• Journal of Astronomy and Space Sciences
• /
• v.20 no.2
• /
• pp.153-162
• /
• 2003

Recently, we have reconstructed LX-200 12inch telescope system for tracking and observing man-made space object. Motor, motor driver and motion controller were up-graded for getting faster respond characteristic and active control available. Also, command signal was offered to the PID controller into motor driver as computed real orbiting information of objects using PC, and it's control period of command signal was reduced to the 20ms. As the result, slew speed of the mount system was in proved up to $18^{\circ}/sec$ and respond speed of the system was faster than that of commercial system. Also, flipping state of image observed could be minimized by the up-graded system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.12
• /
• pp.995-1006
• /
• 1989

If robots have the ability to track the parts on a moving conveyor belt, the efficiency of the manipulation tasks will be increased. This paper presents a motion planning algorithm for conveyor tracking. Tracking trajectory of a robot manipulator is determined by belt speed, initial part position, and initial robot position. Torque limit, maximum velocity, maximum acceleration and maximum jerk are also taken into account. To obtain the tracking solution, the problem is converted to the linear quadratic tracking problem. We describe the manipulator dynamics as second order state equation using parametric functions. Constraints on torques and smoothness are converted to those on input and state variables. The solution of the state equation which minimizes the performance index is obtained by dynamic programming method. Numerical examples are then presented to demonstrate the utility of the motion planning method developed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.49-57
• /
• 2003

In this paper, is proposed an anti-swing control algorithm for the automation of overhead crane. The algorithm consists of three parts, the FCL with compensatory FLC which generates acceleration, velocity and position reference to reduce swing angle and acceleration feedback controller which feedback control errors. Especially the algorithm dose not need angular sensor which detect swing angle of payload and requires high cost. By the simulation study and experiment with prototype crane, we showed the usefulness of the proposed algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.995-1001
• /
• 2012

This paper compares the performance of several tracking filters, namely, alpha-beta filter, Kalman filter and TBM tracking filter for ballistic target tracking problem using multi-function radar. Every of three tracking filters suggested was tested on simulator developed in accordance with TBM trajectory and MFR RSP measurement. The result shows the method using TBM tracking filter gives 75.3 % decreased velocity RMS error than alpha-beta filter. After initialization, the RMS error of range and velocity of the proposed filter is also smaller than the Kalman filter. Finally the proposed filter is suitable for high-speed TBM tracking due to the stable angle tracking accuracy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.947-950
• /
• 2005

For revolving and elevating a turret of a tank, we substitute an existing oil pressure system with an electric system using a motor and applied the vector control method to this system. A switching method of an inverter for providing desired sinusoidal current to each phase of a motor, we adopted min-max pulse width modulation method which takes less computation time, rather than space vector pulse width modulation method. We designed a digital filter and applied it to the control system. Developed current controller is verified it's performance through a current control test, speed control test, frequency response and tracking a profile of speed test.

• Journal of Biomedical Engineering Research
• /
• v.20 no.5
• /
• pp.587-592
• /
• 1999

압력측정시스템은 입각기동안 동적압력분포를 성공적으로 측정할 수 있으나 하중수용기-중간입각기, 말기입각기-전유각기의 전환기들에 대해서는 운동분석시스템을 사용하지않고는 정확한 정의가 불가능하다. 따라서 저자들은 수평자유보행 시 압력중심의 이동을 이해하기 위해서 정상적인 발을 가진 20-30대 성인남자 78명을 대상으로 동작분석과발바닥 압력측정을 동시에 수행하였다. 결과로 하중반응기-중간입각기 전환시기의 발바닥 압력중심점은 후족부와 중족부의 경계선에서 앞쪽으로 1.9$\pm$1.5frame(32$\pm$24msec)에 위치하였으며 말기입각기-전유각기 전환시기에는 중족골두 최대 압력점의 앞쪽으로 2.3$\pm$2.0 frame(38$\pm$33msec)에 위치하였다. 정상수평보행에 있어서 최초접지 순간 압력중심은 전방으로 빠르게 이동하다가 바로 급속히 감소하여 하중반응기-중간입각기의 전환시기에는 작은 속도로 이동하였다. 압력중심의 이동속도는 그 후 다시 서서히 증가하다가 전체 보행주기의 25% 전후에서 서서히 감소하여 비교적 일정하다가 말기입각기-전유각기의 전환시점에서 다시 급격한 증가를 보였다. 족부질환과 보행특성을 판단하는데 있어서 압력중심의 이동궤적은 매우 유용한 인자가 될 것으로 기대된다. 본 연구를 통해서 압력측정시스템만으로는 정의할 수 없었던 두 전환기인 하중반응기-중간입각기, 말기입각기-전유각기를 결정할 수있게 되었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.991-1000
• /
• 2019

