• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.111-112
• /
• 2017

최근 중소 테마파크들은 방문객의 감소로 인한 운영의 어려움을 겪고 있다. 새로운 어트랙션의 도입 및 테마파크의 리뉴얼을 통해 방문객 증가를 유도하기에는 천문학적인 비용이 소요된다. 이런 비용 소모는 운영 업체의 입장에서 부담하기 쉽지 않은 구조로 새로운 방법으로 방문객의 재방문률을 높일 수 있는 방안이 필요하다. 대표적인 방안으로 최근 높은 관심으로 인해 관련 기술 및 연구가 활발히 진행되고 있는 VR 시스템의 어트랙션 적용이 있다. 많은 움직임이 없고 안정적인 속도로 운영되는 어트랙션에 VR의 콘텐츠를 적용하여 사용자의 탑승률을 높이고 이로 인해 재방문률 또한 증가 시킬 수 있을 것으로 사료되어 많은 접근이 시도되고 있다. 이 논문에서는 어트랙션의 탑승자에게 몰입감 높은 VR 콘텐츠 제공을 위해 탑승한 어트랙션의 움직임과 VR영상을 동기화 하는 매칭 모듈에 대해 제안한다. 제안하는 모듈은 가속도 센서의 움직임에 따라 1차 적분하여 속도를 산출하고 이를 2차 적분하여 거리를 산출한다. 기존의 가속도 센서를 통한 이동거리 판단에는 칼만 필터를 적용한 오차 보정, 다분화 사다리꼴 적분 등의 연산이 필요하지만 본 논문의 고정 어트랙션에서는 탑승체의 방향이 결정되어 있어 최소화된 연산으로 정확한 이동거리를 판단할 수 있을 것으로 사료된다.

• 전자공학회논문지 IE
• /
• v.45 no.4
• /
• pp.60-67
• /
• 2008

Skin color is a very important information for an automatic face recognition. In this paper, we proposed a skin region extraction method using color information and skin color model. We use the adaptive lighting compensation technique for improved performance of skin region extraction. Also, using an preprocessing filter, normally large areas of easily distinct non skin pixels, are eliminated from further processing. And we use the modified ST color space, where undesired effects are reduced and the skin color distribution fits better than others color space. Experimental results show that the proposed method has better performance than the conventional methods, and reduces processing time by $35{\sim}40%$ on average.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1082-1090
• /
• 2009

Peak expiratory flow rate(PEF) is a very important diagnostic parameter obtained from the forced vital capacity(FVC) test. The expiratory flow rate increases during the short initial time period and may cause measurement error in PEF particularly due to non-ideal dynamic characteristic of the transducer. The present study evaluated the initial rise slope($S_r$) on the flow rate signal to compensate the transducer output data. The 26 standard signals recommended by the American Thoracic Society(ATS) were generated and flown through the velocity-type respiratory air flow transducer with simultaneously acquiring the transducer output signal. Most PEF and the corresponding output($N_{PEF}$) were well fitted into a quadratic equation with a high enough correlation coefficient of 0.9997. But only two(ATS#2 and 26) signals resulted significant deviation of $N_{PEF}$ with relative errors>10%. The relationship between the relative error in $N_{PEF}$ and $S_r$ was found to be linear, based on which $N_{PEF}$ data were compensated. As a result, the 99% confidence interval of PEF error was turned out to be approximately 2.5%, which was less than a quarter of the upper limit of 10% recommended by ATS. Therefore, the present compensation technique was proved to be very accurate, complying the international standards of ATS, which would be useful to calibrate respiratory air flow transducers.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.941-950
• /
• 2008

The quality of projector output image is influenced by the surrounding conditions such as the shape and color of screen, and environmental light. Therefore, techniques that ensure desirable image quality, regardless of such surrounding conditions, have been in demand and are being steadily developed. Among the techniques, radiometric compensation is a representative one. In general, radiometric compensation is achieved by measuring the color of the screen and environmental light based on an analysis of camera image of projector output image and then adjusting the color of projector input image in a pixel-wise manner. This process is not time-consuming for small sizes of images but the speed of the process drops linearly with respect to image size. In large sizes of images, therefore, reducing the time required for performing the process becomes a critical problem. Therefore, this paper proposes a fast radiometric compensation method. The method uses color filters for eliminating the color mixing between projector and camera because the speed of radiometric compensation depends mainly on measuring color mixing between projector and camera. By using color filters, there is no need to measure the color mixing. Through experiments, the proposed method improved the compensation speed by 44 percent while maintaining the projector output image quality. This method is expected to be a key technique for widespread use of projectors for large-scale and high-quality display.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.1-11
• /
• 2008

This work proposes a 15b 50MS/s CMOS pipeline ADC based on digital code-error calibration. The proposed ADC adopts a four-stage pipeline architecture to minimize power consumption and die area and employs a digital calibration technique in the front-end stage MDAC without any modification of critical analog circuits. The front-end MDAC code errors due to device mismatch are measured by un-calibrated back-end three stages and stored in memory. During normal conversion, the stored code errors are recalled for code-error calibration in the digital domain. The signal insensitive 3-D fully symmetric layout technique in three MDACs is employed to achieve a high matching accuracy and to measure the mismatch error of the front-end stage more exactly. The prototype ADC in a 0.18um CMOS process demonstrates a measured DNL and INL within 0.78LSB and 3.28LSB. The ADC, with an active die area of $4.2mm^2$, shows a maximum SNDR and SFDR of 67.2dB and 79.5dB, respectively, and a power consumption of 225mW at 2.5V and 50MS/s.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.305-315
• /
• 2011

