• Microbiology and Biotechnology Letters
• /
• v.26 no.5
• /
• pp.465-469
• /
• 1998

The quantitative and rapid method for measuring the biodegradation of polymer materials in soil was developed. In this study, cellophane film was used as a model biodegradable polymer and the biodegradation was assayed by measuring the amount of glucose which was produced by a hydrolysis reaction using HCl after collecting the film from soil. Cellophane film was degraded 41.2% in 4 months during winter while it was degraded 76.5% in 2 months during summer. It means that biodegradation in soil is affected by environmental conditions. The biodegradation was also measured in an incubator (30$^{\circ}C$, humidity 50-55%) to exclude the environmental variations. Cellophane film was degraded 94% in that condition in 40 days. The biodegradation showed the first order kinetics and the rate constant was 0.067 (1/day). Acceleration of the biodegradation in soil was also studied. We added cultured soil microorganisms or nutrients such as N, P, and S into the soil. While the addition of microorganisms showed the temporary increase of rate constant, the addition of nutrients not only showed the increase of rate constant from 0.096 (1/day) to 0.21 (1/day) but also maintained the effect continuously.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.3
• /
• pp.65-76
• /
• 2005

Speeding up scalar multiplication of an elliptic curve point has been a prime approach to efficient implementation of elliptic curve schemes such as EC-DSA and EC-ElGamal. Koblitz introduced a $base-{\phi}$ expansion method using the Frobenius map. Kobayashi et al. extended the $base-{\phi}$ scalar multiplication method to suit Optimal Extension Fields(OEF) by introducing the table reference method. In this paper we propose an efficient scalar multiplication algorithm on elliptic curve over OEF. The proposed $base-{\phi}$ scalar multiplication method uses an optimized batch technique after rearranging the computation sequence of $base-{\phi}$ expansion usually called Horner's rule. The simulation results show that the new method accelerates the scalar multiplication about $20\%{\sim}40\%$ over the Kobayashi et al. method and is about three times as fast as some conventional scalar multiplication methods.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.373-379
• /
• 2009

Cesium carbonate was used as an adsorbent to capture carbon dioxide from gaseous stream of carbon dioxide, nitrogen, and moisture in a fixed-bed to obtain the breakthrough data of $CO_2$. The deactivation model in the non-catalytic heterogeneous reaction systems is used to analyze the sorption kinetics among carbon dioxide, carbonate, and moisture using the experimental breakthrough data. The experimental breakthrough data are fitted very well to the deactivation model than the adsorption isotherm models in the literature.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.637-645
• /
• 1994

The LDPE films were photolyzed for 100 hours in UV apparatus with 400-W medium pressure mercury lamp radiating wavelengths longer than 254nm. A simple kinetic model was introduced and was applied to interpret the FT-IR absorbance of carbonyl and hydroperoxide bonds as a function of UV exposure time. From these data, the reaction mechanism and the rate determining step of photodegradation were determined.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.105-114
• /
• 2016

When impact load is applied to a plate structure, a common phenomenon that occurs in structures is plastic deformation accompanied by a large strain and eventually it will experience a fracture accordingly. In this study, for the rational design against accidental limit state, the plastic material constants of steel plate which is formed by line heating and by cold bending procedure have been defined through the numerical simulation for the high speed tension test. The usefulness of the material constants included in Cowper-Symonds model and Johnson-Cook model with the assumption that strain rate can be neglected when strain rate is less than the intermediate speed is verified through comparing the present numerical results with those in references. This paper ends with describing the future study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3319-3326
• /
• 2014

Eosin yellow is used a dye and colorant but it is harmful toxic substance. In this paper, batch adsorption studies were carried out for equilibrium, kinetics and thermodynamic parameters for eosin yellow adsorption by activated carbon with varying the operating variables like pH, initial concentration, contact time. Equilibrium adsorption data were fitted into Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherms. By estimated Langmuir constant value, $R_L$=0.067-0.083, and Freundlich constant value, $\frac{1}{n}=0.237-0.267$, this process could be employed as effective treatment for removal of eosin yellow. From calculated Temkin constant, value, B=1.868-2.855 J/mol, and Dubinin-Radushkevich constant, value, E=5.345-5.735 kJ/mol, this adsorption process is physical adsorption. From kinetic experiments, the adsorption process were found to confirm to the pseudo second order model with good correlation coefficient($r^2$=0.995-0.998). The mechanism of the adsorption process was determined two step like as boundary and intraparticle diffusion.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.296-302
• /
• 2006

