• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.292-293
• /
• 2018

최근 증강현실 산업 분야가 많은 각광을 받고, 시장이 성장함에 따라 보다 쉽게 증강현실을 구현 할 수 있도록 많은 SDK(Software Development Kit)들이 발표되었다. 기존에 발표 된 SDK들이 대부분 강체 추적만을 제공한다. 이는 현재 추적 알고리즘의 기반이 되는 이론이 강체에 한정되어 있기 때문이다. 그러나 제안하는 프레임워크는 강체 추적뿐만 아니라 비강체 추적 또한 가능하다. 이를 위하여, 제안하는 프레임워크는 증강현실의 핵심 기술인 추적 엔진과 보다 넓은 확장성을 가지도록 추적하고자 하는 물체를 사전에 분석하고 실시간으로 모델 변형 정보를 추정하는 시뮬레이션 엔진으로 구성된다. 추적 엔진은 기본적으로 물체의 표면에 존재하는 특징점 정보를 이용하여 추적을 진행 하되, 비강체 추적을 위하여 시뮬레이션 엔진의 도움을 받는 형태로 구성된다. 시뮬레이션 엔진에서는 물체의 역학 파라미터를 추정하여 이를 추적을 진행 할 때, 추적 엔진의 물체 표면 특징점 정보를 이용하여 물체의 변형 정보를 추정한다. 또한 제안하는 프레임워크는 성능 상의 장점 외에도 오픈소스로 공개되기에 국내 증강현실 시장 성장에 발판이 될 것으로 기대된다.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.164-173
• /
• 2005

Painterly rendering may bring various results through the parameters that determine the characteristics of brush strokes such as, color, orientation, size, and shape. In this paper, we propose the most adaptive brush stroke generation for source images, using reference data. Our algorithm used Colors formed by actual palette colors from artists. To create the palette, we have referred mostly to colors used in Van Gogh's works and determined the color of brush strokes by transferring it to the most similar one, through comparing colors used in source images and the palette colors. Also, In order to emulate a brush stroke with dynamic properties like Van Gogh styles we have applied a brush stroke orientation that surrounds the edges by referring to the edge orientation of source images. The sizes were determined depending on the different sizes of the objects from wide to narrow brushes. Finally, we applied spline curve shapes to simulate curves and swirls like Van Gogh styles. The brush strokes created in such method, were applied separately according to its segmented images, and composed after rendering.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1565-1570
• /
• 2014

In networking communication, nodes and base station send data to each nodes and destination nodes. In this perspective, it is very important to determine the direction in which data sent to each nodes or destination nodes. Ad-hoc routing protocol is a standard routing protocol that determines how the packets sent to destination. Ad-hoc routing protocol includes protocols such as Ad-hoc On-demand Distance Vector (AODV) and Dynamic Source Routing (DSR). In our efficient proposed protocol based on small end-to-end sequence numbers, route direction can be changed properly with the assistance of helper nodes. In this paper, we focus on the simulation analysis of proposed protocol and comparison with other routing protocol models such as AODV and DSR. We simulated using Network Simulator (NS-2) by parameters such as simulation time, number of nodes and packet size based on our metrics (packet delivery fraction, routing load, data throughput). Our proposed protocol based on small end-to-end sequence numbers shows better performance and superior to other two protocols.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1545-1553
• /
• 2018

Recent eruptive activity at Kīlauea Volcano started on at the end of April in 2018 showed rapid ground deflation between May and June in 2018. On summit area Halema'uma'u lava lake continued to drop at high speed and Kīlauea's summit continued to deflate. GPS receivers and electronic tiltmeters detected the surface deformation greater than 2 meters. We explored the time-series surface deformation at Kīlauea Volcano, focusing on the early stage of eruptive activity, using multi-temporal COSMO-SkyMed SAR imagery. The observed maximum deformation in line-of-sight (LOS) direction was about -1.5 meter, and it indicates approximately -1.9 meter in subsiding direction by applying incidence angle. The results showed that summit began to deflate just after the event started and most of deformation occurred between early May and the end of June. Moreover, we confirmed that summit's deflation rarely happened since July 2018, which means volcanic activity entered a stable stage. The best-fit magma source model based on time-series surface deformation demonstrated that magma chambers were lying at depths between 2-3 km, and it showed a deepening trend in time. Along with the change of source depth, the center of each magma model moved toward the southwest according to the time. These results have a potential risk of including bias coming from single track observation. Therefore, to complement the initial results, we need to generate precise magma source model based on three-dimensional measurements in further research.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.7
• /
• pp.333-338
• /
• 2016

This study is to estimate proximity without direct measurement of the weight of fresh ginseng. For this work, we developed a ginseng image acquiring instrument and obtained 126 ginseng images using the instrument. Image analysis and parameter extraction process was used C language based Labwindows/CVI development tools and open source library OpenCV. Estimation formula is made by weighing the sample with image analysis of fresh ginseng. We analyzed the correlation between the pixel number and the weight of ginseng using a linear regression approach. It was obtained a strong positive correlation coefficient of 0.9162 with a linearity value.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.45-52
• /
• 2005

This paper presents the characterization of through hole vias on printed circuit board (PCB) through the time domain and frequency domain measurements. The time domain measurement was performed on a single via using the TDR, and the model parameters were extracted by the fitting simulation using HSPICE. The frequency domain measurement was also performed by using 2 port VNA, and the model parameters were extracted by fitting simulation with ADS. Using the ABCD matrices, the do-embedding equations were derived probing in the same plane in the VNA measurement. Based on the single via characterization, the differential via characterization was also performed by using TDR measurements. The time domain measurements were performed by using the odd mode and even mode sources in TDR module, and the Parameter values were extracted by fitting with HSPICE. Comparing measurements with simulations, the maximum calculated differences were $14\%$ for single vias and $17\%$ for differential vias.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.197-203
• /
• 2014

