• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.121.1-121.1
• /
• 2011

현재 상용화되고 있는 단결정 실리콘 태양전지는 알루미늄 페이스트를 이용하여 후면의 전 영역에 전계를 형성한다. 최근에는 고효율을 얻기 위하여 후면에 패시베이션 효과와 장파장에 대한 반사도를 증가 시키는 SiNx막을 증착 후, 국부적으로 전계를 형성하는 국부 후면 전극(Local back surface field)기술이 연구되고 있다. 본 연구에서는 전면만 텍스쳐 된 단결정 실리콘 웨이퍼를 이용하였다. Plasma Enhanced Chemical Vapor Deposition(PECVD)를 이용하여 전,후면에 SiNx를 증착 하였고 후면의 국부적인 전극 패턴 형성을 위하여 SiNx 식각용 페이스트를 사용한 스크린 프린팅 기술을 이용하였다. 스크린 프린팅을 이용하여 패턴이 형성된 후면에 알루미늄을 인쇄 한 후 Rapid Thermal Process(RTP)를 이용하여 소성 공정 조건을 변화시켰다. 소성 조건 동안 형성되는 후면 전계층은 peak 온도와 승온속도, 냉각 속도에 따라 형상이나 특성이 변화하기 때문에 소성 조건을 변화시키며 국부적 후면 전계 형성의 최적화에 관한 연구를 수행하였다. 패이스트를 이용하여 SiNx를 식각 후 광학 현미경(Optical Microscopy)을 사용하여 SiNx의 식각 유무를 살펴보았고, RTP로 형성된 국부 전계층의 형성 두께, 주변 부분의 형상을 살피기 위해 도핑 영역을 혼합수용액으로 식각하여 주사 전자 현미경(SEM)을 이용하여 관찰 하였다. 또한 후면의 특성을 살펴보기 위해 분광 광도계(UV/VIS/NIR Spectrophotometer)를 사용하여 후면 SiNx층의 유무에 따른 반사도를 비교, 측정 하였다.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.513-520
• /
• 2002

This study is to evaluate the structural performance of columns in concrete moment frame. For this purpose the results of previous experimental studies were collected and compared. The experimental variables considered in this study are existance of lap splice within the possible plastic hinge region during an earthquake, ratio of longitudinal reinforcement axial load and the transverse reinforcement ratio. The strength, deformation, ductility capacity and the length of plastic hinge are compared in this study.

• Transactions of Materials Processing
• /
• v.32 no.6
• /
• pp.303-310
• /
• 2023

Electrohydraulic forming(EHF), one of the high-speed forming method, can supplement the weak point of previous forming process such as deep-drawing and electromagnetic forming. Indeed, EHF is time-consuming process during installing wire before experiment that hard to apply to industry. In this research, applying wireless electrode, the formability of SUS430 sheet was compared through EHF experiments using wire-installed electrode and the other, wireless. Although the power was a little lacking, the advantages of the experiment using wireless electrode could be confirmed with checking the optimal location of electrodes where the plasma is generated and comparing free-bulging height depending on former and later condition of electrodes with performing several single and multistage experiments for same voltage, 6 kV.

• Journal of Life Science
• /
• v.19 no.6
• /
• pp.825-831
• /
• 2009

The purpose of this study was to investigate the influences of immune function and respiratory system on aerobic exercise of 75 %HRmax intensity in an exposed acute hypobaric hypoxic environment. The subjects were 20 male college students, 10 of which were soccer players (19.6${\pm}$0.8 yr, BMI 22.3${\pm}$1.0, V02max 56.5${\pm}$4.8 mljkgjmin) and 10 general students (22.2${\pm}$2.3 yr, BMI 22.7${\pm}$2.1, $VO_{2max}$ 50.5${\pm}$6.6 ml/kg/min). Items of measurement after exercise on level and high altitude were $O_{2}$, $CO_{2}$, ventilation (VE), respiratory frequency, respiratory quotient, RBC, MCV, MCH, MCHC, Hb, Hct, reticulocyte, WBC, neutrophil, lymphocyte, monocyte, basophil, and immunoglobulin (IgA, IgD, IgG, IgM). As the result of the verifying hypothesis, these results may suggest three new findings: first, to produce hypoxic ventilatory depression not only at level land but also at 3,000 m high altitude during 30 minute aerobics exercise of 75 %HRmax intensity, second to be more excellent for soccer players in adaptation and sensibility on response of respiratory system at high altitude, and third, to change each other by regular exercise habits or altitude in the monocyte.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.81-84
• /
• 2004

