• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.38-43
• /
• 2015

This paper describes a GPS signal generator that can generate multiple satellite signals in real time at the RF level. It realizes the verified software algorithm on a FPGA. The algorithm models orbits and environmental errors such as ionospheric and tropospheric multipath. The position of a simulated receiver is one of simulation parameters. The hardware which consists of a digital logic board and an analog board can generate 16 simulated satellites signals at the same time. The users can generate spoofing signals and jamming signals as well as satellite signals by using the windows-based control software. In addition, the software provides GIS-based simulation scenarios editing tools. We verified the generator by using commercial receivers. As an application, we configured generators as indoor positioning systems and tested them in a building. To improve the accuracy of indoor systems is our further study.

• The KIPS Transactions:PartA
• /
• v.19A no.3
• /
• pp.147-154
• /
• 2012

The higher thinking skills, such as creativity and problem-solving about a given problem, are difficult to assess and diagnose. For an accurate diagnosis of these higher thinking abilities, we need to fully observe learner's problem-solving process or learner's individual reports. However, in an online learning or virtual class environments, evaluation of learner's problem-solving process becomes more difficult to diagnose. The best way to solve this problem is through reporting by tracking learner's actions when he tries to solve a problem. In this study, we developed a module which can evaluate and diagnose student's problem-solving ability by tracking actions in MS-Office suite, which is used by students to solve a given problem. This module performs based on the learner's job history through user tracking. To evaluate the effectiveness of this diagnostic module, we conducted satisfaction survey from students who were preparing the actual MOS exams. As a result, eighty-one (81) of the participants were positive on the effectiveness of the learning system with the use of this module.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.709-718
• /
• 2005

To correspond with the unpredictable future tactical environment, Ive expanded the application of M&S(Modeling & Simulation) that is more scientific and more economic in a field of weapon system development process. This paper describes experience in development of ADSF(Air Defense Simulation Framework) that supports not only HLA(High Level Architecture) which is an international standard in M&S but also TCP/IP as well as real-time distributed simulation. ADSF has been applied to the M-SAM(Medium Range Surface to Air Missile) System Simulator, and satisfying test results through GPS(Global Positioning System) timer has been acquired. As a result, an ADSF which is able to support HLA and TCP/IP as veil as precise real-time simulation has been successfully made. we were in need or a real-time simulation engine to support Air Defense System Simulators that were consisted of several subsystems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.887-895
• /
• 2018

This paper presents a braking model that can be used to design the safety distance of a train control system and a train braking system to increase the volume of traffic. For the braking model, a train set (electric multiple unit composed 6 cars) was tested. The factors that can affect the braking characteristics include the friction coefficient, braking pressure, and regenerative braking. The braking pressure was classified into service and emergency braking and reflected the characteristics of the vehicle. The external force acting on the running railway car was tested in accordance with KS R 9217, and the running resistance of the train is presented in the form of a polynomial. The dynamic behavior of the train running on a straight flat line was simulated using UM 8.3. The results were validated with experimental data, and the results were reasonable. With the validated model, a stopping distance was determined according to the initial braking speed and compared with the deceleration braking model. In addition, a safety distance for the train control system could be changed according to the frictional coefficient limits. These results are expected to be useful for analyzing the dynamic behavior of trains, and for analyzing various railway environments and improving the braking performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.89-89
• /
• 2011

반도체 공정 등에서 $10^{-6}{\sim}10^{-8}$ mbar의 고진공 환경을 제공하기 위하여 사용되는 고진공 터보분자펌프 (Turbomolecular Pump, TMP)는 다층의 회전깃을 갖는 로터를 회전시켜 분자를 배출시키는 방식을 사용하는 진공펌프이다. 또한 최근에는 디스플레이 및 반도체 공정에서 높은 진공도뿐만 아니라, 높은 배기속도를 요구하는 추세에 따라, 터보 펌프와 드래그 펌프부분을 동시에 가지고 있어 상대적으로 작동 진공도 영역이 넓은 복합 분자펌프(Compound Turbomolecular Pump, CMP)의 활용도가 넓어지고 있다. 이러한 분자펌프가 장시간의 고속회전에 적합하도록 비접촉 방식인 자기부상 방식의 적용이 최근 거의 표준화 되어 있다. 자기베어링 시스템은 전자기력을 이용하여 자성체인 회전축을 부상지지 함으로써 비접촉 고속 회전이 가능하여 윤활이 용이하지 않은 진공 환경 등 가혹한 환경에 적합하며, 터보분자펌프는 자기베어링이 가장 널리 사용되고 있는 분야이기도 하다. 자기베어링 시스템의 설계는 크게 하드웨어와 소프트웨어로 나누어질 수 있는데, 하드웨어의 경우 전체 로터 시스템의 특성을 고려하여 설계되어야 하며, 주로 자기베어링 코어와 코일, 변위센서 및 전력 증폭 시스템 등의 기전적인 요소들이 이루어져 있다. 하드웨어 설계와 함께 제어시스템의 설계도 매우 중요하며, 이는 자기베어링 시스템이 불안정한 특성을 갖는 개루프계를 갖고 있으므로 안정화를 위한 능동제어 시스템이 필수적이며 진동제어 등 여러 가지 기능이 요구되기 때문이다. 본 논문에서는 이러한 자기부상형 고진공 복합분자펌프의 제어를 위한 선형제어시스템의 구성을 실제 시스템의 적용을 통하여 설명하였다. 각 제어기는 DSP 를 이용한 디지털 제어시스템으로 구성되었으며, 2,500 l/s 급의 복합 분자펌프 시작품에 적용하여 25,000 rpm 까지의 기본 성능시험을 수행하였으며, 발열 특성의 개선을 위한 비선형 제어기의 설계 사례에 대한 시뮬레이션 결과를 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.20-20
• /
• 2010

