• Title/Summary/Keyword: 소형버스

Search Result 42, Processing Time 0.026 seconds

소형 상용차량 LPLi화 사업계획(안)

  • Korea LPGas Industry Association
    • LP가스
    • /
    • s.76
    • /
    • pp.62-68
    • /
    • 2001
  • 저공해 LPG청소차의 개발이 성공을 거둔데 이어 화물차와 마을버스, 소형 상용차량의 LPG화가 추진되고 있어 관심을 모으고 있다. SK가스에서 계획중인 소형 상용차량의 LPLi화 사업에 대해 알아본다.

  • PDF

A Study on Standardization of Data Bus for Modular Small Satellite (모듈화 소형위성의 Data Bus 표준화 방안 연구)

  • Jang, Yun-Uk;Chang, Young-Keun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.38 no.6
    • /
    • pp.620-628
    • /
    • 2010
  • Small satellites can be used for various space research and scientific or educational purposes due to advantages in small size, low-cost, and rapid development. Small Satellites have many advantages of application to Responsive Space. Compared to traditional larger satellites, however, Small satellites have many constraints due to limitations in size. Therefore, it is difficult to expect high performance. To approach maximum capability with minimal size, weight, and cost, standard modular platform of Small satellites is necessary. Modularity supports plug-and-play architecture. The result is Small satellites that can be combined quickly and reliably using plug-and-play mechanisms. For communication between modules, standard bus interface is needed. Controller Area Network(CAN) protocol is considered optimum data bus for modular Small satellite. CAN can be applied to data communication with high reliability. Hence, design optimization and simplification can also be expected. For ease of assembly and integration, modular design can be considered. This paper proposes development method for standardized modular Small satellites, and describes design of data interface based on CAN and a method of testing for modularity.

A Study on the Ramp Design of Small Buses for the Mobility Handicapped (교통약자를 위한 소형버스의 탑승구 디자인)

  • Lee, Jung-Hyun;Kim, In-Cheol
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.21 no.2
    • /
    • pp.214-220
    • /
    • 2012
  • About 12 million people of the mobility handicapped were increased by the end of 2009 year. Universal design concept has been implemented in developed countries. Since 2004 low-floor buses are in Korea. In this study, there is no provision for mobility handicapped and small buses that can be comfortable riding car ramp design presented. The gate of a small buses lowered height of 200mm. Install the ramp in the center of the ramp by an air cylinder moves from side to side. The slope of the ramp was controlled by a hinge. Air cylinder thin type applicable in the narrow space of the slide cylinder was used.

A Study on the Model Experimet and MLZ Model Analysis for Predicting Fire Behavier in Road Tunnel (도로터널에서의 화재성상 예측을 위한 축소모형실험 및 MLZ모델 분석에 관한 연구)

  • Han, Jung-Chul;Lee, Ju-Hee;Kwon, Young-Jin
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2012.04a
    • /
    • pp.294-297
    • /
    • 2012
  • 본 연구는 MLZ을 활용하여 도로터널의 다양한 화재시나리오별 화재성상예측을 목적으로 1/20 Scale 모형실험을 통하여 소형차, 버스화재 시 FAN의 작동 비작동, 소형차 2대 직렬 병렬화재, 소형차 2대+버스 혼합 화재실험을 바탕으로 FAN작동시 배기구 방향으로 고온의 열기층이 생성됨을 확인하였다. 축소모형실험과 MLZ 해석결과를 비교하여 화원으로부터의 약 20m 정도의 이격거리부분 온도가 유사하게 나타났고, 시간별 온도분포를 확인한 결과 플래시오버 이전단계에 피난계획을 세우는 단계에서 예측이 가능했다.

  • PDF

버스에어컨용 냉매압축기의 진보

  • 이원용
    • The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
    • /
    • v.31 no.11
    • /
    • pp.29-30
    • /
    • 2002
  • 현재 버스 에어컨용 압축기의 주류는 왕복동 크랭크식이 주류를 이루고 있고, 저진동, 저소음, 장착성 등이 고객의 요구에 일치되었다고 할수 있지만, 버스실내의 쾌적성에 대한 만족 기준은 갈수록 향상되어 압축기의 능력 향상과 동시에 진동, 소음의 저감이 요구되고 자동차 업계에서는 연비 개선이 최대 관심사로 부각되어지고 특히, 소형화, 경량화가 강력히 진행될 수 밖에 없는 현실이 도래되고 있다. 따라서 압축기 ON-OFF가 연비 및 진동 소음에 크게 영향을 미침에 따라 이의 개선을 위한 W형 6실린더 압축기 탑재가 증가되는 추세라 할 수 있다.

