• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.28-36
• /
• 2020

In shipbuilding industry, there is conducting most of works by welding at the shipyard, and the volume of welding is increasing with international trends of green ships. Welding joint is guaranteed quality through non-destructive testing (NDT). The manual welding inspection report is produced by identifying the drawings designed, which results in losses the many workforce and occurs human errors. To solve these problems, this paper covers a system that reports on inspection information is automatically generation by input data based on shipbuilding-specific CAD. The developed system analyzes the shape data from drawings of modeling. Also, the system determines welding joints through expansion of the part boundary and generates tag numbers. In addition, it provides the function to automatically extract the information needed for inspection such as weld length, thickness and etc. We conducted test to verify the usefulness of the developed system and confirmed that the welding inspection information extracted through system matches the information shown in drawings of modeling.

• Journal of Chest Surgery
• /
• v.30 no.8
• /
• pp.838-842
• /
• 1997

Atypical bronchopulmonary carcinoid is an uncommon pulmonary tumor, an intermediate form between low grade malignant typical carcinoid and high grade malignant small cell carcinoma which is considered neuroendocrine in origin and may produce various hormones. We describe an asymptomatic middle aged women with no elevated hormone level. Based on bronchoscopic biopsy initial diagnosis of atypical carcinoid with oncocytic change was established. The patient underwent right lower and middle lobe bilobectomy and medi stinal Iymph node dissection. Postoperative adjuvant radiation therapy was performed in 4 weeks.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.315-321
• /
• 2003

Larval entrance and adult emergence holes of Japanese pine sawyer (Monochamus alternatus), primary vector of pinewood nematode (Bursaphelenchus xylophilus), were measured in dead pine logs from 1999 to 2002. Their distributions within pine log were also analyzed. More numbers of entrance and emergence holes were distributed on crown than trunk part as 56.2 and 27.7 holes/m$^2$, respectively Higher proportions of entrance (27.5％) and emergence holes (22.4%) were distributed on the log with 8 to 10 cm diameter; the larger or the smaller logs had fewer holes. Surface area of entrance hole was 65.8 $\textrm{mm}^2$ and diameter of emergence holes was 7.0 mm in average. Average depth of pupal chamber was 24.8 mm from surface to the bottom of the chamber, and its volume ranged from 200 to 2.000 ㎣ Average distance between entrance and emergence holes on bark surface was 3.3 cm. Gallery length from the beginning of entrance hole to the end of emergence hole was 46.2 mm.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.286-290
• /
• 2001

Ginger was stored in the 0.05mm and 0.08mm of PE film bags and the styrofoam box. During the ginger storage, weight losses in the PE film bags were effectively supressed than in the control bag, and storage was better in the 0.08mm PE film bag while the spoilage of ginger was higher than in 0.05mm bag. The effective storage temperature was 10$^{\circ}C$ at which was no scouting during the storage. And the perforation in the PE film bag helped the healthy ginger ratio. Single perforation of 6an diameter was good for 0.05mm film and three for 0.08mm film. When CO$_2$absorbent was added into the film bag, the spoilage and mold occurence was lowered. In the styrofoam box, the healthy ginger ratio also increased by incorporating the absorbents, but there were no great differences between activated charcoal and calcium hydroxide.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.2
• /
• pp.119-126
• /
• 2024

The IISS(Integrated Interface Storage System) software performs the function of transmitting tactical domain messages of Combat Management System for interface analysis of Naval Combat System. The source code is relatively large because the IISS software handles most messages. The modifications of source code of the IISS software occur frequently due to changes in interconnected equipment and messages. Therefore, additional effort and cost are required during the development process. In this paper, we studied standardization of the IISS software to improve reusability. Through the feature model, the components of the IISS software were divided by function and modification elements were separated. And the structure of the IISS software was improved by applying design patterns. As a result, it was possible to minimize modifications of the IISS software by changes in interconnected equipment and messages and a reduction in development costs could be expected.

• Information Systems Review
• /
• v.17 no.2
• /
• pp.49-75
• /
• 2015

In this study, we propose an ubiquitous computing technology (UCT) based construction management (CM) framework which is composed of processes, information systems, and organizations. For this, we first define 14 promising UCT based CM tasks from 140 candidate tasks using a matrix analysis technique. After defining the 14 tasks, we survey the construction management experts with questionnaire of the importance, improvement possibility, ease of implementation of the tasks. Based on the survey results, we select three high priority tasks: material management, operation management, inspection and measurement management. We conceptually design the framework, that is, processes, information systems, and organizations for the 3 tasks to be more innovative by applying the UCT to the CM tasks. Finally, we apply the proposed framework to some construction fields and estimate the effectiveness of the framework. Estimation results show that the CM tasks can be performed more quickly with less man powers using the UCT-based CM framework.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.408-413
• /
• 1996

In most cases of diffuse bullous emphysema and chronic obstructive lung disease, t e risk of surgical treatment is very high. But surgical treatment in selected cases of bullous emphysema with localized involvement of only one side of the lung has suggested safe and good management. So patient selection of surgical treatment Is one of the most important things in management of bullous emphysema. From 1987 to 1992, 11 patients were operated for bullous emphysema with giant bullae at the Department of Thoracic and Cardiovascular Surgery of Chonbuk National University Hospital. Author selected surgical candidates who had progressive dyspnea and symptomatic bullae occupying more than one third of the hemithorax and shifting the trachea and mediastinum to the opposite side of the lung. There were 7 males and 4 females ranged from 19 to 61 years of age. Operative procedures were bullectomy and/or wedge resection in 7 cases, segmentectomy in 2 cases and lobectomy in 2 cases. Symptoms and pulmonary function of all patients were improved six months to three years postoperat vely. There were no postoperative death. We conclude that surgical treatment of bullous emphysema with giant bullae is safe and a good treatment of modality in indicated patients.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.3
• /
• pp.45-51
• /
• 2021

The evaluation of the degree of compaction of the embankment area, which accounts for most of highway earthworks, is generally performed by a flat plate loading test. The plate loading test is a traditional test method and has high reliability in the field. However, as reaction force equipment must be carried out and it takes about 40 minutes per site during the test, there may be limitations in managing the entire expanse of earthworks. Meanwhile, in order to overcome this, the Ministry of Land, Infrastructure and Transport proposed a simple method of evaluating the level of compactness in the provisional guidelines for compaction management of the packaging infrastructure in 2010. However, it has not been utilized at the highway construction site until now, 10 years later. Therefore, this study attempted to verify the utility of the compaction evaluation method using LFWD (Light Falling Weight Deflectometer) of the impact loading method among the test methods suggested in the provisional guideline. To this end, the correlation was derived by conducting a plate loading test and an LFWD test for each site property and compaction degree. As a result of the test, there was no consistency of test data in the ground with a relative compaction of 80% or less. However, it was confirmed that the correlation has a tendency to increase beyond that. If the test method or test equipment is improved to ensure the consistency of the test values of the impact loading method in the future, it will play a big role in solving the blind spot for compaction management in the earthworks.