The flying-disc game has started since 1940. It has been spreading rapidly in Korea since 2007, mainly in elementary schools. Additionally, as sports science has been developed, research on flying discs has been continued to build a monitoring system for technological improvement and efficiency. In this paper, we acquire information on the user's flying-disc using 9-axis motion sensor and GPS. Then we propose a method for wireless transmission using Bluetooth 5.0. Specifically, the HW platform was designed and implemented not only to monitor a real-time data but also to compare and analyze rotational speed, flight trajectory, and a count of disc rotation through post-processing.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1027-1030
• /
• 2011

휴머노이드 로봇 중 초상화를 그리는 로봇이 있지만 다양한 영상을 입력받아 명암 및 그림자까지 그림을 그리는 로봇은 흔하지 않다. 기존의 화가로봇들은 사용자의 얼굴을 영상으로 입력받아 윤곽선만 추출하여 그리는 방식으로, 입력된 영상으로부터 로봇 암을 제어하는 과정에서 제대로 동기화가 이뤄지지 못해 드로잉 속도가 느리고 원본 영상과 비교 시 차이가 많이 난다. 본 연구에서는 입력된 영상으로부터 명암과 그림자를 인식하여 표현해 줌으로써 입체감 있는 그림의 드로잉이 가능하다. 또한, 로봇 암의 미세한 컨트롤을 통해 드로잉 선 두께를 제어함으로써 자연스러운 그림을 그리고, 드로잉 속도가 향상되어 정확도를 높일 수 있게 하는 휴리스틱 암 제어 기술을 제안한다. 이를 구현하기 위해서는 영상으로부터 명암, 그림자의 농도에 따라 레벨을 결정하고, 레벨을 바탕으로 주변 명암 픽셀들을 평활화 하여 좌표 집합을 추출한다. 좌표 값들로 부터 유효 궤적을 분석하여 로봇 암이 이동할 경로를 추출하고, 효율적인 드로잉 기법을 통해 명암을 표현하여 드로잉하려 한다.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.878-886
• /
• 2009

This paper proposes an optimal algorithm for generating a train speed profile giving optimal energy efficiency based on GA (Genetic Algorithm) and shows its effectiveness with simulations. After simplifying the train operation mode to a maximum traction, a coasting and a maximum breaking, adjusting the coasting point to minimize the train consuming energy is the basic scheme. Satisfying the two constraints, running distance and running time between two stations, a coasting point is determined by GA with a fitness function consisting of a target running time. Simulation results have shown that multiple coasting points could exist satisfying both of the two constraints. After figuring out consumed energies according to the multiple coasting points, an optimal train speed profile with a coasting point giving the smallest consumed energy has been selected. Simulation blocks for the train performance simulation and GA have been designed with the Simulink.

• Korean Journal of Materials Research
• /
• v.7 no.4
• /
• pp.339-346
• /
• 1997

회전 불밀에 있어서 볼의 운동을 비선형 spring과 비선형 deshpot로 구성된 Kelvin모델을 사용한 DEM(Distinct Element Method;개별요소법)에 의하여 2차원으로 해석하였다. 모델에 있어서 점성계수는 볼과 밀벽사이의 반발실험 데이타로 부터 결정하였다. 각볼의 동적인 운동은 비선형 점탄성과 Newton의 운동법칙를 기초로하여 모사되었다. 밀이 회전하는 동안 볼의 궤적과 동적인 운동은 실제 실험에 의한 밀내에서의 볼의 운동고 잘 일치하였다. 본 연구에서 제안된 모델 시뮬레이션은 회전 볼밀내의 실제의 3차원인 볼의 운동에 대한 해석에 중요한 단서가 될 수 있었다. 볼의 운동고 운동에너지는 회전 볼밀의 속도와 볼의 충진율에 의해 크게 영향을 받았다.