• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.163-178
• /
• 1997

현재 각종 미사일의 추진기관용 연소관을 제작하는데 광범위하게 이용되고 있는 유동성 형공정에 대하여 강소성 구성방정식을 이용 유한요소해석을 수행하였다. 종전의 단일 롤러에 의한 해석과는 달리 3개의 롤러에 의한 연소관의 점진 소성변형을 고려하였으며. 이에 따른 각 룰러의 연소관에 대한 소성변형, 응력분포가 관찰, 분석되었다. 해석 결과 예비성형체의 두께에 따라 소성변형 형태와 그에 따르는 응력분포에 많은 차이가 나는 것으로 밝혀졌다. 또 이상적인 유동성형 공정조건하에서 반경 방향으로의 연소관의 유효 소성변형도는 거의 균일하게 나타났다.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.317-323
• /
• 2008

In the current study, A model for the flow analysis of fresh and highly flowable concrete has been developed using a particle method, the moving particle semi-implicit (MPS) method. The phenomena on the flow of concrete has been considered as a visco-plastic flow problem, and the basic governing equation of concrete particle dynamics has been based on the Navier-Stokes equation in Lagrangian form and the conservation of mass. In order to formulate a visco-plastic flow constitutive law of fresh concrete, concrete is modeled as a highly viscous material in the state of non-flow and as a visco-plastic material in the state of flow after reaching the yield stress of fresh concrete. A flow test of fresh concrete in the L-box was simulated and the predicted flow was well matched with the experimental result. The developed method was well showed the flow motion of concrete particles because it was formulated to be based on the motion of visco-plastic fluid dynamics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.718-725
• /
• 2016

In this study, the plastic flow curve of commercially pure titanium sheet (CP Ti) actively used in the plate heat exchanger etc., was evaluated. The plastic flow curve known as hardening curve is a key factor needed in conducting finite element analyses (FEA) for the forming process of a sheet material. A hydraulic bulge test was performed on the CP Ti sheet and the strain in this test was measured using the DIC method and ARAMIS system. The measured true stress-true strain curve from the hydraulic bulge test (HBT) was compared with that from the tensile test. The measured true stress-true strain curve from the hydraulic bulge test showed stable plastic flow curve over the strain range of 0.7 which cannot be obtained in the case of the uniaxial tensile test. The measured true stress-true strain curve from the hydraulic bulge test can be fitted well by the hardening equation known as the Kim-Tuan model.

• Tunnel and Underground Space
• /
• v.10 no.2
• /
• pp.173-179
• /
• 2000

The influence of the plastic flow rules on the elasto-plastic behaviour of a discrete joint element was investigated by performing the numerical direct shear tests under both constant normal displacement and normal displacement conditions. The finite interface elements obeying Plesha’s joint constitutive law was used to allow the relative motion of the rock blocks on the joint surface. Realistic results were obtained in the tests adopting the non-associated flow rule, while the associated flow rule overestimated the joint dilation. To overcome the computational drawbacks coming from the non-symmetric element stiffness matrix in the conventional non-associated plasticity, the symmetric formulation of the tangential stiffness matrix for a non-associated joint element was proposed. The symmetric elasto-plastic matrix it derived by assuming an imaginary equivalent joint with associated flow rule which shows the same plastic response as that of original Joint with non-associated flow rule. The validity of the formulation was confirmed through the numerical direct shear tests under constant normal stress condition.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.342-342
• /
• 1994

(1) 바셀린은 30 $^{\circ}C$ 이하에서는 항복치를 갖는 의소성 유동거동을 나타내며 이때의 유동특성은 Herschel-Bulkley의 유동모델과 일치한다. (2) 30-50 $^{\circ}C$ 범위에서는 Bingham 모델에 따른 이상 소성 유동 거동을 나타낸다. (3) 50 $^{\circ}C$ 이상의 고온에서는 항복치를 갖지 않는 순수한 Newton 점성유체로 간주할 수 있다. (4) 바셀린의 유동곡선은 전단속도의 단계적 증감에 따라 비가역적인 히스테리시스 루프를 그리나 루프의 면적은 온도 증가에 따라 감소한다. (5) 큰 전단속도로부터 급격히 낮은 전단속도를 부가하면 응력의 평형치에 도달할 때까지 상당한 시간을 필요로 한다. (6) 40 $^{\circ}C$ 이상 온도에서의 유동거동은 시간에 무관하다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.89-103
• /
• 1997

The flow forming process which is one of the technologies to manufacture the various missile propulsion combustion chambers, was analyzed using the rigid plasticity finite element modeling. The numerical analysis was performed using 3 rollers which forms the basic tools for the plastic deformation of the tubes. As a result of this study, the distribution of the plastic strain and the stress are obtained and compared. It was found that there exists a significant difference in the plastic deformation as well as the stress distribution due to the preform initial thickness as a result of these numerical experiments. Moreover, under ideal process condition, flow forming process results in a uniform plastic deformation in the radial direction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.829-837
• /
• 1992

This paper presents a new approach for the analysis of hot strip rolling processes. The approach is based on the finite element method and capable of predicting velocity field in the strip, temperature field in the strip, temperature field in the roll, and roll pressure. Basic finite element formulations for heat transfer analysis are described with emphasis on the treatment of numerical instability resulting from a standard Galerkin formulation. Comparison with the theoretical solutions found in the literature is made for the evaluation of the accuracy of the temperature solutions. An iterative scheme is developed for dealing with strong correlations between the metal flow characteristics and the thermal behavior of the roll-strip system. A series of process simulations are carried out to investigate the effect of various process parameters including interface friction, interface heat transfer coefficient, roll speed, reduction in thickness, and spray zone. The results are shown and discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1314-1321
• /
• 1992

In analyzing the plastic flow of axisymmetric tube extrusion a new method of formulation using the stream function approach and upper-bound theorem is proposed which permits the prediction of plastically deformed zone in analytic expression as well as metal flow. It is shown that the formulation proposed in this work covers the solid extrusion and tube extrusion in axisymmetric case. The effect of some process parameters such as area reduction, the ratio of radii(inner radius to outer radius) and friction factor on extrusion pressure, deformation zone and plastic flow through stream-lined dies has been studied. The presented theoretical analysis can be effectively used for the prediction of deformation zone and plastic flow.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.06a
• /
• pp.49-68
• /
• 1999

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.285-299
• /
• 1993

The objective of the present study is to analyze material flow in the metal forming processes by using computer simulation and experiment with model material, plasticine. A UBET program is developed to analyze the bulk flow behaviour of various metal forming problems. The elemental strain-hardening effect is considered in an incremental manner and the element system is automatically regenerated at every deforming step in the program. The material flow behavior in closed-die forging process with rib-web type cavity are analyzed by UBET and elastic-plastic finite element method, and verified by experiments with plasticine. There were good agreements between simulation and experiment. The effect of corner rounding on material flow behavior is investigated in the analysis of backward extrusion with square die. Flat punch indentation process is simulated by UBET, and the results are compared with that of elastic-plastic finite element method.