When the lightning current is injected to the ground system of information and communication facilities, analysis of the transient potential rise in the ground system is one of main factors to effectively design the ground system. The performance of grounding systems is normally estimated with the grounding impedance and the transient potential rise which represents the electrical characteristics of the grounding system. The method for calculating the grounding impedance depending on the injection point of the lightning current was proposed. The delta-gap source model was proposed to calculate the grounding impedance in the case that the lightning current is injected to the center of the horizontal ground electrode. A new program which is possible to apply the frequency-dependent soil parameters using the Debye model was developed, because a commercial program for analyzing the performance of the grounding system can not apply to the frequency-dependent soil parameters. The experiment was carried out to confirm the availability of the simulation results with the same condition. Finally, the transient potential rises of a horizontal ground electrode depending on the lightning current waveforms were analyzed by using the results of the grounding impedance which is associated with the frequency-dependent soil parameters.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1649-1650
• /
• 2006

반도체 소자의 선폭이 나노미터 스케일로 진입함에 따라 소자의 물리적 특성을 나노미터 스케일에서 정밀하게 측정하고자 하는 요구가 증대되고 있다. Atomic Force Microscopy (AFM)은 나노미터 이하의 해상도를 가지고 물질 표면의 기하하적, 전기적 특성 등을 측정할 수 있으므로 나노소자 연구에 필수적인 도구가 되었다. 그러나 AFM은 낮은 측정속도와 탐침의 기하학적 형상에 의한 AFM 영상의 왜곡 등과 같은 치명적인 단점도 가지고 있다. AFM의 낮은 측정 속도를 개선하기 위해서 진보된 마이크로머시닝기술을 이용하여 캔틸레버의 크기를 줄이거나 캔틸레버 위에 박막 구동기를 집적시키는 등의 노력이 진행되고 있으나, 이 경우 전통적인 식각 공정을 이용하여 캔틸레버 위에 tip을 형성하는 것이 매우 어렵다. 본 연구에서는 이미 제작된 캔틸레버 위에 전자빔 조사법을 이용하여 탄소상 tip을 직접 성장시킴으로써 전통적인 식각 공정에 비해 매우 간단하고 값싸며, 활용도가 높은 공정을 개발하였다. 탄소상 tip 성장에 필요한 탄소 소스는 dipping 방법을 이용하여 공급하였고, 시분할법을 사용하여 캔틸레버의 원하는 위치에 tip을 성장시킬 수 있었다. 이렇게 제작된 tip은 최대 $5{\mu}m$ 높이까지 가능했으며, 종횡비는 10:1 이상이어서 tip의 형상에 의한 AFM 영상 왜곡 현상을 최소화할 수 있을 것으로 기대된다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.49-49
• /
• 2002

독립된 티타늄(Ti)과 실리콘(Si) 타켓을 사용하여 DC reactive magnetron co-sputtering 공 정으로 Ti-Si-N 코탱막을 SKD 11 합금강위에 합성하였다. 고분해능 TEM 및 XPS 분석들로부터 Ti-Si-N 코탱막은 나노미터 크기의 TiN결정체들이 비정질 Si3N4 기지에 분산된 나노복합체의 마세구조를 냐타내었다. 코탱막의 경도는 11 at.%의 Si 함량에서 39 GPa의 최 고 경도값을 나타내었고 이 경우 미셰조직은 5nm 크기의 미세한 TiN 결정이 비정절상의 기지에 균일하게 분포된 특성을 보였다 .. Ti-Si-N 박막내에 Si 함량이 증가할수록 TiN 결정 상들은 다배향성을 나타내었고 크기가 감소하였으며 비정질상에 의해 완전히 둘려싸언 형상 으로 변화하였다. 높은 Si 함량에서는 질소 소스의 부족현상에 의하여 코팅막내에서 free Si 가 나타났다. 상대습도가 증가함에 따라 Ti-Si-N 코탱막의 마찰계수와 마모량이 현저하게 감소하였다. 강재에 대한 Ti-Si-N 코팅막의 마모거동에 있어서 Si02 냐 Si(OH)2 같은 얇은 윤활막의 형성이 중요한 역할을 하는 것으로 판단되어졌다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.934-936
• /
• 2017

화자인식 기술은 등록된 화자 목록 내 화자 또는 사칭 화자의 발화로부터 발화자를 식별하는 기술로써, 음성 소스를 기반으로 동작하는 디바이스의 개인화를 위해 필요한 기술이다. 본 논문에서는 차량 잡음이 존재하는 자동차 주행 환경을 타겟으로 하는 화자인식 시스템 개발 방법을 제안한다. 차량 잡음에 의해 오염된 음성신호로부터 잡음 성분을 제거하기 위해 parametric multi-channel Wiener filter (PWMF)를 이용하여 실험한 결과, 남성화자 조건에서는 PMWF의 내부 파라미터 조절을 통해 필터를 minimum variance distortionless response (MVDR) 빔포머로 동작하도록 설정하였을 때, 여성화자 조건에서는 잡음을 제거하지 않았을 때 가장 낮은 동일오류율을 보임을 확인할 수 있었다.