• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.167-178
• /
• 2021

For the preservation and efficient content sharing of 5 volumes (2,866 pages) of Yu Kil-Chun's book published in 1971, which provides an important collection of data for the study of modern Korean history during the late 19th century (enlightenment period of Joseon dynasty). The books were purchased and its preservation status investigated and documented electronically by scanning for permanent preservation of content and to determine the condition of preservation at the time of documentation. The degree of deterioration and damage, such as discoloration, hardening, breakage, and damage in these 50 years old modern printed books was quantified through image analysis and made attempts to visualize the damaged areas. It was observed that the degree of deterioration and damage depended on the material and the surface condition of the paper used, the degree of exposure to light, and the storage environment. The comparison of the preservation status at the time of the photographing (or scanning) and judgment as to whether or not the image under investigation was artificially modified was accomplished by comparing the electronically documented images of Seoyugyeonmun (西遊見聞) in Volume 1 of Yu Kil-Chun's works with images provided on other websites. Practical problems encountered while considering the effective preservation of electronically documented data and publicly sharing it, in the course of this study, with other academic researchers around the world were also summarized.

• Composites Research
• /
• v.29 no.5
• /
• pp.288-292
• /
• 2016

In this paper, a novel ultrasonic propagation imaging system, called a full-field pulse-echo ultrasonic propagation imaging (FF PE UPI) system is introduced. The system nondestructively inspected targets with two-axis translation stage. The coincident laser beams for ultrasonic sensing and generation are scanned and pulse-echo mode laser ultrasounds are captured. This procedure makes it possible to generate full-field ultrasound in through-the-thickness direction as large as the scan area. Structural inspection results in the form of full-field ultrasonic wave propagation videos are introduced, which are painted sandwich control surfaces. In addition, the inspection results of FF PE UPI system are compared with conventional ultrasonic testing methods such as waterjet and portable C-scan.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.3-6
• /
• 2015

Recently, the collection of the sensor data and its analysis become important as the smart buildings equipped with the various sensors appear as a usual scene. The interconnection through the wire cable among the sensors is indispensible because of the information collections such as the temperature, the humidity, and the luminance in the rooms and the hallways for the effective management of the in-building energies. However, these interconnections through the cabling will be very costly, time-consuming, and a difficult task since they will cause some damages to the buildings. Therefore, the interconnections through the unwired connections are required in terms of the deployment effectiveness such as time and cost In this paper, the design and the operation appropriateness are confirmed through the simulation of the signal measurement system for in-building propagation characteristics based on signature sequence.

• Composites Research
• /
• v.31 no.5
• /
• pp.246-250
• /
• 2018

In this paper, laser ultrasonic rotation scanning method was proposed to inspect and visualize defects in corner section of curved composite structure. L-shaped composite specimen with defects in its corner section were inspected using laser ultrasonic rotation scanning method. L-shaped specimens had artificial defects at three different depths to simulate delamination damage. All artificial defects were detected clearly in different time-of-flight according to their depths. Inspection result showed that the proposed method is suitable to inspect round corner section of curved composite structure without any special tools.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.324-326
• /
• 2006

CCD형 영상소자는 방사선 피폭 시 표면과 격자내부에 모두 손상을 받게 되며, 감마방사선이나 X선과 같은 고에너지의 이온화 방사선에 노출될 경우 격자 실리콘 내부에 전자-전공쌍(Electron-hole pair, EHP)이 발생된다. 이러한 EHP는 CCD의 순간 출력 광전류로 변환되어 백색 화소 형태의 영상잡음으로 가시화되며, 이 화소 수는 피폭 방사선량에 비례하여 증가하는 특성을 지니고 있다. 따라서 출력 영상정보를 분석하면 조사된 방사선의 양과 특성을 측정할 수 있다. 본 연구에서는 CCD를 이용하여 가상의 방사능 물질 누출 공간에서 방사선원의 방향과 거리정보를 고속으로 탐지하기 위한 장치와 고속 측정 알고리즘을 구현하고 실제 방사선장에서 실증시험을 수행하였다. 방사선 탐지기는 콘형 납 콜리메이터(Collimator)와 가시광 변환용 신틸레이터(CsITl) 및 차폐체로 구성된 센서부와 제어 및 방사광 신호처리를 수행하는 PC부로 구성된다. 감마방사선($^{60}Co$) 방사선장 실증시험에서 방사선원간 거리 83cm에서 측정된 거리 탐지는 5.3%의 오차로 확인되었다. 이 방사선 탐지기는 임의의 고방사선 누출사고에 대한 초기대응 작업을 수행하기 위한 무인 이동로봇용 방사선 탐지기로 활용이 가능하다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.129-129
• /
• 2023

