• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.53-60
• /
• 2011

As Construction & Demolition(C&D) debris increase every year, a system has enforced for recycled aggregate made out of C&D debris, then recycled aggregate usage increased in construction field. But as environmental problem by alkalinity of recycled aggregate occurred, the study for lowering alkalinity of recycled aggregate is needed. In this study we made alkalinity reducing facility and installed in the C&D debris midterm-treat field. Then we certified effect of lowering alkalinity and quality of recycled aggregates before and after carbonation. As a result, the most effective carbonation condition is 30seconds in carbonation time, -50~100 kPa of reaction pressure with change of 3cycles. This condition made pH 9.33~9.8 of recycled aggregate possible. The quality of recycled aggregate after carbonation was better than before carbonation in terms of plasticity index, modified CBR, abrasion loss, sand equivalent, liquid limit, size distribution, density and water absorption.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.537-544
• /
• 2010

Anchorage control in orthodontic treatment is an important factor affecting treatment results. In the conventional approach, intra-oral anchorage such as application of differential force and moment, Nance holding arch and lingual arch, as well as extra-oral anchorage such as head gear were used for anchorage reinforcement. However, these anchorages may result in undesired tooth movement and require patient cooperation. To overcome these disadvantages, skeletal anchorage system was introduced as orthodontic anchorage. Types of skeletal anchorage include implant, onplant, miniplate and miniscrew. Especially, miniscrew has many advantages such as reduced patient cooperation, low cost and easy placement. Recently, it is successfully used in orthodontic treatment. This cases were treated using orthodontic miniscrews for retraction of ectopically erupting maxillary canine and impacted mandibular canine and intrusion of maxillary incisors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.190-190
• /
• 2003

동력 전달용 구동부품에 있어서 중공 플랜지 형상의 부품은 흔히 찾아 볼 수 있으며, 이는 높은 강도를 요구하기 때문에 강도향상을 위하여 단조에 의한 제품의 성형 방법이 많이 연구되고 있다. 중공 플랜지형상을 갖는 제품의 제조 방법으로서는 중실 플랜지 형상으로 단조하여 내경부를 절삭가공하는 방법, 중실 소재를 후방압출하여 중공 플랜지형상으로 단조하는 방법, 또는 중공의 초기소재를 사용하여 중공 플랜지형상으로 단조하는 방법이 일반적이다. 본 연구에서는 Fig. 1에 나타낸 것과 같이 중공 플랜지 형상을 갖는 기계 부품의 단조방법에 대해 연구하였으며, 중공 관의 내경을 $d^1$, 외경을 $d^2$, 플랜지부의 외경을 $D^0$, 중공 관의 두께를 t, 플랜지부의 두께를 T로 정의하였다. 중공 플랜지 형상에 있어서 공정 설계의 변수는 다양하겠으나, 본 연구에서는 중공관의 외경과 내경의 형상비 $\alpha$(=$d^2$/$d^1$), 플랜지의 폭과 중공관의 두께비 $\beta$(=B/t) 및 중공관의 두께와 플랜지의 두께비 r(=T/t)의 변화에 따른 성형조건에 관해 고찰하였다. 중공 플랜지 형상의 성형방법으로 Fig. 2에 나타낸 것과 같은 $\circled1$중실소재를 이용한 후방압출단조(backward extrusion forging)방법, $\circled2$중공 소재를 이용한 엎셋(upset forging)방법, $\circled3$중공 소재를 이용한 압조법(injection forging), $\circled4$중실소재를 이용한 압조-압출(injection-extruding forging)법의 4가지의 단조 방법을 제시 하였다. 또한, 유한요소해석을 수행하여 소성유동 형태, 유효변형률, 단조하중을 검토하고. 모델재료인 납을 이용한 실험을 통하여 이를 검증하였다. 이를 바탕으로 산업 현장에서 경험에 의존하였던 공정 설계를 보다 효과적으로 개선하기 위한 단조법을 제시하고자 하였다. 또한 중실 소재를 이용한 중공 플랜지 형상의 단조 방법 중 보다 적절한 단조방법인 압조 단조에 있어서 일반적으로 사용되고 있는 SM10C에 대한 유한요소 해석을 수행하였으며, 제품의 형상비에 따라 폴딩 결함의 발생 유무를 검토하고, 폴딩 결함 없이 단조하기 위한 중공 플랜지의 형상한계 비를 제시하였다.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.229-238
• /
• 1999

