• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.286-289
• /
• 2006

To get the better efficiency in Korean type wind characteristics, a new wind turbine blade was developed with some structural, vibrational, and aero-elastic analysis for the design of the full-scale blade. A series of full domestic technology from design to manufacturing was created and used in the middle of the development of nelv wind blade. And it was equipped and measured at the wind test side in the Jeju island. After test, it is verified that the blade has the regular capacity of 10kW at the air velocity of 10m/s. And it shows better capacity in the low air-velocity compared to the imported blade. therefore it can be made by only domestic technology, and used for the domestic wind distribution with the better power generation.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.205-212
• /
• 2012

This paper proposes the fuzzy logic based variable step-size MPPT (Maximum Power Point Tracking) method for the stability at the steady state and the improvement of the transient response in the wind power system. If the change value of duty ratio is set on stability of the steady state, MPPT control traces to maximum power point slowly. And if the change value is set on improvement of the transient response, the system output oscillates at the maximum power point. By adjusting the step size with fuzzy logic, it can be improved the MPPT response speed and stability at steady state when MPPT control is performed to track the maximum power point. The effectiveness of the proposed method has been verified by simulations and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.807-809
• /
• 2001

Permanent-magnet generators have been used for wind turbines for many years. This paper deals with the AFPM(Axial - Flux Permanent Magnet) Generator with a high power-to-weight ratio, dedicated for small wind turbines. The designed and constructed generator as a prototype in this study is a slotless type AFPM Generator with Neodymium-Iron-Boron magnet rotor. Based on that construction, a magnetic circuit analysis of the generator is carried out. Some important equations covering its characteristics and construction are derived and its magnetic and electrical characteristics are investigated.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.59-64
• /
• 2015

This paper proposes an analysis and operation strategy of a grid-connected wind turbine system using a diode rectifier. The currents of generators are the same as that of a small wind turbine system. Therefore, the analysis of generator torque is required as opposed to an analysis of blade speed. In this paper, the appropriate MPPT control method is proposed to control generator torque. Usefulness of the proposed operation strategy is verified by simulations and experiments.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.125-130
• /
• 2004

This study proposes a development for the l-kW class small wind turbine system, which is applicable to relatively low wind speed region like Korea and has the variable pitch control mechanism. In the aerodynamic design of the wind turbine blade, parametric studies were carried out to determine an optimum aerodynamic configuration which is not only more efficient at low wind speed but whose diameter is not much larger than similar class other blades. A light composite structure, which can endure effectively various loads, was newly designed. In order to evaluate the structural design of the composite blade, the structural analysis was performed by the finite element method. Moreover both structural safety and aerodynamic performance were verified through the prototype test.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1688-1693
• /
• 2013

A small-scale wind power generation system with a switched-mode rectifier(SMR) is proposed. To simplify the converter circuit of the wind power generation system, the synchronous inductors of the permanent magnet synchronous generator(PMSG) replace the inductor for the boost converter. The sensorless maximum power point tracking(MPPT) control is carried out for the wind power generation system with the SMR. The proposed system is verified through the simulations and the experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.523-524
• /
• 2015

신재생 에너지는 발전 시 연료가 들지 않는다는 특징과 친환경적인 이유로 각광 받고 있다. 이러한 특징으로 인해 에너지 독립 계통을 구성하는 데 주요 역할을 한다. 풍력, 태양광, 에너지 저장 장치 등이 분산 전원으로서 계통을 구성하게 되는데, 낮은 효율과 높은 초기 설치비용으로 인해 디젤 발전기나 마이크로 터빈 등 소형 발전기를 예비 전력으로서 부착하는 경우가 대부분이다. 이러한 분산 전원들은 가격이 제각각이며 기존의 화석연료 발전기처럼 비용 함수 모델링이 어려워 경제적 분석이 어려웠다. 이 논문은 이러한 신재생 에너지를 사용한 독립 마이크로그리드를 경제적 관점에서 분석하는 것이 목적이다. 따라서 계통을 분석하는 가장 보편적인 방법인 최적 조류 계산(OPF, Optimal Power Flow)방법과 가격을 최소화하는 점을 찾는 경제급전(ED, Economic Dispatch)방법을 사용하였다. 두 가지 방법의 결과를 비교하여 발전 비용을 줄일 수 있는지에 대해 조사하였다. 7-Bus 가상 계통을 만들어 사용하였고, OPF와 ED의 발전 비용은 PowerFactory$^{(R)}$ 프로그램을 통해 시뮬레이션 하여 데이터를 얻었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.449-452
• /
• 2009

본 연구에서는 소형 플랩을 채용하여 능동하중제어를 이루고자하는 풍력 블레이드의 적용을 염두해 둔 에어포일 설계를 수행하였다. 블레이드 팁 부분에 플랩을 적용하고자 하는 경우 플랩의 구동장치, 연결 부위 등의 장치 설치를 위한 공간이 블레이드 내부에 필요하다. 이를 위하여 기존의 에어포일의 성능을 유지하면서 뒷전의 두께비가 증가된 에어포일 형상의 설계가 필요하다. 최적설계를 위하여는 MIGA(Multi- Island Genetic Algorithm)을 채용하였으며 에어포일의 성능 계산을 위하여는 Xfoil을 결합하였다. 또한 형상 생성을 위하여 Hick-Henne 형상 함수를 이용하였다. 위와 같은 방법으로 설계된 에어포일은 코드길이 85% 위치에서 두께비 6.3%,양항비 133을 가지게 되어 기본으로 설정한 DU180 에어포일에 비해 성능과 필요 두께비를 모두 능가하는 에어포일이 되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.130-134
• /
• 2005

The objectives of this study are to improve the aerodynamics performance on the down-wind blade system with folding type blade which consists of the folding type rotor blade, wind vane yawing stabilizer and a bevel gearbox. The aerodynamics performance for the new wind turbine system are compared with those of the conventional up-wind blade system. In addition to, a novel multi voltage inverter system is applied for reductions of harmonic.

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.1-7
• /
• 2008

Recently the wind energy has been alternatively used as a renewable energy resource instead of the mostly used fossil fuel due to its lack and environmental issues. This work is to propose a structural design and analysis procedure for development of the low noise 100W class small wind turbine system which will be applicable to relatively low speed region like Korea and for the domestic use. Structural analysis including load cases, stress, deformation, buckling, vibration and fatigue life was performed using the Finite Element Method, the load spectrum analysis and the Miner rule. In order to evaluate the designed structure, the structural test was carried out and its test results were compared with the estimated results. In addition, the blade should be safe from the impact damage due to FOD(Foreign Object Damage) including the bird strike. In order to analize the bird strike penomena on the blade, MSC. Dytran was used, and the applied method Arbitrary Lagrangian-Eulerian was evalud by comparison with the previous study results.