연안 환경은 기후 및 도시개발과 같은 자연·인공적 요인에 따라 끊임없이 변화한다. 근래에는 연안 도시 인구증가, 기후변화 등의 영향으로 인해 그 변화가 가속화되고 있으며, 특히 연안 침식 및 이에 따른 해안선 변화에 대한 심각성이 대두되고 있다. 연안 침식은 해류와 해안 유사의 마찰로 발생하는 유사이송 현상으로 야기되며, 해안 환경을 변화를 초래하며 인간사회에 경제적인 피해를 주기도 한다. 연안침식이 사회적인 문제로 부상했음에도 여전히 이에 대한 대중적 문제의식은 부족한 실정이다. 이는 대중매체를 통한 시각적인 노출이 가능한 다른 재해에 비해 재해의 물리적 과정에 대한 시각적인 관측이 어렵다는 배경이 있다고 판단된다. 더불어, 재해의 간접체험이 가능한 플랫폼이 부족하다는 점도 원인으로 여겨진다. 기술이 발달함에 따라 시뮬레이션을 통한 재해의 간접체험이 가능한 플랫폼이 개발되어왔으며, 이는 직접 경험하기 어려운 재해에 대해 위험성 인지 및 경각심 고취에 활용되어왔다. 본 연구에서는 수치해석 플랫폼인 Celeris Advent(Tavakkol and Lynett, 2017)를 기반으로 실시간 유사이송 해석이 가능한 인터랙티브 수치모형을 개발하여 문제를 개선하고자 하였다. GUI(Graphical User Interface)를 통해 조작이 가능한 Celeris Advent는 수치해석 결과를 실시간으로 가시화하며, 이에 대한 사용자 상호작용이 가능하다. 이를 기반으로 유사의 흐름에 대해 모의가 가능하도록 모형을 구성하여 실시간 사용자 입력 및 유사이송 물리현상 관측이 가능하도록 모형을 개발하였다. 수치모형 지배방정식은 2차원 천수방정식과 유사이송방정식을 양방향 결합하여 구성하였다. 개발된 모형의 정확성 평가를 위해 1차원 및 2차원 수리실험 데이터를 활용하여 수치실험을 수행하였으며, 전반적인 결과는 실험데이터와 잘 일치하였다.

• Composites Research
• /
• v.22 no.6
• /
• pp.18-22
• /
• 2009

In this paper, we examined impact force and impact behavior through low velocity impact tests of composite laminates. And through c-scan as nondestructive inspection, explored the damaged area being difficult to examine with the visual inspection. Through CAI tests, we also measured the compression strength of composite laminates subjected to low velocity impact. To examine the characteristics of impact behavior measured from low velocity impact test, nondestructive inspection, and CAI test, the simulated data are generated from the test data using Monte-Carlo simulation, then represented it by probability distribution. The testing results using visible stochastic distribution were examined and compared.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.78-85
• /
• 2012

This paper takes precautions proposals against prospective disasters from the space weather maximum in 2013. The space weather maximum could wreak havoc in this world. A geomagnetic space storm sparked by a solar eruption like the one that flared toward earth is bound to strike again and could wreak havoc across the modern world. Despite of the fact that not only researches by colleges and institutions current researches have been focusing on warning systems of space communication and the earth network systems, but also management and control systems are not situated for the space weather blasters. The purpose of the study is that the damage reduces methods implementation on the ultimate space weather communication systems by above lists proposed type analysis. In result, the implementation of the communication disaster management systems deals with the smart IT converged GIS analysis on the flare, solar proton event, geomagnetic storm to the effects of the geomagneticsphere, ionosphere and troposphere from solar maximum. This research can provide affective methods for the saving lives and property protections that implementation of the disaster prediction and disaster prevention systems adapts smart IT systems and converged high tech information systems using decision making support systems of the GIS methodology.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.659-666
• /
• 2015

In this paper, various influence factors on the impact-echo test which is an effective method in characterizing defects such as such as the delamination in the concrete structures were studied. The side to thickness ratio(a/h), the relative position of impacting and sensing points over the delamination that have great effects on the flexural and impact-echo(thickness) modes were investigated and examined by the parametric finite element analysis. As a result, the flexural modes dominate in the case of a/h > 2 and the thickness mode was more evident when a/h < 2. With regard to the relative position of impact source and sensing point to the defect, the flexural modes dominate even when either the loading or sensing point was over the delamination defect. However, the thickness mode prevails when both the impacting and sensing points are over the solid region beyond the delamination area.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.233-240
• /
• 2012

An experimental study to improve the impingement characteristics of the assist gas in laser cutting was carried out. For various assist-gas pressures, and locations and installation angles of the nozzle, the characteristics of the impingement of the jet from a supersonic rectangular nozzle were compared to those previously observed for typical circular nozzles. Schlieren flow visualizations and Pitot pressure measurements downstream of the kerf surface were utilized for this purpose. The present rectangular supersonic nozzle decreased the strength of the Mach disc occurring at the corner of the kerf surface, and thus, could weaken the separation of the assist gas on the kerf surface and increase the Pitot pressures downstream compared to conventional circular nozzles.