The kinetics of the thermal-oxidative decomposition of waste polyurethane (PU) according to oxygen concentration has been studied using a non-isothermal thermogravimetric technique at several heating rates from 10 to $50^{\circ}C/min$. A kinetic model accounting for the effects of the oxygen concentration by the differential and integral method based on Arrhenius equation was proposed to describe the thermal-oxidative decomposition of waste PU. To obtain the information on the kinetic parameters such as activation energy, reaction order, and pre-exponential factor, the thermogravimetric analysis curves and its derivatives have been analyzed using the kinetic analysis method proposed in this work. From this work, it was found that reaction orders for oxygen concentration had a negative sign, and activation energy decreased as the oxygen concentration increased. It was also found that the kinetic parameters obtained from the integral method using the single heating rate experiments varied with heating rates. Therefore, it is thought that the differential method using the multiple heating rate experiments more effectively represents the thermal-oxidative decomposition of waste polyurethane.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.11a
• /
• pp.469-472
• /
• 2006

BI 및 ETABr의 농도변화에 따른 속도상수의 변화는 이 반응이 단순한 1차 및 2차 반응 속도식에 맞지 않는다. 이와 같은 현상은 용액 속에서 두 반응 시약인 p-NPDPIN 및 BI와 상전이촉매인 ETABr 사이에 많은 수의 작은 응집된 입자(aggregates)을 형성함을 의미한다. 수용액 속에서는 불용성인 p-NPDPIN과 수용성인 BI가 충돌하여 반응할 기회가 적은데 반하여 ETABr은 이 두 시약을 함께 수용하여 세 분자 사이에 응집현상이 일어남으로 p-NPDPIN과 BI가 반응하기에 충분한 거리 내에 있게 된다. 바꾸어 말하면, 이 두 반응물질이 1:1 adducts로 반응하기보다는 여러 ETABr과 함께 많은 수의 반응분자들이 회합(응집) 되어 있음을 뜻한다.

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.201-207
• /
• 1983

The rate constants for solvated electrons with benzene in the binary mixture (tetrahydrofuran-water) were measured at a various temperatures$(-18{\circ}C{\sim}+51{\circ}C)$ by photolysis. From Arrhenius plots of rate constants it was observed that the activation energies were decreased with increasing tetrahydrofuran(THF) content. Decreasing the viscosity of solvent mixtures by adding water, the rate constants were also decreased. It indicates that the reaction of solvated electrons are not controlled by diffusion. The change of activation enthalpy in kcal $M^{-1}$ and the rate constants in$ M^{-1}sec^{-1}$ were 4.90 and $8.80{\times}10^8$ for 30M% of THF, 2.80 and $5.14{\times}10^8$ for 49M% of THF, and -0.30 and %1.43{\times}10^8$ for 75M% of THF, respectively. The slope of the linear plot of activation enthalpies against activation entropies was $244{\circ}K$, which supports the reaction parameter is the change of activation entropy in the range of the experimental temperature. From the solvent effect on the activation energy, it was found that the step of the reaction, ${e_s}^-+B{\rightleftharpoons}B^-$ shifted to the exothermic reaction with increasing THF content.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.535-542
• /
• 2006

In this study, removals of 1-naphthol by oxidative-coupling reaction using birnessite, one of natural Mn oxides present in soil, was investigated in various experimental conditions(reaction time, Mn oxide loadings, pH, etc). Removal efficiency of 1-naphthol by birnessite was high in all the experimental conditions, and UV-vis. and mass spectrometric analyses on the supernatant after reaction confirmed that the reaction products were oligomers formed by oxidative-coupling reaction. Pseudo-first order rate constants, f, for the oxidative transformation of 1-naphthol by birnessite was derived from the kinetic experiments under various amount of birnessite loadings, and using the observed pseudo-first order rate constants with respect to birnessite loadings, surface area-normalized specific rate constant, $k_{surf}$ was also determined to be $9.31{\times}10^{-4}(L/m^2{\cdot}min)$ for 1-naphthol. In addition, the oxidative transformation of 1-naphthol was found to be dependent on solution pH, and the pseudo-first order rate constants were increased from 0.129 at pH 10 to 0.187 at pH 4.