• 제목/요약/키워드: 소음의 감쇠

검색결과 537건 처리시간 0.023초

자동차의 엔진소음 감쇠를 위한 효율적인 적응제어기에 대한 연구 (Study on Efficient Adaptive Controller for Attenuation of Engine Noises in a Car)

  • 권오상
    • 한국전자통신학회논문지
    • /
    • 제9권9호
    • /
    • pp.983-989
    • /
    • 2014
  • 본 논문에서는 자동차의 무게 감소, 탑승자의 안락함과 정숙함, 그리고 연비의 향상 등을 위해 소음을 저감하는데 있어 흡음재와 차음재를 사용하는 기존의 수동적인 방법을 사용하지 않고 능동적으로 감소시키는 방법을 제안하였다. 제안한 방법은 기존의 능동소음 제어기를 향상시킨 것으로서 양방향 제어 알고리듬을 사용하는 새로운 제어기이다. 제안한 알고리듬은 계산양의 증가가 거의 없고, 구현이 간단하고 안정적이며, 수학적으로도 해석이 용이한 장점이 있다. 자동차 엔진소음에 대한 모의실험을 통해 양방향 제어기의 소음감쇠 성능을 순방향제어기와 역방향제어기의 성능에 대해 비교한 결과 시간영역과 주파수영역에서 양방향제어기의 소음감쇠 성능이 우수함을 확인하였으며, 임펄스성의 간섭이 유입되거나 2차 경로의 응답이 변화하는 경우에도 가장 좋은 성능을 보여주었다.

응답예측모델을 이용한 속도의존형 감쇠장치의 최대제어력 산정 (Maximum Control Force of Velocity-dependent Damping Devices Using Response Estimation Models)

  • 이상현;민경원
    • 한국소음진동공학회논문집
    • /
    • 제14권6호
    • /
    • pp.503-511
    • /
    • 2004
  • 본 연구에서는 푸리에 모델, 확률 모델, 그리고 Newmark 설계 스펙트럼 방법과 같은 응답예측 모델을 사용하여 속도의존형 감쇠장치에 의해 제어되는 구조물의 응답과 제어기의 최대제어력을 예측하였다. 이를 위해, 유사 속도로부터 실제 속도를 예측하는 방법이 제안되었으며, 이 방법은 감쇠장치에 의해 증가되는 감쇠비의 실제속도에 대한 효과를 고려한다. 시간이력해석결과는 정확한 최대제어력을 예측하기 위해서는 실제속도가 사용되어야 하며, 제안된 방법에 의해 수정된 Newmark 설계 스펙트럼이 가장 전 주기구간에 걸쳐 정확한 예측 값을 산정함을 보여준다.

다중동조질량감쇠기를 이용한 단순지지 슬래브의 진동 및 소음저감에 관한 연구 (Vibration and Noise Control of the Simply Supported Slab Using the Multi-tuned Mass Damper)

  • 황재승;홍건호;박홍근
    • 한국소음진동공학회논문집
    • /
    • 제18권10호
    • /
    • pp.1006-1013
    • /
    • 2008
  • In this study, it is outlined that heavy weight floor impact noise induced by the vibration of slab can be reduced using multi tuned mass damper(MTMD) effectively. Substructure synthesis is utilized to develope analytical model of the slab coupled with MTMD and acoustic power is introduced to evaluate the performance of noise control for simplicity. Numerical analysis is carried out to investigate the effect of the properties of MTMD on the vibration and noise control of the simply supported slab. Numerical analysis shows that mass ratio of MTMD is critical on the vibration and noise control of the slab and it is also essential to reduce the vibration in higher modes of slab in the light of its great effect on the radiation of sound.

이완식 발파공법의 진동과 소음 특성 (Vibration and Noise Characteristics of Spall Blasting Method)

  • 양현식;김남수;김원범;최미진
    • 화약ㆍ발파
    • /
    • 제23권3호
    • /
    • pp.19-25
    • /
    • 2005
  • 본 연구에서는 이완식 발파공법과 건교부 제시 발파공법을 적용한 현장에서 지반진동과 소음을 측정, 분석하고 비교하였다. 건교부 방식 발파에 비해 이완식 발파공법이 다소간 진동감쇠 효과가 있었다 발파매트를 사용한 이완식 발파시험 견과가 건교부 방식 발파에 비하여 소음이 감쇠되는 것으로 나타났으며, 파쇄입도는 다소 떨어졌다.

다중질량감쇠기를 이용한 슬래브의 진동 및 소음저감에 관한 연구 (Vibration and noise control of slab using the multi-tuned mass damper)

  • 황재승;김홍진;강경수;홍건호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.659-664
    • /
    • 2008
  • In this study, it is outlined that heavy weight floor impact noise induced by the vibration of slab can be reduced by multi tuned mass damper(MTMD) effectively. Substructure synthesis is utilized to develope analytical model of slab coupled with MTMD and acoustic power is introduced to evaluate the performance of noise control for simplicity. Numerical analysis is carried out to investigate the effect of the properties of MTMD on the vibration and noise control. Numerical analysis shows that mass ratio of MTMD is critical on the vibration and noise control of the slab and it is essential to reduce the vibration in higher modes of slab because it has a great effect on the radiation of sound.

