• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.142-150
• /
• 1985

In this paper, stress distribution were given in consideration of bending effects in hemi-spherical shell and a modified equation of buckling load was represented with implicating the effects of plastic deformations and shape parameters. Especially, the distributions of shell near it's vertex were analyzed numerically, according to several cases of loading. For the sake of more good estimation of plastic dissipating energy, we used the yield-line method from plate theory. The modified criterion of bucking, P super(*) sub(cr), that was suggested in this study, was applied to SUS 302 stain-less steel hemi-spherical shell which had it's Poisson's ratio and Young's modulus with 0.33 and 19700 kg/mm$^2$. From some experiments and comparisons with other results, 재 suggested the critical buckling-load-equation with P super(*) sub(cr)=2E super(*).(t super(2)/a super(2)).{3(1-ν super(*2)} and computed the buckling initiation load with this equation. Because these result from modified criterion have more coincidence than previous one, we prospect this equation can be magnified it's utilities to the other materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.400-413
• /
• 2016

The horizontal shear capacity when the flange of a steel girder is replaced with 80 MPa concrete is important for its structural safety. In this study, 6 specimens with different interface conditions were designed and fabricated based on the Limit State Design Code on Korean Highway Bridges and static tests were performed to measure the horizontal shear capacity. Not only the resistance factors of the stud shear connector, concrete and reinforcement, but also the surface conditions of the casing concrete and spacing of the horizontal shear reinforcements were used as the experimental variables. The experiments showed that the interfaces between the steel girder and the concrete flange have stronger joint performance than those between the concrete flange and deck slab. To ensure the composite action in the plastic zone, the conservative horizontal shear reinforcement is more important than the roughness in the concrete face.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.17-23
• /
• 2005

In Korea, the production of reclaimed concrete materials has been increased due to the increase in the concrete structures taken down every year. The reclaimed concrete materials have been reused as road materials. However, the studies on their mechanical and environmental properties have been very limited. The recycled rate of the materials is currently low in Korea. This paper presents the investigation of mechanical and environmental properties of the reclaimed concrete materials, as well as the comparisons with those of gravel. For the evaluation of the mechanical and environmental characteristics, following tests were conducted on both reclamed materials and gravel; liquid limit, plasticity index, CBR, sand equivalent test, abrasion test, pH test, and column leaching test. The test results showed that the reclaimed concretes satisfy the requirements for use as roadbase, subbase, and subgrade materials, except base materials. The pH of reclaimed concrete materials was less than 11 and the leaching test results satisfied the regulatory requirement of Waste Management Act in Korea. Based on the investigations, it appears that the reclaimed concrete materials are environmentally safe and applicable for use as road materials.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.1
• /
• pp.21-28
• /
• 2013

This study proposed optimum lime contents for clayey soils consisting of representative clay minerals, Kaolinite and Na-Bentonite, according to optimum lime content method (ASTM C 977-22) by means of ground improvement method of clayey soils. As geotechnical properties, the variations of atterberg limits and unconfined compressive strength were analyzed and Ca-ion and micro-structure along elapsed time were observed for lime-added clayey specimens. The test results show that optimum lime content method provides an appropriate methodology for ground improvement of clayey soils and the variation of $Ca^{2+}$ might be a good index to predict the rate of ground improvement for clayey soils with lime addition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1741-1751
• /
• 2004

It is commonly requested that the steam generator tubes wall-thinned in excess of 40% should be plugged. However, the plugging criterion is known to be too conservative for some locations and types of defects and its application is limited to a single crack in spite of the fact that the occurrence of multiple through-wall cracks is more common in general. The objective of this research is to propose the optimum failure prediction models for two adjacent through-wall cracks in steam generator tubes. The conservatism of the present plugging criteria was reviewed using the existing failure prediction models for a single crack, and six new failure prediction models for multiple through-wall cracks have been introduced. Then, in order to determine the optimum ones among these new local or global failure prediction models, a series of plastic collapse tests and corresponding finite element analyses for two adjacent through-wall cracks in thin plate were carried out. Thereby, the reaction force model, plastic zone contact model and COD (Crack-Opening Displacement) base model were selected as the optimum ones for assessment of steam generator tubes with multiple through-wall cracks. The selected optimum failure prediction models, finally, were used to estimate the coalescence pressure of two adjacent through-wall cracks in steam generator tubes.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.535-544
• /
• 2011

The rail surface defects can cause the high impact load on the track and lead to the progress of the rail fatigue damage and the rail break. In case of the rail break, there is a great deal of risk for derailment, and thus the maintenance criteria for the rail surface defects are of great importance. In this study, using the dynamic train-track interaction analysis program, the impact wheel loads and rail bending stresses according to the depths of the surface defects have been calculated with the input data of the rail surface irregularities measured at 43 spots with surface defects in the ballasted track of high-speed railway. Considering the irregularity of track geometry, the allowable limits of wheel load and rail bending stress have been set, and the maintenance criteria for the rail surface defects was suggested by analyzing the relationship of the maximum values of wheel load and rail bending stress versus depth and width of rail surface defect. The analysis results suggest that the allowable depth of the surface defect is determined approximately 0.2mm from the limit of the impact wheel load.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.1
• /
• pp.23-30
• /
• 2001