A total of 864 measurements for P- and S- wave velocity of acrylic and stainless steel core samples have been performed with respect to their lengths and axial load applied. S-wave velocity measurement was much harder than P-wave velocity, so that it showed higher deviation in measured S-wave velocity with respect to repeated measurement, length of the cores, and the axial load applied. Velocity measurements for acrylic cores showed more stable and less than half of the variation between the measurements than the stainless steel cores. This seems to be come from better coupling between the transducers and acrylic cores than stainless cores, and from larger value of the first arrival time in a similar system noise environments. From the analysis of the 864 measurements, it is recommended that the length of the core be 60 ~ 90 mm, axial load between 20 kg (27.7 $N/cm^2$) and 30 kg (41.6 $N/cm^2$) for measurement of wave velocity of the acrylic and stainless steel cores. Especially for measuring S-wave velocity of stainless steel core, core length should be less than 50 mm, otherwise it will be affected by mode conversion or others. These results can be used in measurement and correction for system delay in wave velocity measurement for rock cores.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.37-45
• /
• 2006

Velocity structures were defined in the vicinty of the 140-m deep test borehole in the pungam basin through simultaneous inversion of surface seismic refraction and far-ofset VSP traveltime data. Seismicenergy generated at the surface by a seisgun was recorded both at 42 surface locations at 3-m intervalsalong the profiles in the N20E and its orthogonal directions and at 71 m depth in the borehole. Forthe ofset VSP study, seismic energy was generated by a 5 kg sledgehamer at the surface in the horizontal ofset range of -19.5∼+19.5 m from the borehole. The seismic signals were detected at 9∼99 m depths with 1∼2 m intervals and recorded for 204 ms per shot. After shot static corrections,first-arrival times picked from both the surface refraction and borehole records were simultaneouslyinverted to yield velocity tomograms. The tomograms indicate that a 1.5 m thick soil layer with velocities les than 500 m/s overlies basements having a velocity range of 3,067 ∼5,717 m/s. Within the basements,∼4 m and deeper than 71 m. The high-velocit yzones may be due to conglomerates intercalated with sandstones and siltstones. No evidence for large-scale fracture zones or faults is detected near the borehole

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.3 s.58
• /
• pp.599-608
• /
• 1997

We studied on change of lens accommodation and pupil light reflex caused by VDT work in six women and compared them with those of other office works. The results were as follows. 1. In VDT work the accommodation contraction velocity decreased during the first 2-hr VDT task, then recovered markedly by the end of the one-hour lunch break, and decreased again by the end of the 2nd 2-hr VDT task. Changes of relaxation velocity showed similar pattern although it was less typical than that of contraction velocity 2. There was no marked change in accommodation contraction velocity and amplitude of accommodation in general office work and near-distance office work, and in the near-distance office work accommodation relaxation velocity decreased according to work load without recovery after lunch break. 3. Initial pupil diameter, initial pupil area of light reflex decreased significantly during VDT task only in VDT work and didn't recover after lunch break. These results suggest possibility that changes of accommodation contraction velocity, accommodation relaxation velocity, near point distance, and pupil diameter and area are useful in evaluating characteristics of VDT work. For this, more research adjusted individual differences, circadian rhythm, emotional stress needs.

• Applied Biological Chemistry
• /
• v.32 no.2
• /
• pp.79-84
• /
• 1989

Initial adsorption rates of brown and milled rices at relative humidity of $57{\sim}86%$ were examined at $25^{\circ}C$. The adsorption equations at RH 75% for brown and milled rices were expressed as: log($d{\omega}/dt{\times}10^{3}$)=-0.8108 log t+3.0347 and log($d{\omega}/dt{\times}10^{3}$)=0.8451 log t+3.0087, respectively, where ${\omega}$ is the moisture content(%, db) and t is storage time (hr). The moisture content at RH $57{\sim}86%$ could be calculated from above equations using a conversion factor for each RH.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.3
• /
• pp.185-191
• /
• 1990

A study on the characteristics of phosphorus sedimentation in Nakdong Estuary Barrage was conducted in June and July, 1989. Cylindric type sediment trap was designed for collecting of downward material. Downward flux and settling velocity of downward material were $296g/m^2/d$, 1.25m/hr in mid-layer and $955g/m^2/d$, 3.31m/hr in bottom-layer, respectively Downward flux and settling velocity of phosphorus were $0.64g/m^2/d$, 0.85m/hr in mid-layer and $1.97g/m^2/d$, 1.89m/hr in bottom-layer, respectively. Fractional composition of organic phophorus in downward material was $51.9\%$ in mid-layer water and $48.3\%$ in bottom-layer water. According to the result of this study, sedimentation of phosphorus plays an important role as a sinking effect in Nakdong Estuary Barrage.