반도체 공정 등에서 10-6~10-8 Torr의 고진공 환경을 제공하기 위하여 사용되는 고진공 터보분자펌프 (Turbomolecular Pump, TMP)는 다층의 회전깃을 갖는 로터를 회전시켜 분자를 배출시키는 방식을 사용하는 진공펌프이다. 또한 최근에는 디스플레이 및 반도체 공정에서 높은 진공도뿐만 아니라, 높은 배기속도를 요구하는 추세에 따라, 터보 펌프와 드래그 펌프부분을 동시에 가지고 있어 상대적으로 작동 진공도 영역이 넓은 복합 분자펌프(Compound Turbomolecular Pump, CMP)의 활용도가 넓어지고 있다. 이러한 분자펌프가 장시간의 고속회전에 적합하도록 비접촉 방식인 자기부상 방식의 적용이 최근 거의 표준화되어 있다. 자기베어링 시스템은 전자기력을 이용하여 자성체인 회전축을 부상지지 함으로써 비접촉 고속 회전이 가능하여 윤활이 용이하지 않은 진공 환경 등 가혹한 환경에 적합하며, 터보분자펌프는 자기베어링이 가장 널리 사용되고 있는 분야이기도 하다. 자기베어링 시스템의 설계는 크게 하드웨어와 소프트웨어로 나누어질 수 있는데, 하드웨어의 경우 전체 로터 시스템의 특성을 고려하여 설계되어야 하며, 주로 자기베어링 코어와 코일, 변위센서 및 전력 증폭 시스템 등의 기전적인 요소들이 이루어져 있다. 하드웨어 설계와 함께 제어시스템의 설계도 매우 중요하며, 이는 자기베어링 시스템이 불안정한 특성을 갖는 개루프계를 갖고 있으므로 안정화를 위한 능동제어 시스템이 필수적이며 진동제어 등 여러 가지 기능이 요구되기 때문이다. 본 논문에서는 이러한 자기부상형 고진공 복합분자펌프의 제어를 위한 선형제어시스템의 구성을 실제 시스템의 적용을 통하여 설명하였다. 각 제어기는 DSP 를 이용한 디지털 제어시스템으로 구성되었으며, 2, 500 l/s 급의 복합 분자펌프 시작품에 적용하여 10,000 rpm까지의 기본성능시험을 수행하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.39-45
• /
• 2004

This paper proposes an algorithm of address analysis for the next-generation networks. That is, we present integrated address analysis of the Numbering Plans of public telecommunication networks such as those of the ATM network. The purpose of implementing software for integrated address analysis is to actively and flexibly cope with a large change of information while operating the system and the network. By designing and implementing a database structure and an address analysis algorithm, interworking is possible among part (local) networks that each have a different Addressing Plan within an integrated network. Proposed relational model database structure has effect that do to manage address information of complicated network efficiently. Also, apply in real environment and proved excellency through interworking test to verify mechanism that propose.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.69-75
• /
• 2003

NAPRT(Naming Authority Pointer) is a type of resource record specified in IETF RFC 2915. NAPTR enables to register various services in the Domain Name Systems and thus provides a way to discover services available on specific hosts. This paper describes the design and implementation of a Proxy DNS system aimed at supporting NAPTRs. The goal of this work is to study on the feasibility of the service discovery registered in DNS via NAPTR records and provides the result for simplicity and extensibility of implementation through the implementation of a actual Test-bed system This research result can be applied to service discovery in the resource information management for high performance GRE environments as well as to the implementation of DNS infrastructure for the ENUM.

• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.8-13
• /
• 2009

Software-Based GNSS Simulation Tool is being developed by ETRI as a part of development of software-based GNSS Test & Evaluation Facility which will provide test and evaluation environment for various software level application and navigation algorithm in GNSS. The simulation tool will provide digitized GNSS signal generator and receiver including GPS and Galileo. The detailed design and module implementation for the Software GNSS signal generation and signal processing simulation tool and its modular implementation is presented in this paper.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.46-53
• /
• 2008

This paper presents a 13.56 MHz RFID reader that can be used as a door-lock system for smart home security. The RFID reader consists of a transmitter, a receiver, and a data processing block. To verify the operation of the developed RFID reader, we present both a PSPICE simulation for transmitter/receiver and a digital simulation for data processing block. In particular, a CRC block for error detection of received data and a Manchester decoding block for position detection of collided data are designed using VHDL. In addition, we applied a binary search algorithm for multi-tag anti-collision. The anti-collision procedure is carried out by PIC microcontroller on software. The experimental results show that the developed reader can provide the right multi-tag recognition.