A Series of laboratory tests were conducted to investigate the engineering characteristics for organic soil widely distributed in Yong-dong region which always makes problems in construction works. Physical characteristics of Yong-dong organic soil area were measured in terms of such categories as nature water content, organic content, specific gravity, liquid limit, and plasticity index. As a result, it was found that nature water content was $50.8^{\circ}-343.5%$, organic content 12.1-42.5%, specific gravity 1.76-2.71, liquid limit 46.6-440.2%, and plasticity index 9.2-557.2%. Also, as consolidation load increases, consolidation coefficient slightly decreases with small up and down. The ratio of secondary consolidation coefficient to compression index is 0.001-0.091 $C_a/C_c$, secondary coefficient tends to increase greatly when organic content is in the range of 11-22%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.286-286
• /
• 2010

최근에 환경 오염과 화석 에너지의 고갈 문제를 해결하기 위하여 태양광을 전기 에너지로 변환하는 태양전지 연구에서 가장 이슈가 되는 부분은 저가격화와 고효율이다. 상용화 되어 있는 대부분의 태양전지는 단결정 실리콘 웨이퍼와 다결정 실리콘 웨이퍼를 사용한다. 실리콘 웨이퍼의 원자재 가격을 낮추는 방법에는 한계가 있기 때문에 태양전지 제작 공정에서 공정 단가를 낮추는 방법이 많이 연구되고 있고, 실리콘 웨이퍼가 가지는 재료의 특성상 화합물을 이용한 태양전지 보다 낮은 효율을 가질 수밖에 없기 때문에 반도체 소자 공정을 응용하여 실리콘 웨이퍼 기판에서 고효율을 얻는 방법으로 연구가 진행 되고 있다. 본 연구에서는 마이크로 블라스터를 이용하여 태양전지 cell 상부에 AG(anti-glare)를 가지는 유리 기판을 형성하여 낮은 단가로 태양전지 cell의 효율을 향상시키기 위한 연구를 진행 하였다. 태양전지 cell 상부에 AG를 가지는 유리 기판을 형성하게 되면 태양의 위도가 낮아 표면에서 대부분 반사되는 태양광을 태양전지 cell에서 광기전력효과가 일어나게 하여 효율을 향상시킨다. 이때 사용한 micro blaster 공정은 고속의 입자가 재료를 타격할 때 입자의 아래에는 고압축응력이 발생하게 되고, 이 고압 축응력에 의하여 소성변형과 탄성변형이 발생된다. 이러한 변형이 발전되어 재료의 파괴 초기값보다 크게 되면 크랙이 발생되고, 점점 더 발전하게 되면 재료의 제거가 일어나는 단계로 이루어지는 기계적 건식 식각 공정 기술이라 할 수 있다. 먼저 유리 기판에 마이크로 블라스터 장비를 이용하여 AG를 형성한다. AG는 $Al_2O_3$ 파우더의 입자 크기, 분사 압력, 노즐과 기판과의 간격, 반복 횟수, 노즐 이동 속도 등의 공정 조건에 따른 유리 기판 표면에서의 광학적 특성 및 구조적 특성에 관하여 분석하였다. 일반적인 태양전지 cell 제작 공정에 따라 cell을 제작 한후 AG 유리 기판을 상부에 형성시키고 솔라시뮬레이터를 이용하여 효율을 측정하였다. 이때 솔라시뮬레이터의 광원이 고정되어 있기 때문에 태양전지 cell에 기울기를 주어 태양의 위도 변화에 대해 간접적으로 측정하였다. AG 유리 기판이 태양전지 cell 상부에 형성 되었을 때와 없을 때를 각각 비교하여 AG 유리 기판이 형성된 태양전지 cell에서의 효율 향상을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4216-4222
• /
• 2011

In this study the inelastic behavior of the existing school buildings with infilled masonry walls is analysed by pushover method. The shear stiffness and strength of masonry wall is calculated from the prior experimets and verified by inelastic analysis. The height of infilled masonry wall affects the structural behavior. The higher the masonry wall height, the higher the initial shear stiffness and strength of masonry wall. As the cracks are developed, the strength of masonry wall is much decreased. The proposed inelastic analysis method shows similar results with the experiments and can be used as inelastic analysis model of reinforced concrete buildings with infilled masonry walls.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.63-69
• /
• 2019

Soldering technology has been used in electronic industry for a long time. However, due to solder fatigue characteristics, automotive electronics are searching the semi-permanent interconnection technology such as press-fit method. Press fit interconnection is a joining technology that mechanically inserts a press fit metal terminal into a through hole in a board, and induces a strong bonding by closely contacting the inner surface joining of the through hole by plastic deformation of press-fit terminal. In this paper, the bonding properties of press-fit interconnection are investigated with PCB hole size and surface finishes. In order to compare interconnection reliability between the press fit and soldering, the change in resistance of the press-fit and soldering joints was observed during thermal shock test. After thermal cycling, the failure modes are investigated to reveal the degradation mechanism both press-fit and soldering technology.