In this study, double bond, unsaturated group was introduced to the main chain of EVA by chemically treating EVA, nondiene polymer. Benzene sulfonic acid, ENB and DCPD were used as a third element. Also, from blending CR and SBR, conventional synthetic rubber we prepared vulcanizates and examined their physical properties. The datum lead to the following conclusion that some problems were modified; limited temperature in use and mechanical properties like hardness, tensile strength, tensile stress, and elongation rate of thermoplastic EVA, keeping the following advantages of original EVA; green strength, injection molding by Pressure, adhesion, tackiness, dimensional stability, and ozone resistance, etc. It is expected that continuous research of the modification between nondiene and diene polymer will improve what were shown disadvantages in synthetic polymer; processing, oxidation resistance, and adhesion. In addition, it will be possible to continue process of rubber products by utilizing possible fluidity for fusion of EVA.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.9
• /
• pp.37-46
• /
• 2011

The compression index, which represents the compressibility of clay, is generally obtained from the consolidation test, or has been predicted by empirical correlations with soil properties. In this study, the results of consolidation tests on natural and reconstituted Busan and Inchon clays are analyzed to figure out the sedimentation state and its effect on empirical correlations. Results of analysis show that the void index of Busan clay is higher than SCL while the void index of Inchon clay is lower than SCL. By comparing prediction errors with ${\Delta}e_r$, which represents the sedimentation state of clay, it is shown that errors predicting the compressibility based on the liquid limit and plasticity index decrease as ${\Delta}e_r$ increases. Supplemented correlations predicting the compression index of Busan and Inchon clays are suggested using these relationships.

• Computational Structural Engineering
• /
• v.4 no.3
• /
• pp.79-88
• /
• 1991

The procedure of the elastic response spectrum method which is used in the codes of many countries involves the computation of a static horizontal substitute loading resulting from the earthquake. The substitute loading is divided by a behavioral factor in order to take energy dissipation due to the real nonlinear structural behavior and damping effects ect. into account. The behavioral factors widely used in many countries are based not on the exact calculation but only on the empirical data. In order to determine the behavioral factors analytically, it is necessary to define the limit state of structures as a first step. In this work, the methods of the determination of limit state for the steel structures are discussed in the geometric, serviceabile and material apsects, and the behavioral factors for the three types of structures are calculated.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.5
• /
• pp.447-454
• /
• 2015

The researches on circular hollow section(CHS) connections have been conducted continuously because of development of material properties and complex local behavior of the connections. The purpose of this study is that the effects of material strength and chord wall slenderness on chord plastification and strength of CHS X-joint truss connection under compression on branch member were evaluated. To this end, finite element analyses were performed for various connections, using ANSYS Mechanical APDL program. Based on the analysis results, the design strength of the connections according to chord plastification limit state in KBC were examined. Finally, special considerations for CHS X-joint connection design were suggested.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.265-265
• /
• 2014