  • PDF

Development of a Finite Element Model for Crashworthiness Analysis of a Small-Sized Bus (소형버스 정면 충돌 특성 해석을 위한 유한요소 모델의 개발)

  • 김학덕;송주현;오재윤
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.10 no.1
    • /
    • pp.153-161
    • /
    • 2002
  • This paper develops a finite element model for crashworthiness analysis ova small-sized bus. The full vehicle finite element model is composed of 31,982 shell elements,599 beam elements,42 bar elements, and 34,204 nodes. The model uses four material models (such as elastic, elastic-plastic(steel), rigid. and elastic-plastic (rubber) material model) of PAM-CRASH. The model uses four contact types to define sliding interfaces in ten areas. A frontal crash test using an actual vehicle with 30mph velocity to a rigid barrier is carried out. Vehicle pulses at lower part of left and right b-pillar are measured, and deformed shapes of frame and driver seat's lower left area are photographed. A frontal crash simulation using the developed full vehicle finite element model is performed with PAM-CRASH installed in super computer SP2. The simulation is performed with the same conditions as the test. The measured vehicle pulses and photographed deformed shapes from the test are compared to ones from the simulation to validate the reliability of the developed model.

세계 타이어회사 현황

  • Korea Tire Manufacturers Association
    • The tire
    • /
    • s.187
    • /
    • pp.41-53
    • /
    • 1996
  • 이 자료는 Tire Business(1966. 8. 19)지가 전 세계를 7개 지역, 즉 북미(미국ㆍ캐나다), 중남미, 유럽, 아시아, 중동, 아프리카, 대양주로 나눈어 각국별 타이어회사 현황과 회사별 타이어공장 소재지, 공장별 생산능력 등을 개괄적으로 요약한 것이다. 일러두기. 종업원 수:직접 생산에 참여한 인원. 타이어 종류: 1-소형차용, 2-소형트럭용, 3-트럭ㆍ버스용, 4-농업기계용, 5-모터사이클용, 6-건설차량용, 7-산업차량용, 8-항공기용, 9-경주차량용. 타이어 구조: r-래디알 타이어, b-바이어스 타이어

  • PDF

세계 각국별 타이어회사 및 공장별 생산능력(2)

  • Lee, Won-Taek
    • The tire
    • /
    • s.175
    • /
    • pp.39-48
    • /
    • 1994
  • 이 자료는 Rubber & Plastics News(1994. 8. 15)지가 전 세계를 7개 지역, 즉 북미(미국ㆍ캐나다), 유럽, 아시아, 아프리카, 중동, 중남미, 대양주로 나누어 각국별 타이어회사 현황과 회사별 타이어공장 소재지, 공장별 생산능력 등을 개괄적으로 요약한 것이다. <일러두기> 종업원 수; 직접 생산에 참여한 인원, 타이어 종류; 1-소형차용, 2-소형트럭용, 3-트럭ㆍ버스용, 4-농업기계용, 5-모터사이클용, 6-건설차량용, 7-산업차량용, 8-항공기용, 9-경주차량용. 타이어 구조: r-래디알 타이어, b-바이어스 타이어

  • PDF

Development of a small avionics unit based on FPGA with soft CPU (소프트 CPU 내장형 FPGA 기반의 소형 전장품 개발)

  • Jeon, Sang-Woon
    • Aerospace Engineering and Technology
    • /
    • v.12 no.2
    • /
    • pp.131-139
    • /
    • 2013
  • This paper describes the design and implementation of a small avionics unit based on soft CPU. A small avionics unit is developed with the soft CPU which can be wholly implemented in FPGA using logic synthesis. Design and integration of a modular architecture for versatile, reconfigurable and re-adaptable is presented with the Nios-II processor. To gain modular architecture, both at main board and sub-board level, attention has been paid to the selection of interfaces and an adequate data and power bus.