• 연구논문집
• /
• s.28
• /
• pp.229-238
• /
• 1998

Materials and parts required for nondestructive testing should be evaluated using with standard block. And it is ruled that standard blocks should be fabricated from same or similar material with test specimen. In order to manufacture and export materials and parts, quality assurance system should be required. In this paper, ultrasonic characteristics of ASTM 4340 steel ultrasonic standard block are investigated for nondestructive evaluation of udimet 720Li disc. Microstructures of udimet 720Li alloy are investigated using with optical and transmission electron microscope. Also ultrasonic transit time and attenuation are measured from high power ultrasonic analysis system with phase adjustment method. Conclusively, it is proved that 4340 steel ultrasonic standard block can be use for nondestructive evaluation of udimet 720Li disc.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.2 no.2
• /
• pp.8-13
• /
• 2005

This paper investigates a fast, accurate and inexpensive hydraulic motor speed control system using high speed on-off solenoid valves. In order to retain the advantages of the two position valve and obtain better performance, the valves are operated by pulse width modulation(PWM) control. PWM signal is generated from a LabWIEW program in microcomputer in order to set up various duty ratio and frequency of carrier wave in PWM signal with varying system parameters. As the results of experiments, the speed control of a hydraulic motor was successfully implemented using on-off solenoid valves. In order to attenuate the pressure ripple and speed variation due to discontinuously controlled flow through the on-off valves, a resonator hose fabricated for automobile power steering system was connected between the valve and a hydraulic motor. From experimental results obtained in the hydraulic motor system with a resonator hose, it was ascertained that the resonator hose showed excellent performances in reducing pressure ripple and motor speed variation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.229-230
• /
• 2008

본 논문에서는 비정질-결정질간 가역적 상변화 기록 매질로 이용되고 있는 $(Ag_{5.5}In_{6.5}Sb_{59}Te_{29})$ 합금 박막의 Ag 조성 증가에 따른 원자구조와 상변화 특성간의 상관관계를 연구하였다. 실험에 사용된 AgInSbTe 조성은 5N의 금속 파우더를 용융-냉각법으로 벌크를 제작하였고 열증착 방법으로 Si (100) 및 유리(corning glass, 7059) 기판위에 200 nm 두께로 박막을 증착하였다. 비정질 박막의 결정화속도를 평가하기 위해서 658 nm의 LD가 장착된 나노-펄스 스캐너를 이용하여 power; 1~17mW, pulse duration; 10~460 ns의 범위에서 각 조성의 상변화에 따른 반사도 차이를 측정, 비교 분석하였다. 또한 각각의 박막을 $100^{\circ}C$ 에서 $300^{\circ}C$까지 $50^{\circ}C$ 간격으로 $N_2$ 분위기에서 1시간동안 열처리 한 후 XRD와 UV-Vis-NIR spectrophotometer를 사용하여 각 상의 구조분석 및 광학적 특성을 분석하였으며, 4-point probe로 면저항을 측정하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.931-936
• /
• 2018

We designed an x-band radar for motion detector using a frequency tunable hairpin ring resonator. The proposed doppler radar sensor can vary the oscillation frequency by applying a hairpin resonator using a varactor diode to the oscillator, and this can also reduce the size by transmitting and receiving a signal from Tx/Rx dual antenna. The fabricated doppler radar sensor was fabricated in $30{\times}24mm$, and it was confirmed that the pulse width difference occurred according to the distance from the object. The measurement results showed oscillation at 10.525GHz. We confirmed that it is enough to use as radar for motion detection from the measured results.

• Journal of Biosystems Engineering
• /
• v.25 no.5
• /
• pp.351-358
• /
• 2000

This study was conducted to develop a speed control system of a DC motor which drove a barley seeder mounted on a combine harvester. Barley seeder mounted on a combine has been known to reduce labor and cost of barley cultivation. However, development of the seeder has been unsuccessful because the combine, a dedicated rice and barley harvester has not enough space and proper power take-off for barley seeder. To develop a barley seeder, small powered motor speed controller was required. A proximity sensor for detecting working speed of the combine and a programmable one board microprocessor was used to develope a control system. Motor parameters and motor constant, relationship between seeding rate, motor speed, groove volumes of a tested roller, torque were measured. The proximity sensor sent a frequency signal to the microprocessor. In laboratory experiments, the excitation voltage of the motor was shown not to be proportional to the size of pulse width (duty ratio). A table transforming frequency signal, that represented for working speed to proper pulse width was developed from seeding rate experiments. However, seeding rate at low frequency signal was not proportional to the working speed. Seeding rate control proportional to the frequency signal was achieved by shifting of the frequency signal.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.286-287
• /
• 2007

