• Cement Symposium
• /
• no.24
• /
• pp.54-59
• /
• 1996

• 레미콘
• /
• no.7 s.68
• /
• pp.52-59
• /
• 2001

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3988-3997
• /
• 2010

Shotcrete was a mortar or concrete that is pneumatically projected at high velocity onto a subject. It has been applied for tunneling, underground big-spaces, slope stabilization. Shotcrete is increasing use in structure repair. The dry-mix shotcrete require a smaller equipment, easy maintenance, possible of very-earlystrength materials than wet-mix shotcrete, which make this process attractive and economic for structural repairs. It is common practice core compressive strength to the dry-mix shotcrete quality control. This test is very difficult estimating eraly-strength of Very-Early-Strength Dry-Mix Shotcrete. The purpose of this research was to analyze the correlation of test results among cube test, core test, pullout test and maturity. The correlationship analysis of test results among cube test, core test, pullout test and maturity showed more than 90%.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.450-457
• /
• 2020

In this study, engineering characteristics such as flowability, segregation and compressive strength by age to derive fast hardening material mixing proportion using excavated soil. And based on optimal mixing proportion, field simulation experiment conducted in laboratory to examine the effectiveness of the method such as kelly ball drop test and soil penetration test for reviewing the following process. As as a result of evaluation, in case of kelly ball drop test and soil penetration test were securing the following process initiation time 3 hours after place CLSM. As results of these assessments, kelly ball drop test and soil penetration test were applicable for revewing following process in construction field besides unconfined compressive strength method.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.3
• /
• pp.13-20
• /
• 2015

Inappropriate backfill material and poor compaction cause the damage to sewer and ground settlement. To deal with such problem, flowable backfill material has attracted attention recently. A basic study was conducted in a bid to obtain optimum mixing ratio of backfill material with the characteristics of rapid hardening, pseudo-plasticity, flowability and anti washout ability and enhance the cost efficiency of backfill material. Through the test of optimal mixing ratio of rapid hardening, evaluation of optimal mixing ratio of backfill material was conducted. As a result, required performance as well as cost efficiency could be achieved by adjusting plasticizer even in case of increasing W/M of the paste of rapid hardening to 100%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.145-151
• /
• 2019

The Physical performance of use materials was evaluated to improve durability of fast-paced repair mortar used at rapid construction sites. The fastening performance and basic performance were evaluated by substituting ferronickel grinding slag residues, rapid settlement, and EVA-based polymer for mortar. As a result, the compressive strength, flexural strength and adhesion strength were increased due to the use of FS Fine Aggregate and RS Fine Aggregate. The chloride ion promotion test of fast-polymer mortar kept the chloride inhibitory performance from 7 days to 28 days when fNS was used less than 50%. Durability degradation due to the use of FS Fine Aggregate and RS Fine Aggregate has not been found, and it is believed that further consideration of economic and long-term durability will be required for use as alternative Aggregate for construction and civil engineering.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.30-40
• /
• 2012

Electric arc furnace slag is made in ironworks during steel refining, it is been increasing chemical and physical resistibility using ageing method of unstable state of melting steel slag for using concrete's fine aggregates. Which is been changing stable molecular structure of aggregates, it restrains moving of ion and molecule. In Korea, KS F 4571 has been prepared for using the electric arc furnace oxidizing slag to concrete aggregates(EFS). In this study, Electric arc furnace oxidizing slag is used in the PRCC(Polymer Rapid setting Cement Concrete) which is applied a bridge pavement of rehabilitation, largely. The results showed that the increment of compressive strength development by 10- 20%. The flexural strength of EFS-Con increased greatly as the electric arc furnace oxidizing slag changed. The compressive strength and flexural strength developed enough for opening the overlayed EFS-Con to the traffic after 4 hours of EFS-Con placement. The permeability of EFS-Con was evaluated as negligible due to its very low charge passed. Thus, EFS-Con could be used at repairing or overlaying the concrete at fast-track job sites.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.135-141
• /
• 2013

In this study, to improve the early-age compressive strength of mortar, the compressive strength tests of mortar mixed smart BFS powder added powder of rapid setting additives milled by processing, using functional grinding aid, the power-typed rapid setting cement clinker developed by sintering industrial waste and by-products with much CaO-$SiO_2-Al_2O_3$ to cement were performed. From the tests, the followings are found that (1) for BFS early-age strength improvement test (Series I): early-age strength improvement of BFS mixed rapid setting additive milled after adding functional grinding aid, when the clinker is milled, is superior and (2) for OPC early-age strength improvement test (Series II): case of additive mixed rapid setting powder typed activator milled after adding functional grinding aid to Clinker-C showed the higher compressive strength.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.61-63
• /
• 2020

본 논문에서는 2개의 브러쉬리스 AC 모터로 구동하는 레일 트랙션 시스템의 설계와 위치제어 방법을 제시한다. 제안된 시스템의 설계에서 롤러와 레일 사이의 미끄러짐 효과를 줄이기 위해 롤러가 레일의 상단 표면에 위치하는 구조로 설계하였다. 레일의 지지대가 상단 중앙에 위치해 있어 두 개의 날개 형태로 롤러가 제작되었으며, 각각의 롤러는 BLAC 모터와 연결되어 있다. 위치제어의 성능을 높이기 위해 코사인 가감속 패턴을 활용하여 구동 시 전류와 속도의 리플을 억제한다. 두 모터의 비선형적인 부하에 의한 밸런스오차를 줄이기 위해 실시간 위치 변화의 밸런스 제어를 제안한다. 제안된 듀얼 BLAC 모터로 구동하는 트랙선 시스템의 위치제어성능은 비교실험을 통해 검증되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.253-253
• /
• 2021

천수방정식에 대한 불연속 갤러킨 기법 (DG) 모형은 주로 양해법 기반으로 개발되어 적용되어 왔으나, 바닥마찰항의 처리, 과도한 CFL 조건 등의 불리한 점이 지적되어 왔으며, 이로 인하여 실제 적용에서 FDM, FEM 등 다른 고전적인 수치기법과 비교하여 경쟁력을 갖기 어려웠다. 이에 대한 대안으로써, 최근, 불연속 갤러킨 기법에 대한 음해법 기반의 모형이 연구되고 있으며, 다소 복잡한 알고리즘에도 불구하고 적용이 확대되고 있다. 또한, 널리 알려진 바와 같이, 천수방정식의 실제 하도에 대한 적용에 있어 문제점 중 하나는 나비에-스토크스 방정식으로부터 유도할 때 사용된 정수압 가정으로 인하여, 하도의 계단과 같은 불연속 지형에 적용이 용이하지 않다는 것이다. 본 연구에서는 기존에 개발된 불연속 갤러킨 음해법에 불연속 지형의 해석을 위한 표면경사법(surface gradient method)을 결합하여 이러한 문제에 효과적으로 대응할 수 있는 기법을 제시하였다. 개발된 모형의 검증을 위하여, 제방 등 하도 구조물 위의 장주기 조석흐름, 홍수파, 계단 등을 포함하는 댐 붕괴류 모의에 적용하고 실용적인 기능성을 검증하였다. 향후 구조물이 많은 국내 하천에 적용이 가능할 것으로 사료된다.