본 논문은 스크린 프린트 방식을 이용하여 두께 $18{\mu}m$의 ZnS:(Cu,Al) 필름을 제조하여 미세구조와 결정성을 분석하고 형광체로써의 특성을 평가하였다. 영상획득에는 포항 가속기 연구소의 싱크로트론을 이용하였으며 CMOS 영상 센서를 사용하여 DR의 간접방식을 구현하였다. 특성 평가를 위해 SEM 측정, 발광 강도 측정을 하였고, 단색광(Beam size $5mm{\times}2mm$)을 사용하여 test phantom 영상과 물고기 영상을 획득하였다. 획득한 영상의 평가를 위해서 test phantom 영상의 MTF 측정을 하였다 제조된 ZnS:(Cu,Al) 필름의 표면은 육방정계 구조를 가졌으며, 5lp/mm는 73.8%, 10lp/mm는 38.9%, 15lp/mm는 15.4%, 20lp/mm는 12.2%의 MTF를 가졌다. 물고기 영상을 통하여 ZnS:(Cu,Al) 필름을 이용한 고해상도 미세구조영상 획득의 가능성을 확인하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.111-117
• /
• 2017

This study examined the material properties of Korean rice husk ash (RHA) according to the manufacturing process, and evaluated the feasibility of its use as a new admixture for high strength concrete. For this purpose, its particle size distribution, chemical composition, and microstructure were analyzed under various parameters, such as calcination temperature ($400^{\circ}C$, $650^{\circ}C$, and $900^{\circ}C$) and the inclusion of a milling process. X-ray fluorescence analysis confirmed that the silicon oxide ($SiO_2$) content of RHA was improved to more than 92% with a calcination process at $650^{\circ}C$ or higher. In addition, microstructural analysis showed that the RHA calcined at $650^{\circ}C$ has a porous structure. Because of this, the absorption capacity of the RHA was improved. On the other hand, when the milling process was applied, the porous structure was destroyed; thus, the absorption capacity tended to decrease further. Based on the analysis results, it was concluded that RHA calcined at $650^{\circ}C$ can be used as an admixture for high strength concrete, which possesses functions of both a shrinkage reducing agent and a pozzolanic activator.

• Childhood Kidney Diseases
• /
• v.11 no.1
• /
• pp.32-40
• /
• 2007

Purpose : We performed this study to determine the incidence of acute renal failure(ARF) in birth asphyxia and to correlate the severity of asphyxia and hypoxic-ischemic encephalopathy (HIE) and ARF in asphyxiated neonates. Methods : Data was retrospectively collected from the medical records of 33 patients with neonatal asphyxia and of 33 neonates with no asphyxia. On the basis the 5-minute Apgar score, the asphyxiated neonates were further grouped into mild(6 or 7), moderate(4 or 5), and severe asphyxia(3 or less). Asphyxiated neonates with HIE were staged by the Sarnat and Sarnat scoring system. We compared serum creatinine, blood urea nitrogen, electrolytes, and urine output on day 3 of life and the incidence and severity of intraventricular hemorrhage(IVH) between each group. Results : ARF occurred in 8(24.2%) asphyxiated neonates. Of these, 3(37.5%) were oliguric, while 1(10.0%) patient with mild asphyxia, 2(18.2%) of moderate asphyxia, and 5(41.7%) with of severe asphyxia had ARF(P>0.05). One(25%) patient with stage I HIE, 4(50%) with stage II HIE, and 3(75%) of HIE with stage III HIE developed ARF(P<0.01). There was no statistical correlation between the severity of asphyxia and HIE stage. One(7.7%) patient with grade 1 IVE, 0(0.0%) with grade 2 IVH, 2(66.7%) with grade 3 IVH, and 2(100.0%) with grade 4 IVH had ARF(P<0.01). Mortality was higher in asphyxiated neonates with ARF(P<0.05). There was no significant difference between the oliguric and non-oliguric renal failure. Conclusion : We found that the greater the degree of HIE, the higher was the incidence of ARF. Asphyxiated neonates with ARF had a poorer prognosis.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.4 s.65
• /
• pp.423-433
• /
• 2003

