to drift in the close neighborhood of the measured data. A numerical example shows that iterative procedures can be used to search for the damaged structural elements. A small set of selected degrees of freedom is employed for practical applicability and computational efficiency.

• Applied Biological Chemistry
• /
• v.38 no.6
• /
• pp.512-515
• /
• 1995

In order to examine the effect of rehydration methods on viability after freeze-drying of Streptomyces aureofaciens, we labeled the DNA of S. aureofaciens with $^3H-adenine$. Extracellular radioactivity levels appeared to be high in the rehydrated solutions after freeze-drying than freezing-thawing. In effects of rehydration after freeze-drying, the viability of the cell appeared about 20% in case of with admitting air at single ampule, but that of which appeared about 91% in case of without admitting air at double ampule. Thus, S. aureofaciens cells were damaged during the process of rehydration after freeze-drying.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.170-177
• /
• 2020

This paper presents an open-fault tolerance control method for active neutral point clamped (ANPC) inverter with high frequency/low frequency (HF/LF) modulation. By applying the ANPC inverter with SiC MOSFETs and Si IGBTs, the system efficiency and performance can be improved compared to a Si-based inverter. HF/LF modulation is used for a megawatt-scale inverter to minimize the commutation loop. The open-switch failure in megawatt-scale inverter causes severe damage to load and huge expenses when the inverter has been shut-down. The proposed tolerance control of open-switch failure provides continuous operation and improved reliability to the ANPC inverter. The effectiveness of the proposed fault tolerance control is verified by simulation results.

• Journal of the Korean Institute of Gas
• /
• v.14 no.2
• /
• pp.15-21
• /
• 2010

The demand of gas as an eco-friendly energy source has being increased. With increasing the LPG demand, the number of LPG filling station. In this work, the influence on over-pressure caused by Vapor Cloud Explosion in gas station was calculated by using the Hopkinson's scaling law and injury effect by the accident to a human body was estimated by applying the probit model. As a result of the injury estimation conducted by using the probit model for leakage 10% of 20ton storage tank. The distances from LPG station for death and tympanum rupture are 36.5 and 290 meters, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.8-17
• /
• 2003

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear Power Plant. In Pipes of energy Plants, sometimes, the local wall thinning may result from severe erosion-corrosion (E/C) damage. However, the effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. In this paper, the monotonic bending tests were performed of full-scale carbon steel pipes with local wall thinning. A monotonic bending load was applied to straight pipe specimens by four-point loading at ambient temperature without internal pressure. From the tests, fracture behaviors and fracture strength of locally thinned pipe were manifested systematically. The observed failure modes were divided into four types; ovalization. crack initiation/growth after ovalization, local buckling and crack initiation/growth after local buckling. Also, the strength and the allowable limit of piping system with local wall thinning were evaluated.

• Microbiology and Biotechnology Letters
• /
• v.20 no.6
• /
• pp.642-646
• /
• 1992

We have isolated conditional lethal mutants of Saccharomyces cerevisiae which are low in (1 ~3)-~-D-glucan synthase activity. These mutants were osmotic sensitive at nonpermissive temperature (37$^{\circ}$C) and showed a decreased level of alkali-insoluble cell wall glucan. The decrease in (1 ~3)-~-D-glucan synthase activity of the mutants appeared to be mainly due to the defect in catalytic component rather than in GTP-binding component.