일반적으로 태양전지 및 반도체 공정에서 불순물 주입 과정인 도핑(Doping)공정은 크게 몇 가지 방법으로 구분해 볼 수 있다. 소성로(Furnace)를 이용하여 열을 통해 불순물을 웨이퍼 내부로 확산시키는 열확산 방법과 진공 챔버 내부에서 전자기장을 걸어 이온을 극도로 가속시켜 진행하는 이온 주입(Ion implantation)이나 이온 샤워(Ion shower)를 이용한 도핑 방법이 있다. 또한 최근 자외영역 파장의 레이저광을 조사하여 광화학 반응에 의해 도펀트 물질를 분해하는 동시에 조사 부분을 용해하여 불순물을 도포하는 기법인 레이져 도핑(Laser doping) 방법이 개발중이다. 그러나 레이져나 이온 도핑 공정기술은 고가의 복잡한 장비가 필요하여 매출 수익성 및 대량생산에 비효율적이며 이온 주입에 의한 박막의 손상을 치료하기 위한 후속 어닐링(Post-annealing) 과정이 요구되는 단점을 가지고 있고 열확산 도핑 방법은 정량적인 불순물 주입 제어가 어렵고 시간 대비 생산량의 한계가 있다. 반면 대기압 플라즈마로 도핑을 할 경우 기존에 진공개념을 벗어나 공정상에서 보다 저가의 생산을 가능케 할 뿐아니라 멀티 플라즈마 소스 개발로 이어진다면 시간적인 측면에서도 단연 단축시킬 수가 있어 보다 대량 생산 공정에 효과적이다. 따라서 본 연구에서는 새로운 도핑 방법인 대기압 플라즈마를 이용한 도핑 공정기술의 가능성을 제안하고자 도핑 공정 시 웨이퍼 내 전류 패스(Current path)에 대한 메카니즘을 연구하였다. 대기압 플라즈마 방전 시 전류가 웨이퍼 내부에 흐를 때 발생되는 열을 이용하여 도핑이 되는 형식이란 점을 가정하고 이 점에 대한 원리를 증명하고자 실험을 진행하였다. 실험 방식은 그라운드(Ground) 내 웨이퍼의 위치와 웨이퍼 내 방전 위치에 따라 적외선 화상(IR image: Infrared image) 화상을 서로 비교하였다. 적외선 화상은 실험 조건에 따라 화상 내 고온의 표식이 상이하게 변하는 경향성을 나타내었다. 이 고온의 표식이 전류 패스라는 점을 증명하고자 시뮬레이션을 통해 자기장의 전산모사를 한 결과 전류 패스의 수직 방향으로 자기장이 형성이 됨을 확인하였으며 이는 즉 웨이퍼 내부 전류 패스에 따라 도핑이 된다는 사실을 명백히 말해주는 것이며 전류 패스 제어의 가능성과 이에 따라 SE(Selective Emitter) 공정 분야 응용 가능성을 보여준다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.214-217
• /
• 2004

In this paper, a Ka-band LTCC (low temperature co-fired ceramic) narrow bandpass filter (BPF) is firstly presented. This BPF shows very narrow 3dB fractional bandwidth of 4.5 ％ centered at 28.7㎓. The advantages of multi-layered LTCC technology such as high integration and vertical stacking capabilities were employed to design three-dimensional interdigital end-coupled embedded microstrip narrow BPF. The difficulties in controlling the precise distance between two adjacent resonators in LTCC end-coupled BPF were overcome by locating the resonators on different layers. The measured insertion loss is 3dB at 28.7㎓, pass band is from 27.9 ㎓ to 29.2 ㎓, and the return loss in the pass band is less than 10 dB.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.93-107
• /
• 2005

The estuary of Nakdong River area including Noksan industrial complex and Busan New Port is composed of thick unconsolidified sediments containing abundant clay, and thus is a potential hazardous area of ground subsidence. We analyzed mineral compositions and geotechnical properties of the clay sediments that sampled from 4 boreholes of the area, and examined vertical variations and their correlations. The results showed correlations between some mineral constituents and geotechnical properties of clay sediments. A positive correlation showed between quartz content and wet unit weight, whereas a negative correlation showed between quartz content and liquid limit. Feldspar content and water content showed a negative correlation, whereas content of clay minerals and liquid limit showed a positive correlation. And also, there is a negative correlation between content of clay minerals and wet unit weight. Correlation equations are obtained from the multiple regression analyses among plastic index, content of clay mineral, smectite and clay fraction.