• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.119-126
• /
• 2003

This paper presents an algorithm of automatically finding magnitude of each maintenance index regarding step response characteristic for speed control system of driving roller in rolling process. For speed response data with noise, we distinguished possible cases that the number of maximum values is 2 or more into three separate types. Also, we suggested a way of selecting a candidate for reasonable maximum overshoot in each type and developed a decision algorithm of checking whether a candidate chosen is correct maximum overshoot. In terms of two types of test, we showed that magnitude and position in time axis of maximum overshoot can be found well via such algorithm presented in this paper.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.305-310
• /
• 2013

In general, it is difficult to measure dynamic responses of a bridge with stepwise increasing speed of a train during commercial service on a high speed railroad. However, before opening the 2nd stage of the Gyeongbu high speed railroad, there was an opportunity for field tests and measurements of the bridge with stepwise increasing speed(from 170km/ h to 315km/h). The measured responses were compared with the results of a developed bridge/train interaction analysis. Although good agreement was found throughout almost the entire range of speeds, relatively large differences were found in the vicinity of the critical speed at which resonance behavior of the bridge occurs. To investigate the cause of this, reanalyses are performed with re-estimated damping ratios from field tests.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2585-2588
• /
• 2003

2 관성 공진계는 마른 응답을 위해 제어이득을 크게 하면 공진에 의해 축비틀림 진동이 일어나는 경우가 많다. 본 논문에서는 반복 학습 제어기법을 활용하여 불확실한 모델 계수를 포함하는 2 관성 공진계의 진동억제를 시도한다. 2관성 공진계의 경우 제어 대상이 되는 부하측 속도는 학습 제어로 직접 적용하기가 힘들고 또한 측정 또한 어렵다. 본 논문에서는 부하측 속도와 전동기측 속도간의 관계를 이용하여 직접 부하측 속도를 제어하는 대신 전동기측 속도를 제어하여 간접적으로 부하측 속도를 제어하였다. 제안된 방식은 전형적인 2 관성 공진계에 모의 실험을 통해 적용되었고, 정확한 모델이 없이도 진동 없는 마른 응답특성을 보여준다.

• Fire Science and Engineering
• /
• v.17 no.2
• /
• pp.6-9
• /
• 2003

Recently, forced ventilating air conditioning system has been widely used in modern buildings. However, It is obvious that this kind of system may affect on the response of fire detectors at real fire incidents, especially, on the ionization smoke detector, which is critically influenced by air stream. Therefore we studied to verify the response characteristics of air stream by ionization smoke detector for the design of facilities in practice. In this study, experiments were executed to examine the correlation between air velocity and the ionization detector's responses with var-ious air velocity and smoke densities in the simulated test room. As a result of experiments, ionization detector's operating time is in reverse proportion to air velocity. And the detector shows more sensitive reaction when the velocity of smoke stream increase over 60 cm/s. In addition, it was shown that ionization smoke detector is more sensitive to smoldering fires in paper than that in petro-chemicals.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.792-795
• /
• 2008

AGT system is a kind of light railway train. AGT system use of concrete track and rubber tire, so it can be reduce the noise and vibration, compare to the normal train system. And, the dynamic responses of normal bridge are influenced by the dynamic characteristics of bridge, the speed of vehicle and the surface roughness of railway. But the AGT system bridge is influenced not only the above facts but also the guiderail unevenness, because, AGT vehicle steered by guiderail. So, in this study, optimized service condition is suggested for the design and operation of AGT system, by the means of experimental study. The experiments are executed for PSC bridge with length of 30m, at the AGT test line in Kyongsan. The test results are compared and investigated according to the prominence. In the test result, the guiderail prominence influenced on the dynamic response of bridge. It shows a increase as compared with no guiderail prominence in the dynamic response value acceleration, displacement, stain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.309-318
• /
• 1991

In this paper, the integrator used to reduce the error between the reference signal and response, and DC motor are constructed by bond graph. Then the model following servo controller which have the high adaptation with respect to inertia, disturbance and/or load variation in the speed control system of DC motor is designed by the bond graph, and then the usefullness of this modeling method is confirmed in operating analysis and design on controller.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.538-539
• /
• 2008

유비쿼터스 컴퓨팅의 실현을 위해 센서 네트워크 기반의 다양한 위치인식 연구가 수행되었다. 특히 근거리 위치 인식 분야에서는 RSSI를 이용한 위치 인식에 관한 연구가 활발하였으나 RSSI는 통신 환경에 민감하여 균일한 위치 정보 결과를 획득하기 어려우며, RSSI 값을 기반으로 삼각측량 등의 위치 계산을 소프트웨어적으로 처리하기 때문에 응답 속도가 늦다는 단점이 있다. 따라서 최근 Chipcon에서는 CC243x 시리즈에 위치 계산 엔진(Location Engine)을 탑재하여 응답 속도에 대한 종전의 단점을 보완하였으나 여전히 위치 값이 고르지 못한 부분은 개선되지 않았다. 따라서 본 논문에서는 통신 환경으로 인한 위치 정보의 불균등함을 개선하고자 선형 윈도우 알고리즘을 제안한다. 선형 윈도우는 위치 정보에 대한 스무팅을 수행하며, 이를 통해 응답 속도의 저하를 최소화시키면서 위치 변화를 고르게 한다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.201-202
• /
• 2018

본 논문에서는 넓은 범위의 입력전압에서의 빠른 응답속도를 가진 고승압 양방향 컨버터를 제안한다. 제안하는 시스템은 2대의 Buck컨버터와 SRC(Seris Resonant Covnerter)로 구성된 3-stage 구조이며, 고승압이 가능하고 넓은 입력전압 범위에서 고효율을 성취할 수 있다. 또한 제안하는 컨버터는 모든 전압범위에서 빠른 응답속도로 제어를 하며 CC(Constant Current), CV(Constant Voltage), CP(Constant Power) 및 Pulse 동작을 수행한다. 제안하는 양방향 컨버터의 1.8kW급 시작품으로 실험을 통하여 타당성을 검증하였고, 최고효율 96%, 정격효율 90.8%를 달성하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.5
• /
• pp.25-33
• /
• 2001

For the seismic design and analysis of LMR(liquid metal reactor) being developed in Korea, it is necessary to develop the simple seismic analysis model including the fluid-structure interaction effects. In this paper, the theoretical backgrounds for the fluid added mass of the immersed concentric cylinders are investigated and the seismic analysis code using the Runge-Kutta algorithm, which can consider the fluid added mass matrix in system matrix, are developed to perform the time history seismic analysis. Form the coupled modal analysis and the seismic analysis for the simple immersed concentric cylinders, it is verified that the fluid added mass significantly affect the vibration characteristics and the seismic responses. Therefore the fluid coupled effects should be carefully considered in seismic response analysis of the immersed concentric cylinders.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.130-137
• /
• 2021

The characteristics of forced vibration by an external excitation force having a frequency were analyzed according to the amplitude and frequency of the excitation force. To obtain displacement, velocity, and acceleration, numerical analysis was performed to obtain the frequency response, and in particular, each FRF(Frequency Response Function) was analyzed to reveal the location of the system natural frequency and excitation frequency in the frequency domain. In the vibration model caused by external excitation, the natural frequency and distribution of the surrounding excitation mode in displacement, velocity and acceleration FRF. The FRF was also shown in the power spectrum and FRF of real and imaginary parts. The external excitation force was approximated with the excitation force of a sine wave by giving the amplitude and frequency, the mode generated by this excitation force could be distinguished. After numerical analysis by changing the equivalent mass, damping and stiffness, the forced vibration response characteristics by external excitation force were systematically analyzed.