Many study have been performed to describe the elastic and inelastic behavior of H-shaped beams with web openings that generally concentrated on the monotonic loading condition and concentric web opening. The findings of the studies led Darwin to propose formulas for the design of beams with web openings considering local buckling. While the formulas are simple and useful in real situation, more studies arc needed on their cyclic loading condition. In this experimental study, 12 H-shaped beams with web openings under cyclic loading condition were investigated. The dimension criteria based on the formulas proposed by Darwin were examined. The suitability of existing design formulas and the effects of plastic hinges on beams with web openings and of local buckling around web openings on the beam strength under cyclic loading were also studied. This was done by observing their behavior with various dimensional openings, eccentric per cent, and stiffeners.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.393-404
• /
• 2020

We observed changes in the properties of the glaze layer according to the content of iron oxide and inferred the composition, content, and environment of the materials used in the past during the production process of black ware. First, experiments were conducted using different ratios of iron oxide, feldspar, calcite, and ash at different temperatures and firing environments; the characteristics of glaze were classified into five groups in the oxidation environment. Different properties were identified in the reducing environment above 1200℃. The crystal identified in the experiment was similar to the glaze characteristics in the excavated black ware. The crystal phase appeared in four groups: band shape, circular, arborescent phase, and needle crystal, depending on the change in the content of iron oxide. However, the difference in crystals did not appear significantly at high temperatures. In addition, crystals of glaze were divided into two groups depending on the component ratio. The presence or absence of feldspar is thought to affect crystallinity and amorphous iron oxide and the changes in the glaze layer changed substantially depending on the amount of iron oxide. In particular, it was confirmed that the aspects of iron oxide in the oxidation and reduction environments were different and, therefore, crystallization due to the firing environment also affected the optical characteristics.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.9
• /
• pp.17-27
• /
• 2016

Parial drainage characteristics of clayey silt with low plasticity from the west coast (Incheon and Hwaseong) was analyzed using CPTU based existing correlation equations and compulsory replacement method. Generally, the estimated $OCRs={\kappa}{\cdot}((q_t-{\sigma}_{vo})/{\sigma}^{\prime}_{vo})$ using Powell and Quartman(1988) were higher than those obtained by the oeodometer tests. These trends were noticeable for the layers containing a lot of silty and sand soils. The assessment of partial drainage conditions was performed through Schnaid et al. (2004)'s equation; it is based on plotting the normalized cone resistance, $Q_t$ versus the pore pressure parameter, $B_q$ in combination with the strength incremental ratio, $s_u/{\sigma}^{\prime}_{vo}$ to the CPTU data. It is evident that more than half of the data fall in the range where $B_q$ < 0.3, corresponding to the domain in which the partial drainage prevails when testing normally consolidated soils at a standard rate of penetration (2 cm/s). To estimate the replacement depth of clayey silt with low plasticity, back analysis was carried out to evaluate the internal friction angle based on where the design depths are equal to the checked depths using bearing capacity equation. The internal friction angels obtained from the back analysis tended to increase as the plasticity index decreases, which is ranged approximately from ${\varphi}^{\prime}=2^{\circ}$ to ${\varphi}^{\prime}=7^{\circ}$.