본 논문에서는 최근 유체소자 재료로써 많이 사용되고 있는 polymethyl methacrylate (PMMA)의 레이저 직접식각에 관한 특성을 나타내었다. 식각을 위한 레이저 원으로 기본파가 1064 nm, 반복율이 10 Hz인 Nd:YAG 레이저의 4고조파 성분 ($\lambda$=266 nm)을 사용하였다. X-Y-Z 축으로 이동 가능한 스테이지의 수평 이동속도를 변화시키며, 표면으로 조사되는 펄스 수를 제어하였다. 식각 후 광학현미경으로 식각 단면을 조사하여 식각 깊이와 폭을 측정하였다. 측정된 식각 깊이로부터 식각률을 계산하고, 그 값과 레이저 빔 밀도와의 관계를 알아보았다. 그 결과 시료 표면에 조사되는 레이저 빔 밀도의 로그값과 선형적인 관계를 갖는 것을 확인할 수 있었다. 또한 주사전자현미경을 이용하여 채널 형상 및 채널 내벽을 관찰하였다. 마이크로 채널 내벽에 식각 과정에서 발생한 생성물의 제거를 위해, 레이저 식각과 함께 질소가스 블로잉을 해주었다. 질소 블로잉 압력 1500 torr에서 식각 잔유물이 제거된 내벽을 볼 수 있었다. 실험결과, Nd:YAG 4고조파를 이용하여 PMMA 기판상에 유체 이동을 위한 마이크로 채널을 형성시킬 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.710-710
• /
• 2012

구형펄스모형(Rectangular Pulse Model)에서 반영하지 못하는 강우의 군집특성을 잘 반영하는 NSRPM(Neyman-Scott Rectangular Pulse Model) 강우생성 모형은 수자원 분야에 널리 쓰이고 있다. 일반적으로 NSRPM의 5개의 매개변수를 추정하는 최적화기법으로 DFP(Davidon-Fletcher-Powell)과 유전자알고리즘(Genetic Algorithm)을 사용하고 있다. 그러나 DFP는 주어진 초기 값에 따라 민감하며 각 반복 단계마다 헤시안행렬(Hessian Matrix)을 계산하여야 하며 추정된 전체의 해가 국지해에 수렴 할 수 있는 단점이 있다. 유전자 알고리즘을 DFP와 다르게 헤시안 행렬을 사용하지 않고 최적화를 할 수 있다는 장점이 있으나 시간이 오래 걸리는 단점이 있다. 이에 본 연구에서는 이러한 단점을 보완, 강화 하기위해서 최적화 기법으로 반복 단계마다 미분계산이 필요하지 않고 빠른 속도로 계산이 가능한 Nelder-Mead 알고리즘 이용하여 NSRPM매개변수를 추정하고 정확도를 비교하였다. 표 1은 각 기법을 이용하여 추정된 매개변수를 이용하여 생성한 강우의 통계특성과 관측된 통계특성의 상대오차를 나타낸 것이다. 괄호 안 숫자는 중첩되지 않는 누적시간을 나타낸다. 상대오차는 다음과 같다(식 1). 분석결과 Nelder-Mead 기법이 1시간의 평균, 공분산과 6시간 분산 등 전체적으로 GA, DFP보다 높은 정확도를 보였다.

• Journal of Welding and Joining
• /
• v.22 no.1
• /
• pp.71-76
• /
• 2004

In the standpoint of the arc pressure, the effects of the filler wire feed rate on the penetration was investigated in this study. The pure Ar gas was used as a shield gas and the parameters investigated were the welding current and the filler wire feed rate. By making the experiment on the arc pressure, we could know that the arc pressure was fluctuated as the depth-into-arc of the tungsten rod. Instead of the filler wire, the tungsten rod was supplied into the molten pool to make this experiment. Because the filler wire melted in arc and then we couldn't measure the arc pressure. So, the tungsten rod - the highest melting point - was used. According to the depth-into-arc of the tungsten rod, the arc pressure could be measured by using the manometer. It was proved that the arc pressure got higher as the wire feed rate was slow. It is reported the arc pressure is proportion to welding voltage and the square of welding current. But, in the filler wire TIG welding, we could blow that arc pressure was fluctuated as the depth-into-arc of filler wire was changed. We could measure the arc pressure by the variation of the filler wire feed rate and could verify that it affected bead shape and penetration.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.37-44
• /
• 2021

This study is implemented as a sensor-less position controller capable of multi-turn detection to replace the expensive absolute encoder used in the turret servo system. For sensor-less control, the position information of the rotor is essential. For this, a magnetic flux estimator was implemented from the mathematical model of IPMSM used in the turret servo system. The position of the rotor and the angular velocity of the rotor were obtained using the rotor magnetic flux calculated from the magnetic flux estimator. Using the zero-crossing technique, one pulse was generated for each rotation of the estimated rotor magnetic flux to measure the number of multi-turns. Simulation and experiment results confirmed the usefulness of the proposed method.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.97-102
• /
• 2015

The long line fishing machine is combined with motor and two disc rollers has used on the small size fishing-boat under 1 ton located in near Jeollanam-do seaside. The long line fishing motor is controlled only one direction because the fishing line is loaded heavily at pulling up. On this paper we made the long line fishing 400W power motor controller which it was usually applied under 1 ton fishing boat, and designed the controller using PWM chip, Half bridge driver and MOSFET for one direction motor control. Furthermore some user convenience devices were added like battery indicator and safety protection circuit for battery overdischarge and battery source wire mismatch connection. So we protected the battery from overdicharging when the battery voltage was below 11.5V and fishermen didn't need to worry about source lines misconnection anymore. We confirmed the test version of controller was the good working condition at land and sea.