• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.14-22
• /
• 2000

The estimation of proper prediction method and the alteration of transformation method of environmental regulation standard were carried out by measuring blasting noise in construction field. The correlation of scaled distance with sound pressure level were better than with sound level, but it was proved to be difficult to control blasting noise because the correlation factor was too 1ow. three methods to transform sound pressure levee to sound level were examined. The method is the transformation by correlation equation of sound pressure level and sound level which are measured at the same time, and simplified transformation of A-weighting network corresponding to dominant frequency, and the transformation of sound pressure level by FFT. There were many errors to transform. The best effective method is the transformation using correlation equation of sound pressure level and sound level which are measured at the same time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.623-624
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.399-400
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.607-608
• /
• 2010

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.327-335
• /
• 1994

In this paper, to identify the dynamic characteristics of antenna system, the antenna is divided into 4 components and those were analyzed with a conventional FEM package MSC/NASTRAN. Using a Component Mode Synthesis Method, dynamic characteristics of total system is also identified. The Coherence of each component to total system is evaluated by using strain and kinetic component to total system is evaluated by using strain and kinetic energy. The improving strategy of dynamic characteristics is suggested by changing mass and stiffness of large coherence components.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.261-266
• /
• 1998

In this study, the in-situ parameter identification method for active magnetic bearing (AMB) actuator based on an open-loop balancing scheme is proposed. The scheme utilizes the relation between the compensating voltage and the known unbalance force. Main advantage of this method is that it is easy to use, yet it gives the actuator dynamics on the actual operating condition of an AMB system. The experimental results show that the proposed scheme compensates the known unbalance accurately and consequently identifies the actuator dynamics effectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.116-122
• /
• 1995

본 논문에서는 컴프레서 쉘의 구조해석을 수행하기 위하여, 범용 구조 해석 패키지인 MSC/NASTRAN을 이용하여 컴프레서 쉘 전체의 동특성 해석을 수행하였으며, MSC/NASTRAN의 Superelement 모듈인 부분구조합성법을 이용하여 구조물 전체의 동특성해석을 수행하였다. 그리고, 각 분계의 변형 및 운동 에너지를 산출하여 전체 구조물의 고유모드에 대한 분계의 기여도를 평가하였으며, 각각의 에너지에 기여가 높은 분계의 형상을 변경하여 구조물 전체가 원하는 동특성을 얻도록 하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.154-159
• /
• 1995

In this study, an efficient, yet easy to use, in-situ runout identification scheme by using extended influence coefficient method is presented for active magnetic bearing(AMB) systems. It is shown experimentally that the proposed scheme successfully identifies and eliminates the troublesome runout of the well balanced AMB system in the laboratory so that a high precision spindle system can be achieved, while it is in operation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.202-207
• /
• 1995

BAZOOKA SPEAKER에 대한 음향특성연구와 중저음 특성강화를 위한 설계인자 변경해석을 위하여 유한요소법과 경계요소법을 사용한 수치해석을 수행하였고, 그 해석결과의 검증과 흡음물성치 산출을 위하여 음향측정실험, 구조물의 동특성실험등을 실시하였다. 연구결과, 내부공간의 음향모드특성, 외부음장에서의 주파수응답특성, 방사패턴, 그리고 음압의 공간 분포특성과 구조물의 동특성을 명확히 규명하였고, 각 음향설계인자 변경에 따른 음향특성을 예측하여 중저음특성강화를 위한 방안을 수립하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.255-256
• /
• 2011