  • PDF

고속도로 교통소음 예측-전달감쇠 산정 (Prediction of Highway Traffic Noise-calculation of Sound Attenuation during Propagation)

  • 조대승;김진형;최태묵;오정한;김성훈
    • 한국소음진동공학회논문집
    • /
    • 제12권3호
    • /
    • pp.236-242
    • /
    • 2002
  • This paper presents some advanced and supplemental methods to enhance the accuracy In case of calculating geometric divergence attenuation, attenuation by multiple screening structures, ground attenuation at unflat surfaces of sound during propagation outdoors by the methods specified in ISO 9613-2. Moreover, a calculation method for considering short-term wind effect, specified in ASJ Model-1998, is also introduced. To verity the accuracy of adopted methods, we have carried out highway traffic noise prediction and measurement at tile twelve locations appearing representative road shapes and structures, such as flat, retained cut, elevated, barrier-constructed roads. From the results, we have confirmed the predicted results show good correspondence with the measured at direct, diffracted and reflected sound fields within 30 m from the center of near side lane.

특정 실험실 조건에서의 사무실용 낮은 칸막이의 소음감쇠성능 측정방법 KS제정을 위한 ISO 규격내용 분석

  • 양관섭;정성수;김선우
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 추계학술대회논문집
    • /
    • pp.21-24
    • /
    • 2006
  • 대부분의 사무용 건물은 코아 부분(엘리베이터 홀, 화장실, 계단 등)을 제외하고는 Open 되어 있으며, 필요에 따라 부서간에는 천장 면까지 도달하는 경량벽체를 설치하여 독립된 공간을 구획하고, 부서내부에서는 직원들간의 커뮤니케이션은 용이하게 하는 대신에 최소한의 독립성을 제공하기 위해 낮은 칸막이 등을 설치하고 있다. 그러나 사무실에 사용하는 칸막이 벽체 중 천장 면까지 도달하는 칸막이에 대해서는 KS F 2808(건물 부재의 공기전달음 차단성능 실험실 측정방법)의 측정방법을 이용하여 차음성능을 확인할 수 있으나 낮은 칸막이에 대해서는 소음저감 성능을 측정할 수 있는 측정 방법에 관한 규격이 없다. 따라서 기존에 있는 모든 KS 규격들은 국제표준규격인 ISO와의 부합화가 이루어졌거나 이루어지고 있기 때문에 이러한 정부의 방침에 따라 본 낮은 칸막이에 대한 소음감쇠량 측정규격 또한 ISO규격(ISO 10053(음향- 실험실 조건에서의 사무실 스크린의 소음저감성능 측정방법))을 받아들이기 위해 ISO규격 내용을 검토하였다. 향후 이 규격이 그대로 우리나라 규격으로 제정될 때 나탈 수 있는 문제점을 최소화하기 위해 국내에 있는 반 무향실에서 낮은 칸막이의 실제 소음저감 성능을 실시할 계획이다.

  • PDF

타이어 트레드밴드 진동 음향방사 예측 (A Prediction of Sound Radiation from Tire Treadband Vibration)

  • Byoung-Sam Kim;Seong-Gon Cho
    • 한국안전학회지
    • /
    • 제12권1호
    • /
    • pp.133-139
    • /
    • 1997
  • 최근, 차량의 생활환경 소음에 대한 규제가 점점 강화되고 있다. 특히, 차량으로부터 발생하는 여러 가지 소음원 중에서 타이어로부터 발생하는 소음의 비중이 점점 증가하는 추세이다. 따라서, 본 연구에서는 타이어의 트레드밴드로 부터 발생하는 소음에 대하여 연구하였다. 본 연구에서는 타이어 트레드밴드를 장력, 감쇠, 기초강성 둥이 고려된 무한 보로 가정하였고, 타이어 트레드밴드에 조화집중이동하중이 가진 될 때 트레드밴드로 부터 발생하는 소음을 예측하고자 하였다. 트레드밴드로 부터 방사되는 음향파워는 공간좌표의 푸리에 변환을 이용하여 예측할 수 있으며, 타이어 내부 공기압에 의한 장력, 재질의 특성에 의한 감쇠, 기초강성 둥의 변화가 트레드밴드로 부터 방사되는 음향파워에 미치는 영향을 조사하였다. 한편, 본 연구에서 제시한 모텔은 저소음 타이어 개발을 위한 타이어 설계 자료의 일환이다.

  • PDF

군(軍) 건설장비 소음의 전달 및 감쇠특성에 관한 연구 (A Study on the Propagation and Attenuation Properties of the Military Construction Equipments Noise)

  • 주덕훈;김재수
    • 한국소음진동공학회논문집
    • /
    • 제20권9호
    • /
    • pp.797-804
    • /
    • 2010
  • In case of the construction equipment using by the military camp, such equipments are different from those equipments using at general construction site, of which muffler(silencer) is attached at the passenger seat side, since such equipments are obsoleted, it is great part that a considerably loud noises are continuously diffusing. When working, such noise can be influenced a lot of effects to those working soldiers nearby the equipment, and though it is really terrible loud noise as much as can arise a civil complaints by neighboring civilians, but because its specialty of the military, it is real state that there are many difficulties in establishing an effective soundproof countermeasure due to study shortage and lack of the relevant material regarding to military construction equipment. Accordingly, this study has ever grasped the characteristics of noise by its each frequencies and by distances about those 9 kinds of construction equipments using chiefly by the military camp. As the result, it was known that the military construction equipment is generating the loud noise which can influence bad effect to the workers, and such high sound pressure level of low frequency band can harm even to far distance.